1. مقدمه
This manual provides essential information for the safe and effective use of your lightmaXX TOUR CASE. This robust flight case is designed to securely transport and protect up to four FLAT PAR COB, QUAD, MINI, TRI, or Vega PAR COB spotlights. Please read this manual thoroughly before using the product to ensure proper handling and longevity.
Figure 1: The lightmaXX TOUR CASE in its closed state, showcasing its durable exterior and secure latches.
2. راه اندازی
- باز کردن بسته بندی: Carefully remove the TOUR CASE from its packaging. Inspect for any signs of damage incurred during shipping.
- باز کردن پرونده: Release the butterfly latches located on the front of the case. Lift the lid to open.
- پیکربندی داخلی: The case features internal dividers designed to accommodate up to four PAR COB spotlights. Ensure these dividers are correctly positioned to snugly fit your specific models.
- Placing Fixtures: Gently place each spotlight into its designated compartment. Ensure they are seated securely and do not shift excessively.
- ختم پرونده: Lower the lid and engage all butterfly latches. Ensure they are fully secured to prevent accidental opening during transport.
Figure 2: The TOUR CASE opened, revealing four padded compartments for individual spotlights.
۴. کار با کیس
The lightmaXX TOUR CASE is designed for safe transport and storage of your lighting equipment.
- حمل و نقل: Always ensure the case is fully closed and all latches are secured before moving. Use the integrated handles for lifting and carrying. Avoid dropping or subjecting the case to severe impacts.
- ذخیره سازی: Store the case in a dry environment, away from extreme temperatures and direct sunlight. When stacking, ensure the surface is stable and the weight is evenly distributed.
شکل 3: سمت view of the TOUR CASE, highlighting the robust carrying handle for easy transport.
4. تعمیر و نگهداری
- تمیز کردن: قسمت بیرونی قاب را با دستمال پاک کنیدamp cloth. For stubborn dirt, a mild soap solution can be used. Avoid abrasive cleaners or solvents.
- مراقبت داخلی: Periodically vacuum or wipe the interior foam to remove dust and debris.
- بازرسی سخت افزار: Regularly check all latches, hinges, and handles for proper function and signs of wear. Lubricate moving parts if necessary with a suitable lubricant.
- خسارت: If the case sustains damage, especially to its structural integrity, consider professional repair or replacement to ensure continued protection of your equipment.
5 عیب یابی
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| Latches are stiff or difficult to close. | وجود کثیفی یا آلودگی در مکانیزم؛ عدم روانکاری. | Clean the latch mechanism. Apply a small amount of silicone-based lubricant. |
| Case lid does not close flush. | Items inside are obstructing the lid; bent frame. | Ensure all contents are properly seated. Inspect the case frame for damage. |
| دستهها شل به نظر میرسند. | پیچهای نصب شل شدهاند. | Tighten the mounting screws. Do not overtighten. |
6. مشخصات
- مدل: TOUR CASE 4x FLAT PAR COB, QUAD, MINI, TRI + Vega PAR COB
- برند: lightmaXX
- مرجع سازنده: LIG0013954-000
- مواد: Wood (with aluminum profiles and steel hardware)
- رنگ: Multi-color (Black with silver aluminum)
- ابعاد محصول (L x W x H): ۲۰ × ۵ × ۲ سانتیمتر (تقریباً ۷.۸۷ × ۱.۹۷ × ۰.۷۹ اینچ)
- وزن مورد: ۵۰ گرم (تقریباً ۰.۱۱ پوند)
- کشور مبدا: آلمان
Figure 4: Technical drawing illustrating the dimensions of the lightmaXX TOUR CASE.
7. گارانتی و پشتیبانی
برای اطلاعات مربوط به گارانتی و پشتیبانی مشتری، لطفاً به اسناد ارائه شده در زمان خرید مراجعه کنید یا با فروشنده خود تماس بگیرید. فاکتور خرید خود را برای هرگونه ادعای گارانتی نگه دارید.
