1. مقدمه
This manual provides comprehensive instructions for the SYLVANIA OCTRON T8 Fluorescent Lamp, Model 22401. It covers essential information regarding product overview, safety, installation, operation, maintenance, troubleshooting, and technical specifications. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. اطلاعات ایمنی
برای جلوگیری از آسیب یا خسارت، نکات ایمنی زیر را رعایت کنید:
- قطع برق: Always disconnect power to the fixture before installing, removing, or servicing the lamp.
- مدیریت صحیح: Handle fluorescent lamps carefully. Avoid dropping or striking them, as they contain glass and can break.
- محتوای جیوه: فلورسنت lamps contain a small amount of mercury. In case of breakage, ventilate the area and follow local guidelines for cleanup and disposal.
- دفع: l استفاده شده را دور بریزیدamps according to local environmental regulations. Do not dispose of with general household waste.
- سازگاری بالاست: اطمینان از lamp is compatible with the existing ballast. Incompatible ballasts can lead to flickering, reduced lamp life, or damage. This lamp is designed for use with rapid and instant start ballasts.
- فقط استفاده در فضای داخلی: This product is intended for indoor use in appropriate fixtures.
3. محصول تمام شدview
The SYLVANIA OCTRON T8 Fluorescent Lamp (Model 22401) is a 32-watt, G12 base lamp designed for general illumination. It provides 2450 lumens of light with a 3500K color temperature, offering a natural white light appearance. With a Color Rendering Index (CRI) of 90, it delivers excellent color accuracy, making it suitable for environments where color perception is critical. The lamp is energy-efficient and has an average rated life of up to 22,500 hours on instant start ballasts and up to 27,000 hours on programmed start ballasts.
Figure 3.1: Packaging for the SYLVANIA OCTRON T8 Fluorescent Lamp, highlighting its 'Natural White' color and 'Ecologic' features.
شکل 3.2: سمت view از Lamp packaging, detailing technical specifications such as 32W and 3500K.
4. راه اندازی و نصب
برای نصب ایمن و صحیح، مراحل زیر را دنبال کنید:
- خاموش کردن برق: Locate the circuit breaker or fuse box controlling the lighting fixture and turn off the power supply. Verify that the power is off before proceeding.
- حذف L قدیمیamp (در صورت وجود): Carefully twist the old fluorescent lamp 90 degrees and gently pull it out of the lampدارندگان
- بررسی فیکسچر: l را بررسی کنیدampholders for any damage or wear. Ensure they are clean and free from debris.
- درج جدید Lamp: Align the pins of the new SYLVANIA OCTRON T8 lamp with the slots in the lampholders. Gently push the lamp به lampholders until the pins are fully seated, then rotate the lamp 90 degrees until it locks into place.
- بررسی Secure Fit: اطمینان از lamp is securely seated and properly aligned in the fixture.
- بازیابی برق: منبع تغذیه را دوباره از طریق قطع کننده مدار یا جعبه فیوز روشن کنید.
- تست Lamp: برای تأیید l، کلید چراغ را روشن کنیدamp به درستی روشن می شود.
توجه: For optimal performance and warranty coverage, pair OCTRON T8 lamps with QUICKTRONIC electronic ballasts.
5. دستورالعمل های عملیاتی
The SYLVANIA OCTRON T8 Fluorescent Lamp operates by simply turning on the power switch connected to the lighting fixture. The lamp is designed for rapid and instant start systems, providing immediate illumination.
6. تعمیر و نگهداری
Minimal maintenance is required for the SYLVANIA OCTRON T8 Fluorescent Lamp:
- تمیز کردن: Periodically, with the power off, gently wipe the lamp با یک پارچه نرم، خشک و بدون پرز، گرد و غبار و آلودگیها را پاک کنید. از پاککنندههای مایع مستقیماً روی سطح استفاده نکنید.amp.
- جایگزینی: l را جایگزین کنیدamp when it reaches the end of its useful life (indicated by dimming, flickering, or failure to start). Follow the installation steps in Section 4 for replacement.
7 عیب یابی
If your SYLVANIA OCTRON T8 lamp is not functioning as expected, consider the following:
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| Lamp روشن نمی شود | No power to fixture, incorrect installation, faulty lamp, faulty ballast. | Check power supply. Re-seat lamp. Test with a known good lamp. Consult an electrician if ballast is suspected. |
| Lamp سوسو زدن | Loose connection, incompatible ballast, lamp nearing end of life, cold temperatures. | اطمینان حاصل کنید lamp is securely seated. Verify ballast compatibility. Replace lamp if old. Ensure operating environment is within recommended temperature range. |
| کاهش روشنایی | Dust accumulation, lamp نزدیک شدن به پایان زندگی. | ل پاکamp surface. Replace lamp if old. |
| Ends of lamp glow but do not fully light | Faulty ballast, lamp نزدیک شدن به پایان زندگی. | Consult an electrician for ballast inspection. Replace lamp. |
اگر مراحل عیبیابی مشکل را حل نکرد، با پشتیبانی مشتری یا یک برقکار واجد شرایط تماس بگیرید.
8. مشخصات
| ویژگی | مشخصات |
|---|---|
| نام تجاری | لد ونس (سیلوانیا) |
| شماره مدل | 22401 |
| نوع نور | فلورسنت |
| اندازه شکل لامپ | T8 |
| پایه لامپ | G12 |
| واتtage | 32 وات |
| جلدtage | 120 ولت |
| روشنایی | 2450 لومن |
| دمای رنگ | 3500 Kelvin (Natural White) |
| شاخص رندر رنگ (CRI) | 90 |
| عمر متوسط | Up to 22,500 hours (Instant Start), up to 27,000 hours (Programmed Start) |
| ابعاد محصول | 48 x 1.1 x 1.1 اینچ |
| مواد | شیشه ای |
| ویژگی خاص | انرژی کارآمد |
| UPC | 046135224010 |
9. گارانتی و پشتیبانی
For warranty information and customer support, please refer to the official SYLVANIA website or contact LEDVANCE customer service.
توضیحات گارانتی: www.sylvania.com
For further assistance, please visit the LEDVANCE store or contact their support channels.
