VIZIO SB4051-C0 40-Inch 5.1 Sound Bar System User Manual

1. مقدمه

This manual provides instructions for the VIZIO SB4051-C0 40-Inch 5.1 Sound Bar System. This system is designed to deliver a 5.1 channel true surround sound experience, featuring a 40-inch sound bar, a wireless subwoofer, and two rear satellite speakers. It supports high-quality audio connections via HDMI and wireless streaming via Bluetooth with aptX technology. Please read this manual thoroughly before operating your device.

۲. چه چیزهایی در جعبه است؟

بررسی کنید که آیا همه اجزا در بسته‌بندی موجود هستند یا خیر:

• 40-inch Sound Bar
• ساب ووفر بی سیم
• Rear Satellite Speakers (2 units)
• کابل HDMI
• کنترل از راه دور (با ۲ باتری قلمی)
• سیم های برق
• دیوار کوه براکت

تصویر: تمام شدview of the VIZIO SB4051-C0 5.1 Sound Bar System components.

3. راه اندازی

1. تعیین موقعیت نوار صدا: Place the 40-inch sound bar centrally below your television. Ensure it is on a stable surface or securely mounted to the wall using the provided brackets.
2. Connecting the Sound Bar to TV: Connect the sound bar to your TV using the included HDMI cable for the best audio quality. Insert one end into the HDMI ARC port on your TV and the other into the HDMI OUT (ARC) port on the sound bar. Alternatively, use an Optical or Coaxial Digital Audio cable.
3. قرار دادن ساب ووفر بی‌سیم: Place the wireless subwoofer in a suitable location within the room, ideally near a corner for optimal bass response. Ensure it is within range of a power outlet.
4. اتصال بلندگوهای ماهواره‌ای: Connect the two rear satellite speakers to the wireless subwoofer using the provided speaker cables. The cables are typically long enough (approximately 25-30 feet) to allow flexible placement behind your listening area.
5. اتصال برق: Connect all components (sound bar, subwoofer) to power outlets using their respective power cords.
6. روشن کردن اولیه و جفت شدن: Power on the sound bar and subwoofer. The subwoofer and sound bar should automatically pair. If pairing issues occur, refer to the troubleshooting section.

تصویر: عقب view of the sound bar, illustrating connection ports.

4. دستورالعمل های عملیاتی

4.1 عملیات اساسی

• روشن/خاموش برق: Use the Power button on the remote control or the sound bar to turn the system on or off.
• کنترل صدا: Adjust the master volume using the Volume Up (+) and Volume Down (-) buttons on the remote.
• انتخاب ورودی: Cycle through available input sources (HDMI, Optical, Bluetooth, etc.) using the Input button on the remote.

4.2 جفت شدن بلوتوث

1. Press the Bluetooth button on the remote control or the sound bar. The sound bar's LED indicator will begin to pulse.
2. On your mobile device (smartphone, tablet, computer), enable Bluetooth and search for "VIZIO SB4051-C0".
3. Select the sound bar from the list of available devices to pair. Once connected, the LED indicator on the sound bar will stop pulsing and glow steadily.

4.3 تنظیمات صوتی

The remote control features an LCD display (note: no backlight) for navigating audio settings. Adjustments include:

• سطح بیس: Adjust the bass output to your preference.
• سطح ساب ووفر: Control the volume of the wireless subwoofer independently.
• حالت شب: Reduces dynamic range for quieter listening, often minimizing bass output.
• TruVolume: Maintains consistent volume levels across different content.

5. تعمیر و نگهداری

• تمیز کردن: Use a soft, dry cloth to clean the surfaces of the sound bar, subwoofer, and satellite speakers. Avoid using liquid cleaners or solvents.
• تهویه: برای جلوگیری از گرمای بیش از حد، از تهویه مناسب در اطراف تمام اجزا اطمینان حاصل کنید. هیچ یک از منافذ را مسدود نکنید.
• ذخیره سازی: اگر سیستم را برای مدت طولانی انبار می‌کنید، آن را از برق بکشید و در جای خشک و خنک نگهداری کنید.

6 عیب یابی

بدون صدا:

Ensure all power cords are securely connected and the system is powered on. Verify the correct input source is selected on the sound bar. Check the volume levels on both the sound bar and your TV. Confirm that the TV's audio output is set to external speakers or the correct digital output format (e.g., PCM).

Subwoofer or Satellite Speakers Not Working:

Ensure the wireless subwoofer is powered on and its LED indicator is solid. Check that the satellite speakers are correctly wired to the subwoofer. If the subwoofer is not paired, press and hold the pairing button on the back of the subwoofer for 5 seconds, then press and hold the power button on the sound bar for 5 seconds to re-establish the connection.

Hissing Sound During Bluetooth Streaming:

If you experience a hissing sound with TruVolume enabled during Bluetooth streaming, try disabling TruVolume on the sound bar and adjusting the volume directly from your connected device.

Remote Control LCD Display is Difficult to Read:

The remote control's LCD screen does not have a backlight. Use it in a well-lit environment for better visibility.

7. مشخصات

8. گارانتی و پشتیبانی

The VIZIO SB4051-C0 Sound Bar System typically comes with a 12-month limited warranty. For detailed warranty information, product support, or service inquiries, please refer to the official VIZIO website or contact VIZIO customer support directly. Keep your purchase receipt for warranty claims.