ACETECH AC5000 Airsoft Chronograph User Manual

مقدمه

The ACETECH AC5000 is an advanced airsoft chronograph designed for precise measurement of BB muzzle velocity and rate of fire. Its user-friendly interface and robust design make it an essential tool for airsoft enthusiasts to ensure compliance with field regulations and optimize their equipment's performance.

Front angle view of the ACETECH AC5000 Airsoft Chronograph, showing the orange measurement tunnel and control panel.

ویژگی های کلیدی

• User-friendly interface with 128x64 pixel LCD for clear readings.
• Equipped with a 4-way push button for easy control and navigation.
• Features IR sensor self-calibration for enhanced durability and accuracy.
• Allows direct selection and modification of ammo parameters from the main screen.
• Supports Micro-USB (5V/0.5A) power input (note: no battery charge function via USB).
• Includes a tripod-ready mounting hole (standard camera screw/camcorder tripods).
• Suitable for various BB calibers including 4.5mm, 6mm, 8mm, and 18mm, with a large caliber tube of 24mm.
• Automatic power-off function for power saving.

راه اندازی

نصب باتری

The AC5000 requires two AA batteries for operation. To install:

1. محفظه باتری را در قسمت زیرین دستگاه قرار دهید.
2. درپوش محفظه باتری را باز کنید.
3. دو باتری قلمی (AA) را وارد کنید و از قطبیت صحیح (+/-) اطمینان حاصل کنید.
4. درپوش محفظه باتری را محکم ببندید.

Important: Do not mix old and new batteries. For optimal performance and to prevent battery leakage, remove batteries if the device will not be used for an extended period.

روشن/خاموش کردن

Press the Power Key (usually marked with an 'I' symbol) to turn the device on or off. The LCD screen will illuminate upon activation.

Diagram illustrating the control panel of the ACETECH AC5000, highlighting the LCD display and operation buttons.

دستورالعمل های عملیاتی

انجام یک اندازه گیری

To measure muzzle velocity and rate of fire:

1. Ensure the chronograph is powered on and placed on a stable surface, or mounted on a tripod using the standard camera screw hole on the bottom.
2. Aim your airsoft gun directly through the orange measurement tube. For gas and CO2 guns, maintain a distance of more than 10 cm from the device to avoid smoke interference.
3. Fire a BB through the tube. The device will automatically detect the BB and display the measurement results on the LCD screen.

جلو view of the ACETECH AC5000, showing the clear path for BB measurement.

Understanding the Display (SCR1)

Screen 1 (SCR1) provides real-time information:

• Battery Power Status: Indicated by an icon.
• Rate of Fire (RPM or RPS): Displays shots per minute or second.
• Velocity (m/s or ft/s): Shows the speed of the BB.
• N-th BB bullet shot: Indicates the sequence number of the current shot.

Diagram of Screen 1 on the ACETECH AC5000, showing battery status, rate of fire, and velocity readings.

Setting Ammo Parameters (SCR2 & AMMO Menu)

Screen 2 (SCR2) allows you to select and change ammo parameters. The AMMO menu provides 5 memory slots for setting BB weight (WT) and caliber (CAL), which are used to calculate Joules.

• Use the Up and Down keys to navigate and select ammo parameters.
• Adjust BB weight and caliber according to your ammunition for accurate energy (Joules) readings.

Diagram of Screen 2 on the ACETECH AC5000, illustrating ammo parameter selection.

Reviewing Historical Data (SCR3)

Screen 3 (SCR3) displays historical speed data, storing up to 25 memory slots:

• Press the Up/Down keys to scroll through past measurements (SN, RPM, m/s).
• To clear all historical speed data, press and hold the Up key for 3 seconds.

Diagram of Screen 3 on the ACETECH AC5000, showing the 25 memory slots for recorded data.

تنظیمات منو

Access various settings through the menu options:

• واحد: Change measurement units (RPM, M/S, FPS, JOULE).
• APO (خاموش خودکار): Configure the auto power-off duration (5-60 minutes) for power saving. The device will also shut down automatically when battery power is very low.
• BACK LIGHT: Adjust backlight settings (ON, OFF, AUTO) and brightness (HIGH, MID, LOW).
• تضاد: Adjust LCD contrast (0-10).
• بازنشانی: Restore factory default settings. This will reset the SN (shot number) to 1.

تعمیر و نگهداری

Proper maintenance ensures the longevity and accuracy of your ACETECH AC5000 Chronograph.

• تمیز کردن: Use a soft, dry cloth to clean the exterior of the device. Avoid using abrasive cleaners or solvents. Ensure the measurement tube is free of debris.
• ذخیره سازی: Store the chronograph in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries.
• IR Sensor Calibration: The device features IR sensor self-calibration. If you suspect accuracy issues, refer to the troubleshooting section or perform a factory reset.

عیب یابی

• قرائت های نادرست: Ensure the BB passes cleanly through the center of the measurement tube. Verify that the correct BB weight and caliber are set in the AMMO parameters. For gas/CO2 guns, ensure sufficient distance (over 10 cm) to avoid smoke interference.
• روشن نشدن دستگاه: Check battery installation and ensure batteries are fresh. If using Micro-USB power, ensure the cable and power source are functional.
• مشکلات نمایش: Adjust the contrast setting in the menu. If the screen is unresponsive, try resetting the device to factory defaults.
• "Not working with Nerf": This device is specifically designed for airsoft BBs and is not compatible with Nerf darts.

مشخصات

Detailed comparison table highlighting the specifications of the AC5000 model.

نمایش محصول

گارانتی و پشتیبانی

The ACETECH AC5000 Airsoft Chronograph comes with a 1-year Repair Service against Manufacturer Defects. For technical support or warranty claims, please contact ACETECH customer service through their official channels.