Greenworks 20192 8.5-Inch 6.5 Amp Electric Corded Pole Saw Instruction Manual

1. مقدمه

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Greenworks 20192 8.5-Inch 6.5 Amp Electric Corded Pole Saw. Please read all instructions carefully before use to ensure proper handling and to prevent injury or damage to the tool.

2. اطلاعات ایمنی مهم

هنگام استفاده از ابزارهای برقی، همیشه اقدامات احتیاطی اولیه ایمنی را رعایت کنید تا خطر آتش‌سوزی، برق‌گرفتگی و آسیب‌های شخصی کاهش یابد. این دفترچه راهنما را برای مراجعات بعدی نگه دارید.

دستورالعمل های ایمنی عمومی:

• از تجهیزات حفاظت فردی (PPE) مناسب، از جمله عینک ایمنی، دستکش و محافظ گوش استفاده کنید.
• مطمئن شوید که محل کار از افراد متفرقه، به ویژه کودکان و حیوانات خانگی، خالی است.
• اره میله‌ای را در شرایط مرطوب یا در مجاورت مایعات یا گازهای قابل اشتعال کار نکنید.
• Keep a firm grip on the tool with both hands during operation.
• Always disconnect the power supply before performing any maintenance, cleaning, or when the tool is not in use.
• Inspect the tool for damage before each use. Do not use if any parts are damaged.

3. محصول تمام شدview و اجزاء

The Greenworks 20192 Electric Corded Pole Saw is designed for trimming limbs in hard-to-reach areas. It features an 8-inch Oregon bar and chain, an automatic oiler, and a 3-piece aluminum shaft for extended reach.

شکل 3.1: تمام شده استview of the Greenworks 20192 Electric Corded Pole Saw, highlighting its split shaft design, automatic chain oiler, 8-inch bar and chain, foam hand hold, and instant electric start.

Figure 3.2: The pole saw features a split shaft design, allowing for easy assembly and disassembly for storage or transport.

Figure 3.3: The cutting head is equipped with an 8-inch Oregon bar and chain, suitable for various limb trimming tasks.

4. راه اندازی و مونتاژ

The pole saw comes with a 3-piece aluminum shaft that can be extended up to 8 feet. Follow these steps for assembly:

1. Connect the motor head to the first shaft section, ensuring it clicks securely into place.
2. Attach the middle extension shaft (if desired for extended reach) to the first shaft section, aligning the connectors and securing them.
3. Connect the handle section to the assembled shaft, ensuring all connections are firm.
4. Verify that the chain is properly seated on the bar and has appropriate tension.

5. دستورالعمل های عملیاتی

Starting the Pole Saw:

• Ensure the pole saw is connected to a suitable power outlet.
• Engage any safety switches or triggers as per the tool's design.
• 6.5 Amp Electric Motor provides instant electric start.

تکنیک های برش:

• Maintain a balanced stance and firm grip on the pole saw.
• Allow the saw to do the work; do not force it through branches.
• For larger limbs, make an undercut first to prevent bark stripping, then complete the cut from the top.

Figure 5.1: The pole saw in operation, demonstrating its extended reach for trimming high branches.

6. تعمیر و نگهداری

روغن کشی اتوماتیک:

• The pole saw is equipped with an automatic oiler that applies oil to the bar and chain.
• Regularly check the translucent oil tank to ensure sufficient bar oil levels.
• Refill with appropriate bar and chain oil as needed to ensure durability and extend the life of the chain.

Figure 6.1: The automatic oiler system ensures continuous lubrication of the bar and chain during operation.

کشش زنجیر:

• The pole saw features an easy-adjust chain tensioning system for quick tightening of the chain.
• Refer to page 23 of the user manual for detailed chain tensioning instructions to prevent chain slipping and ensure safe operation.
• Proper chain tension is crucial for efficient cutting and to prevent premature wear of the chain and bar.

Figure 6.2: The tool-less chain tensioning system allows for quick and easy adjustments to maintain optimal chain tension.

نظافت و نگهداری:

• After each use, clean the bar and chain to remove sawdust and debris.
• اره میله‌ای را در مکانی خشک، امن و دور از دسترس کودکان نگهداری کنید.

7 عیب یابی

If you encounter issues with your pole saw, refer to the following common problems and solutions:

• اره روشن نمی‌شود: Check power connection, ensure safety switches are engaged, and verify the power outlet is functional.
• Chain not cutting effectively: Inspect chain tension (refer to page 23 of the user manual), check for dull or damaged chain teeth, and ensure the oil tank is filled.
• Chain coming off the bar: This is often due to improper chain tension. Adjust the tension as described in the maintenance section and the user manual.
• ارتعاش بیش از حد: Check for loose components, damaged chain, or improper chain tension.

For persistent issues or problems not listed here, please contact Greenworks customer support.

8. مشخصات

9. گارانتی و پشتیبانی

The Greenworks 20192 8.5-Inch 6.5 Amp Electric Corded Pole Saw comes with a 3 سال گارانتی محدود. For warranty claims, technical support, or replacement parts, please contact Greenworks customer service through their official webسایت یا خرده فروشی که محصول از آنجا خریداری شده است.