1. مقدمه
This manual provides essential instructions for the proper installation, operation, and maintenance of your Audio System HLC-2 Plus 2-Channel High-Low Converter. Please read this manual thoroughly before using the device to ensure optimal performance and safety. Keep this manual for future reference.
2. دستورالعمل های ایمنی
- مطمئن شوید که تمام اتصالات محکم و عایقبندی مناسبی دارند تا از اتصال کوتاه جلوگیری شود.
- Disconnect the vehicle's battery before performing any wiring to avoid electrical shock or damage to the system.
- دستگاه را در معرض رطوبت یا دمای شدید قرار ندهید.
- اگر در مورد هر مرحلهای مطمئن نیستید، نصب باید توسط یک متخصص واجد شرایط انجام شود.
- Mount the converter in a location where it is protected from physical damage and excessive heat.
3. محتویات بسته
- Audio System HLC-2 Plus 2-Channel High-Low Converter
- Wiring Harness (if applicable, based on image)
- Remote Control Unit (if applicable, based on image)
- راهنمای کاربر (این سند)
4. محصول تمام شدview
شکل 1: Audio System HLC-2 Plus 2-Channel High-Low Converter. The image displays the main converter unit, a black rectangular box with a rotary knob for level adjustment (Min to Max) and a 'POWER' button. Two RJ-style cables with clear plastic connectors are shown connected to the unit, representing the wiring harness for signal input/output and remote turn-on.
The Audio System HLC-2 Plus is a 2-channel high-low converter designed to integrate aftermarket amplifiers with factory car stereos that lack RCA pre-outs. It converts high-level speaker signals into low-level RCA signals, providing a clean audio output for your amplifier. Key features include:
- Compatibility with all original OEM radios.
- 2-way high-low conversion with remote turn-on signal generation.
- Designed to prevent interference and turn-on noise.
- Excellent sound quality through PSA and 5-volt technology.
- Features a plug-in connection terminal for ease of installation.
- Fast and accurate music recognition.
5. راه اندازی و نصب
۴.۲ نمودار سیمکشی (کلیات)
A detailed wiring diagram is crucial for correct installation. While specific diagrams may vary, the general connections are as follows:
- ورودی سطح بالا: Connect the speaker outputs from your factory radio to the high-level inputs of the HLC-2 Plus. Ensure correct polarity (positive to positive, negative to negative) for each channel.
- خروجی سطح پایین: Connect the RCA outputs from the HLC-2 Plus to the RCA inputs of your aftermarket ampزنده تر
- روشن کردن از راه دور: The HLC-2 Plus generates a remote turn-on signal. Connect this output to the remote input of your amplifier. This will turn on your amplifier automatically when the factory radio is powered on.
- برق/اتصال به زمین: The unit typically draws power from the high-level input signal, eliminating the need for a separate power wire. Ensure a good ground connection if specified by the manufacturer.
5.2 مراحل نصب
- قطع کردن باتری: Always disconnect the negative terminal of your vehicle's battery before starting any electrical work.
- Access Speaker Wires: Locate and access the speaker output wires from your factory head unit or ampزنده تر
- Connect High-Level Inputs: Splice the factory speaker wires to the corresponding high-level input wires of the HLC-2 Plus. Use high-quality connectors or solder for secure connections.
- خروجیهای RCA را وصل کنید: Run RCA cables from the HLC-2 Plus to your aftermarket ampزنده تر
- Connect Remote Wire: Connect the remote output wire from the HLC-2 Plus to the remote turn-on input of your ampزنده تر
- مبدل را نصب کنید: Securely mount the HLC-2 Plus in a dry, accessible location, away from heat sources and moving parts.
- باتری را دوباره وصل کنید: Once all connections are verified, reconnect the vehicle's battery.
6. دستورالعمل های عملیاتی
6.1 روشن شدن اولیه
After installation, turn on your vehicle's ignition and then the factory radio. The HLC-2 Plus should automatically detect the audio signal and send a remote turn-on signal to your amplifier, powering it on.
6.2 Level Adjustment
The HLC-2 Plus features a rotary knob (Min-Max) for adjusting the output level. This allows you to match the output signal of the converter to the input sensitivity of your amplifier. Start with the knob at the minimum setting and gradually increase it while listening for distortion. Adjust until a clean, strong signal is achieved without clipping at the ampزنده تر
6.3 دکمه پاور
The 'POWER' button on the unit is typically an indicator or a manual override. Refer to specific product documentation if its function deviates from automatic operation.
7. تعمیر و نگهداری
- دستگاه را تمیز و عاری از گرد و غبار و آلودگی نگه دارید. برای تمیز کردن از یک پارچه نرم و خشک استفاده کنید.
- Ensure all wiring connections remain secure over time. Periodically check for loose connections.
- Avoid exposing the unit to direct sunlight or extreme heat, which can affect its lifespan.
- No user-serviceable parts are inside. Do not attempt to open or repair the unit yourself.
8 عیب یابی
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| صدایی از ampزنده تر | Incorrect wiring; No remote signal; Amplifier not powered; HLC-2 Plus not receiving signal. | Check all wiring connections (high-level input, RCA output, remote). Ensure factory radio is on and producing sound. Verify amplifier power and ground connections. |
| صدای مخدوش | Output level too high; Incorrect gain settings on ampزنده تر | Reduce the output level on the HLC-2 Plus. Adjust ampتنظیمات افزایش آبفکن |
| Ampلافایر روشن نمی شود | Remote wire not connected; HLC-2 Plus not detecting signal. | Verify remote wire connection from HLC-2 Plus to amplifier. Ensure factory radio is on and playing audio. |
| Engine noise/Whine | Ground loop issue; Poor wiring. | Ensure all components are properly grounded. Check for damaged or unshielded RCA cables. |
9. مشخصات
- مدل: HLC-2 Plus
- شماره قطعه: 020020112
- کانال ها: 2-کانال
- Max Speaker Output Power: 70 Watts (input handling)
- امپدانس: 4 Ohm (input impedance)
- روش کنترل: Remote Control (via generated turn-on signal)
- منبع تغذیه: Vehicle's 12V electrical system (typically signal-sensing)
- وزن: Approximately 997.9 g (2.2 pounds)
10. گارانتی و پشتیبانی
For warranty information and technical support, please refer to the documentation provided with your purchase or contact Audio System customer service. Keep your proof of purchase for warranty claims.
