Legami Micro Night Dream LED Glasses Light Instruction Manual

مقدمه

Welcome to the Legami Micro Night Dream LED Glasses Light. This compact and versatile light is designed to clip onto your glasses, providing convenient illumination for various tasks such as reading, crafting, or working in low-light conditions. Please read this manual carefully before use to ensure proper operation and maintenance.

اطلاعات مهم ایمنی

• Keep this device out of reach of small children to prevent choking hazards from small parts.
• Do not look directly into the LED light for extended periods, as it may cause eye strain or temporary vision impairment.
• Do not expose the device to water, excessive moisture, or extreme temperatures. This product is not waterproof.
• Dispose of used batteries responsibly according to local regulations. Do not incinerate batteries.
• سعی نکنید دستگاه را جدا یا تغییر دهید، زیرا این کار گارانتی را باطل می‌کند و ممکن است باعث آسیب یا جراحت شود.

محتویات بسته

• 1 x Legami Micro Night Dream LED Glasses Light
• توجه: باتری‌ها شامل نمی‌شوند و باید جداگانه خریداری شوند.

راه اندازی

نصب باتری

The Legami Micro Night Dream LED Glasses Light requires 1.5 Volt DC batteries (not included) for operation.

1. محفظه باتری را روی واحد چراغ پیدا کنید.
2. پوشش محفظه را با دقت باز کنید.
3. باتری‌ها را وارد کنید و از قطبیت صحیح (+/-) مطابق آنچه در داخل محفظه نشان داده شده است، اطمینان حاصل کنید.
4. درب محفظه باتری را محکم ببندید تا در جای خود قرار گیرد.

شرح تصویر: نمای نزدیک view of the Legami Micro Night Dream LED Glasses Light, detached from glasses, showing its compact design and the area where batteries are inserted.

اتصال به شیشه

The light features a convenient clip mechanism for easy attachment to most glasses frames.

1. Gently open the clip on the light unit.
2. Position the clip onto the frame of your glasses, typically on one of the temples or the bridge.
3. Ensure the light is securely fastened and does not obstruct your vision. Adjust its position for optimal comfort and light direction.

Image description: The Legami Micro Night Dream LED Glasses Light clipped onto the right side of a pair of black-framed glasses, with its LED light emitting a bright white glow.

دستورالعمل های عملیاتی

روشن/خاموش کردن

The light is operated via a tactile switch located on the unit.

1. To turn on the light, gently press the tactile switch.
2. برای خاموش کردن چراغ، کلید را دوباره فشار دهید.

Image description: The Legami Micro Night Dream LED Glasses Light clipped onto the right side of a pair of black-framed glasses, with its LED light currently off.

تنظیم زاویه نور

The light head can be pivoted to direct illumination precisely where needed.

1. Gently pivot the light head to achieve the desired angle for your task.

نگهداری و مراقبت

• Clean the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
• If the light will not be used for an extended period, remove the batteries to prevent potential leakage and damage to the device.
• دستگاه را در جای خشک و خنک و دور از نور مستقیم خورشید و دمای شدید نگهداری کنید.

عیب یابی

چراغ روشن نمی شود

• Check if batteries are installed correctly with the positive (+) and negative (-) terminals aligned properly.
• Ensure batteries are not depleted. Replace with new batteries if necessary.
• Verify the battery compartment cover is securely closed.

نور کم است

• This usually indicates low battery power. Replace batteries with new ones.

Light Falls Off Glasses

• Ensure the clip is properly secured to a stable and appropriate part of the glasses frame.
• Avoid excessive or sudden movements that might dislodge the light.

مشخصات محصول

گارانتی و پشتیبانی

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase. For specific warranty terms, claims, or technical support, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty validation.