دفترچه راهنمای چاپگر چندکاره لیزری تک رنگ شارپ MX-M503N

مقدمه

This manual provides essential information for the setup, operation, and maintenance of your Sharp MX-M503N Monochrome Laser Multifunction Printer. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

شکل 1: جلو view of the Sharp MX-M503N Monochrome Laser Multifunction Printer, showcasing its compact design with multiple paper trays and a top-mounted document feeder.

محصول تمام شده استview

The Sharp MX-M503N is a versatile A3-sized monochrome multifunction device designed for small to medium workgroups. It integrates printing, copying, and scanning functionalities into a single unit.

ویژگی های کلیدی:

• Monochrome Laser Multifunction Printer (MFP)
• Print, Copy, Scan capabilities
• Print speed up to 50 pages per minute (ppm)
• Standard automatic duplex copying and printing
• 8.5-inch Color Display for intuitive operation
• Standard paper capacity of 1,100 sheets (2 x 500-sheet drawers + 100-sheet bypass)
• 150-sheet Document Feeder with original size detection
• Network connectivity via RJ-45 Ethernet 10/100/1000 Base-T

راه اندازی

باز کردن و قرار دادن:

1. Carefully remove the printer from its packaging. Due to its weight (approx. 210 lbs), it is recommended to use appropriate lifting equipment or assistance.
2. Place the printer on a stable, level surface capable of supporting its weight. Ensure adequate ventilation around the unit.
3. Remove all protective tapes and packing materials from the exterior and interior of the printer, including paper trays and the document feeder.

اتصال برق و شبکه:

1. سیم برق را به ورودی برق چاپگر و سپس به پریز برق دارای اتصال زمین وصل کنید.
2. For network printing and scanning, connect an Ethernet cable from the printer's RJ-45 port to your network router or switch.
3. Optionally, for direct connection, use a USB 2.0 cable to connect the printer to a computer.

بارگذاری کاغذ:

The printer supports paper sizes up to A3 (11" x 17").

1. Open the paper drawers (Tray 1 and Tray 2).
2. Adjust the paper guides to fit the size of the paper being loaded.
3. Load paper into the trays, ensuring it is flat and not exceeding the maximum fill line.
4. The 100-sheet bypass tray can be used for special media or smaller quantities.

شکل 2: نمای نزدیک view of the Sharp MX-M503N's control panel, featuring the 8.5-inch color display and various function buttons, along with the top-mounted automatic document feeder.

دستورالعمل های عملیاتی

Basic Copying:

1. Place the original document face-up in the document feeder or face-down on the scanner glass.
2. On the 8.5-inch color display, select the "Copy" function.
3. Adjust settings such as quantity, paper size, and duplexing as needed.
4. برای شروع کپی کردن، دکمه شروع را فشار دهید.

چاپ از کامپیوتر:

1. Ensure the printer drivers are installed on your computer. Drivers can typically be found on the manufacturer's support webسایت
2. From your application, select "Print" and choose the Sharp MX-M503N as your printer.
3. Configure print settings (e.g., paper source, duplex, quality) in the printer properties dialog.
4. برای ارسال کار به چاپگر، روی «چاپ» کلیک کنید.

اسکن اسناد:

1. سند را روی شیشه اسکنر یا در تغذیه کننده سند قرار دهید.
2. On the printer's display, select the "Scan" function.
3. Choose your scan destination (e.g., network folder, email, USB).
4. Adjust scan settings such as resolution, color mode, and file قالب
5. Press the Start button to initiate the scan.

تعمیر و نگهداری

تمیز کردن روتین:

• مرتباً قسمت بیرونی چاپگر را با یک پارچه نرم و لطیف پاک کنید.amp پارچه
• Clean the scanner glass and the document feeder rollers with a lint-free cloth and a mild glass cleaner to ensure clear scans.

تعویض کارتریج تونر:

• The printer's display will indicate when the toner cartridge needs replacement.
• Refer to the specific instructions provided with your replacement toner cartridge for safe and proper installation.

Paper Jam Clearance:

• If a paper jam occurs, the display will show an error message and indicate the location of the jam.
• Carefully open the indicated covers or trays and gently pull the jammed paper in the direction of the paper path. Avoid tearing the paper.
• Close all covers securely after clearing the jam.

عیب یابی

مشخصات

گارانتی و پشتیبانی

اطلاعات گارانتی:

This Sharp MX-M503N printer comes with a 30-Day Labor & Parts Warranty. This warranty covers defects in materials and workmanship under normal use during the specified period. Please retain your purchase receipt as proof of warranty.

پشتیبانی مشتری:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your vendor or the authorized Sharp service provider. Have your model number (MX-M503N) and serial number ready when contacting support.

For additional resources and driver downloads, visit the official Sharp support webسایت