1. مقدمه
Thank you for choosing the SKIL SR250801 Corded Detail Sander. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before using the sander and keep it for future reference.
The SKIL SR250801 is a compact and powerful detail sander designed for fine finishes and intricate sanding tasks. It features a 1-amp motor, delivering 12,000 orbits per minute (OPM) for smooth performance. Its micro-filtration system and ergonomic design ensure comfortable use and efficient dust management.
Figure 1: SKIL SR250801 Corded Detail Sander
2. اطلاعات ایمنی
Always follow basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury.
هشدارهای ایمنی عمومی:
- از محافظ چشم استفاده کنید: همیشه از عینک ایمنی یا عینک ایمنی با سپر جانبی استفاده کنید.
- Wear a Dust Mask: Sanding operations can create significant dust. Use a dust mask or respirator to prevent inhalation of harmful particles.
- قطعه کار ایمن: همیشه clamp or otherwise secure the workpiece to a stable surface. Holding the workpiece by hand may result in loss of control and injury.
- محل کار را تمیز نگه دارید: نواحی بهم ریخته و نیمکت ها باعث آسیب می شوند.
- از روشن شدن ناگهانی خودرو جلوگیری کنید: Ensure the switch is in the OFF position before plugging in the tool.
- وقتی از ابزار استفاده نمیکنید، آن را از برق بکشید: Always unplug the sander from the power source before making adjustments, changing accessories, or storing the tool.
- زیاده روی نکنید: همیشه پای خود و تعادل خود را حفظ کنید.
- از ابزار مناسب استفاده کنید: ابزار یا ضمیمه را مجبور به انجام کاری که برای آن طراحی نشده است، نکنید.
۲. چه چیزهایی در جعبه است؟
Your SKIL SR250801 Corded Detail Sander package should include the following items:
- 1A Mouse Sander (SKIL SR250801)
- 3 Sanding Papers (120 grit)
- Dust box with Micro-filtration
Figure 2: Included items: Sander and sanding papers
4. راه اندازی
4.1 Attaching Sanding Paper
- مطمئن شوید که سنباده از منبع تغذیه جدا شده است.
- Align the holes on the sanding paper with the holes on the sander's base plate. These holes are crucial for efficient dust collection.
- Press the sanding paper firmly onto the hook-and-loop base plate. The hook-and-loop system ensures a secure attachment and easy replacement.
4.2 Attaching the Dust Box
- مطمئن شوید که سنباده از برق کشیده شده است.
- Slide the dust box onto the dust port at the rear of the sander until it clicks securely into place.
- Verify that the dust box is firmly attached to prevent dust leakage during operation.
ویدئو ۱: محصول تمام شدview - Demonstrates attaching sanding paper and dust box.
5. دستورالعمل های عملیاتی
5.1 روشن/خاموش کردن
- To turn the sander ON, slide the dust-sealed ON/OFF switch to the 'I' position.
- To turn the sander OFF, slide the switch to the 'O' position.
۵.۳ تکنیک سنباده کاری
- Hold the sander firmly with both hands. The ergonomic design and soft rubber grip are intended to reduce hand fatigue.
- Apply light, even pressure to the workpiece. Excessive pressure will not speed up sanding and may damage the surface or the tool.
- سنباده را با حرکات صاف و همپوشانی روی سطح حرکت دهید.
- For corners and tight spaces, utilize the pointed tip of the sander's base plate.
Figure 3: Proper sanding technique with the detail sander
5.3 جمع آوری گرد و غبار
The sander is equipped with a micro-filtration dust box to collect sanding debris. For enhanced dust collection, a 1-1/4 inch dust port allows for attachment to a vacuum system (not included).
Video 2: Demonstrates the sander's performance and dust collection.
6. تعمیر و نگهداری
Regular maintenance ensures optimal performance and extends the life of your tool. Always unplug the sander before performing any maintenance.
6.1 Emptying and Cleaning the Dust Box
- Detach the dust box from the sander by pulling it away from the dust port.
- گرد و غبار جمع شده را در یک ظرف زباله خالی کنید.
- Clean the micro-filtration filter inside the dust box by tapping it gently or using compressed air to remove fine dust particles.
- Reattach the clean dust box securely to the sander.
Figure 4: Detachable dust box for easy cleaning
6.2 Replacing Sanding Sheets
- When sanding paper becomes worn or ineffective, peel it off the hook-and-loop base plate.
- Attach a new sanding sheet as described in Section 4.1.
6.3 نظافت عمومی
- سطح بیرونی سنباده را با یک دستمال تمیز و نرم پاک کنید.amp پارچه از مواد شیمیایی خشن یا پاک کننده های ساینده استفاده نکنید.
- سیم برق را به صورت دورهای از نظر هرگونه آسیبدیدگی بررسی کنید. در صورت آسیبدیدگی، آن را توسط یک تکنسین خدمات واجد شرایط تعمیر کنید.
7 عیب یابی
If you encounter issues with your SKIL SR250801 Corded Detail Sander, refer to the following common problems and solutions:
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| سنباده روشن نمی شود | No power supply; Switch in OFF position; Damaged cord | Check power outlet; Ensure switch is ON; Inspect cord for damage and seek professional repair if needed. |
| جمعآوری ضعیف گرد و غبار | Dust box full or improperly attached; Sanding paper holes not aligned; Clogged filter | Empty and reattach dust box; Align sanding paper correctly; Clean the micro-filtration filter. |
| لرزش بیش از حد | Worn sanding paper; Improperly attached sanding paper; Internal issue | Replace sanding paper; Reattach sanding paper correctly; If problem persists, contact customer support. |
| Sander not sanding effectively | Worn sanding paper; Incorrect grit for task; Insufficient pressure | Replace sanding paper; Use appropriate grit for the material; Apply light, even pressure. |
If you encounter a problem not listed here or if the suggested solutions do not resolve the issue, please contact SKIL customer support.
8. مشخصات
| ویژگی | مشخصات |
|---|---|
| شماره مدل | SR250801 |
| موتور | 1 Amp |
| مدار در دقیقه (OPM) | 12,000،XNUMX OPM |
| گرد و غبار | Micro-filtration dust box, 1-1/4" vacuum port |
| Sanding Sheet Attachment | قلاب و حلقه |
| وزن مورد | 2.31 پوند |
| ابعاد محصول | 6.77 x 4.06 x 5.2 اینچ |
| نوع دانهبندی (شامل) | متوسط (120 گریت) |
| مواد | مخلوط کنید |
9. گارانتی و پشتیبانی
For detailed warranty information, please refer to the warranty card included with your product or visit the official SKIL website. If you require technical assistance, replacement parts, or have any questions regarding your SKIL SR250801 Corded Detail Sander, please contact SKIL customer support.
SKIL Customer Support:
Webسایت: www.skil.com
Phone: Refer to your product documentation for regional contact numbers.
