YSI 251401Y

راهنمای کاربر پودر معرف کلر آزاد YSI 251401Y DPD

For pHotoFlex and 900 Chlorine Colorimeter

1. محصول تمام شدview

The YSI 251401Y DPD Free Chlorine Reagent Powder is an EPA-approved chemical reagent designed for accurate measurement of free chlorine concentrations. This product is specifically formulated for use with YSI pHotoFlex and 900 Chlorine Colorimeter instruments, providing reliable results within a range of 0.02 to 2 mg/L. Each pack contains 100 individual 10ml volume powder packets, ensuring convenience and consistent dosing for laboratory and field applications.

YSI 251401Y DPD Free Chlorine Reagent Powder Packet

Image 1.1: A single packet of YSI 251401Y DPD Free Chlorine Reagent Powder. The label indicates "Powder Packets," "Part Number: 251401Y," "Lot Code: L 01 A," and "Exp: 01.2017." It also includes safety warnings and manufacturer contact information.

2. Safety Information and Handling

This product is intended for professional laboratory and field use only. Adherence to all safety guidelines is critical for proper and safe operation.

3. راه اندازی و آماده سازی

Before beginning any measurement, ensure you have the necessary equipment and that your colorimeter is calibrated according to its specific user manual.

۴.۱ مواد مورد نیاز (شامل نمی‌شود)

3.2 آماده سازی معرف

The YSI 251401Y DPD Free Chlorine Reagent is provided in pre-measured powder packets, eliminating the need for manual weighing or dilution. Each packet contains the precise amount of reagent for a 10ml sample حجم

4. Operating Instructions for Free Chlorine Measurement

Follow these steps for accurate free chlorine measurement using the YSI 251401Y DPD Free Chlorine Reagent Powder with a compatible YSI colorimeter.

  1. S را آماده کنیدampسلول لو: Rinse a clean sample cell thoroughly with deionized water, then with a small amount of the sample آزمایش شود
  2. پر Sampسلول لو: s را پر کنیدample cell with 10 ml of the water sample to be analyzed. Ensure the sample volume is precise.
  3. اضافه کردن معرف: Carefully open one YSI 251401Y DPD Free Chlorine Reagent Powder packet. Add the entire contents of the powder packet to the 10 ml sampدر سلول
  4. مخلوط کردن: درپوش sample cell and invert it gently several times to dissolve the powder completely. Avoid shaking vigorously, which can introduce air bubbles. A pink color will develop if free chlorine is present.
  5. زمان واکنش: Allow a reaction time of approximately 1 minute for the color to fully develop. Consult your colorimeter's manual for specific reaction time recommendations.
  6. اندازه گیری: Insert the prepared sample cell into the YSI pHotoFlex or 900 Chlorine Colorimeter. Follow the instrument's instructions to initiate the measurement. The colorimeter will display the free chlorine concentration in mg/L.
  7. نتایج رکوردها: Record the measurement results immediately.
  8. پاکسازی: After measurement, empty the sample cell and rinse it thoroughly with deionized water.

توجه: For best results, perform measurements promptly after sample collection. The DPD method is sensitive to light and temperature; protect samples and reagents from direct sunlight and extreme temperatures.

5. نگهداری و ذخیره سازی

Proper storage of the reagent packets is essential to maintain their integrity and ensure accurate results.

6 عیب یابی

This section addresses common issues that may arise during the use of the DPD Free Chlorine Reagent.

مشکلعلت احتمالیراه حل
No color development or faint color when chlorine is expected.
  • Expired reagent.
  • Insufficient mixing.
  • Sample pH outside optimal range.
  • Interfering substances in sampله
  • Check expiration date; use fresh reagent.
  • Ensure complete dissolution of powder.
  • تأیید کنیدample pH is within the colorimeter's specified range for DPD method.
  • Consult colorimeter manual for known interferences.
Inconsistent or erratic readings.
  • اس نامناسبample حجم
  • اس های آلودهampسلولهای
  • حباب‌های هوا درampسلول لو
  • Colorimeter calibration issue.
  • Ensure precise 10 ml sample حجم
  • Thoroughly clean sample cells before each use.
  • Gently invert to mix, avoid vigorous shaking.
  • Perform colorimeter calibration as per instrument manual.

7. مشخصات

8. گارانتی و پشتیبانی

For technical support, product inquiries, or to request a Safety Data Sheet (SDS), please contact YSI directly using the information below.

YSI stands behind the quality of its products. Please refer to the official YSI website or contact customer support for detailed warranty information applicable to this reagent.

اسناد مرتبط - 251401Y

قبلview دفترچه راهنمای دستگاه اندازه‌گیری رسانایی YSI مدل 32
دفترچه راهنمای دستگاه هدایت‌سنج YSI مدل 32، که جزئیات توضیحات کلی، مشخصات، رویه‌های عملیاتی، نگهداری و کالیبراسیون آن را شرح می‌دهد.
قبلview راهنمای شروع سریع YSI Pro20/Pro20i: کالیبراسیون و عملکرد
راهنمای مختصر برای کالیبراسیون و بهره‌برداری از دستگاه‌های اکسیژن‌سنج محلول YSI Pro20/Pro20i، شامل نصب غشاء، تنظیم سنسور، کالیبراسیون فشارسنج و DO، جبران شوری و اندازه‌گیری. شامل مراحل عملیاتی ضروری و اطلاعات تماس.
قبلview برگه اطلاعات ایمنی محلول بافر YSI 3821 با pH 4.00 (SDS)
برگه اطلاعات ایمنی جامع (SDS) برای محلول بافر YSI 3821 با pH 4.00، که جزئیات شناسایی محصول، خطرات، ترکیب، کمک‌های اولیه، نحوه‌ی جابجایی، نگهداری و اطلاعات نظارتی را شرح می‌دهد.
قبلview راهنمای کاربری دستگاه‌های اندازه‌گیری اکسیژن محلول و دما YSI EcoSense DO200A/DO200M
این دفترچه راهنما دستورالعمل‌های جامعی برای کار، نصب، نگهداری و عیب‌یابی دستگاه‌های اکسیژن محلول و دما YSI EcoSense DO200A و DO200M ارائه می‌دهد. این دفترچه شامل جزئیات مشخصات، لوازم جانبی و اطلاعات گارانتی است.
قبلview دفترچه راهنمای عملیات و نگهداری فرستنده ماهواره‌ای YSIT-1
Comprehensive user manual for the YSI Model YSIT-1 Satellite Transmitter, covering its operation, maintenance, hardware setup, and serial command reference. Details include time management, data storage, GOES data formatting, RF transmitter control, and GPS synchronization.
قبلview دفترچه راهنمای عملیاتی MIQ/CHV PLUS Sensor IQ Net Sensor YSI
این دفترچه راهنما دستورالعمل‌های دقیقی برای ماژول شیر YSI IQ Sensor Net MIQ/CHV PLUS ارائه می‌دهد که شامل نصب، تنظیمات، نگهداری و دستورالعمل‌های ایمنی برای سرهای تمیزکننده حسگر با هوای فشرده می‌شود.