OBO HANDS K80 Power Supply User Manual

1. مقدمه

This manual provides essential information for the proper installation, operation, and maintenance of the OBO HANDS K80 AC 110-240V to DC12V 3A 36W Power Supply. This device is designed to provide stable and reliable 12V DC power for various access control system applications, including electric locks, access controllers, exit buttons, and RFID-ID readers.

2. اطلاعات ایمنی

• Ensure the power supply is disconnected from the main power source before any installation, wiring, or maintenance procedures.
• All wiring should be performed by qualified personnel in accordance with local electrical codes and regulations.
• دستگاه را در معرض رطوبت یا دمای شدید قرار ندهید.
• مهم: When connecting to an electric controlled lock, the unlocking time delay must be set to 0 seconds. Failure to do so may result in damage or burning of the electric bolt lock.
• صحت جلد را تأیید کنیدtage and current ratings of all connected devices to prevent overload.

3. محصول تمام شدview

The OBO HANDS K80 Power Supply is a compact and efficient unit designed for seamless integration into access control systems. It features a wide voltage input range and provides a stable DC 12V output.

3.1 ویژگی های کلیدی

• حجم ورودیtage: Standard AC 100V-240V, 50-60Hz, 36W.
• خروجی جلدtage: Stabilized DC 12V / 3A.
• کنترل خروجی: NC (Normally Closed) / NO (Normally Open) outputs for compatibility with various electric locks.
• تاخیر زمانی: Adjustable unlocking time delay from 0 to 15 seconds.
• حفاظت: Automatic protection function against short circuits, preventing voltage output in such events.
• طراحی: Small and exquisite iron shell for easy installation.

3.2 محتویات بسته

• 1 x OBO HANDS K80 Access Control Power Supply
• ۱ عدد دفترچه راهنمای کاربر (این سند)

3.3 محصول View

4. مشخصات

4.1 ابعاد

5. راه اندازی و نصب

Careful wiring is crucial for the correct and safe operation of the power supply and connected access control components.

5.1 نمودار سیم کشی

5.2 دستورالعمل های اتصال

1. ورودی AC: Connect the AC 100V-240V power source to the designated AC input terminals on the power supply.
2. DC Output (+12V, GND): These terminals provide the main 12V DC power for your access control system components. Connect +12V to the positive input of your access controller or lock, and GND to the negative/ground.
3. فشار دادن: This terminal is typically used for connecting an exit button. When the button is pressed, it triggers the unlock mechanism.
4. -COM, +NC, +NO: These are the relay output terminals for controlling electric locks.
   • NC (به طور معمول بسته): The circuit is closed (power supplied) when the lock is in its default state, and opens to unlock. Used for fail-safe locks (e.g., magnetic locks).
   • خیر (به طور معمول باز): The circuit is open (no power supplied) when the lock is in its default state, and closes to unlock. Used for fail-secure locks (e.g., electric bolt locks).
   • -COM (Common): The common terminal for the relay output.
5. Time Delay Adjustment: Use the 'Time' potentiometer on the unit to adjust the unlocking delay from 0 to 15 seconds. Remember to set this to 0 seconds for electric controlled locks to prevent damage.
6. قدرت اضافی: The diagram shows connections for 'Extra Power' for other controllers, indicating flexibility for complex setups.

6. دستورالعمل های عملیاتی

Once properly installed and wired, the OBO HANDS K80 Power Supply operates automatically to provide stable power to your access control system.

• روشن کردن: Connect the power supply to the AC mains. The 'POWER' indicator light on the unit will illuminate, indicating that the unit is receiving power and providing DC 12V output.
• کنترل قفل: The power supply will respond to signals from your access controller (e.g., keypad, RFID reader) or exit button to activate the connected electric lock via its NC/NO outputs.
• تاخیر زمانی: If configured, the adjustable time delay will control how long the lock remains in the unlocked state after activation.

7. تعمیر و نگهداری

The OBO HANDS K80 Power Supply is designed for reliable operation with minimal maintenance. However, periodic checks can help ensure its longevity and performance.

• تمیز کردن: دستگاه را تمیز و عاری از گرد و غبار و آلودگی نگه دارید. برای تمیز کردن از یک پارچه خشک و نرم استفاده کنید. از پاک کننده های مایع استفاده نکنید.
• بررسی اتصال: Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or system failure.
• شرایط محیطی: Ensure the unit is operating within its specified environmental conditions (temperature, humidity) to prevent premature wear.

8 عیب یابی

If you encounter issues with your OBO HANDS K80 Power Supply, refer to the following troubleshooting guide:

9. گارانتی و پشتیبانی

OBO HANDS products are designed for quality and reliability. For specific warranty information, please refer to the documentation provided at the time of purchase or contact your retailer.

9.1 پشتیبانی فنی

For technical assistance or inquiries, you may contact OBO HANDS support:

• واتس اپ: +86 177 2255 8183 (Available Monday-Sunday, 24/7)