Eiko 43A/CL/H-120V

Eiko Halogen A19 43W Clear 120V Bulb User Manual

Model: 43A/CL/H-120V

1. اطلاعات ایمنی مهم

Please read all instructions carefully before installing or using this Eiko Halogen A19 bulb. Failure to follow these instructions may result in electric shock, fire, or other hazards.

2. راه اندازی و نصب

Follow these steps to safely install your Eiko Halogen A19 bulb:

  1. خاموش کردن برق: Locate the light fixture's power switch and turn it to the "OFF" position. For added safety, turn off the power at the main circuit breaker or fuse box.
  2. اجازه خنک شدن: اگر لامپ موجود را تعویض می‌کنید، قبل از لمس آن مطمئن شوید که کاملاً خنک شده است.
  3. حذف لامپ قدیمی: لامپ قدیمی را با احتیاط و در خلاف جهت عقربه‌های ساعت از سوکت جدا کنید.
  4. بررسی فیکسچر: پریز چراغ را از نظر هرگونه آسیب یا آلودگی بررسی کنید. مطمئن شوید که تمیز و خشک است.
  5. نصب حباب جدید: Gently screw the Eiko Halogen A19 bulb clockwise into the socket until it is snug. Do not overtighten.
  6. بازیابی برق: Turn the power back on at the circuit breaker or fuse box, then turn on the light switch.
Eiko Halogen A19 43W Clear 120V Bulb

Image 1: Eiko Halogen A19 43W Clear 120V Bulb. This image shows the clear glass bulb with a standard screw-in base, typical of an A19 shape.

3. دستورالعمل های عملیاتی

The Eiko Halogen A19 bulb operates like a standard incandescent bulb. Once installed, simply use the light fixture's switch to turn the bulb on or off.

4. تعمیر و نگهداری

Minimal maintenance is required for your Eiko Halogen A19 bulb. However, following these guidelines can help ensure optimal performance and longevity:

5 عیب یابی

If your Eiko Halogen A19 bulb is not functioning as expected, refer to the following common issues and solutions:

مشکلعلت احتمالیراه حل
لامپ روشن نمی شود
  • هیچ قدرتی به وسایل ندارد
  • لامپ به درستی پیچ نشده است.
  • لامپ معیوب است یا عمر مفید آن به پایان رسیده است.
  • Fixture switch is off.
  • کلید/فیوز مدار را بررسی کنید.
  • Ensure bulb is securely screwed into the socket (power off first).
  • لامپ را با یک لامپ جدید تعویض کنید.
  • Turn on the fixture switch.
لامپ سوسو می زند.
  • Loose connection in the socket.
  • سوئیچ دیمر ناسازگار.
  • جلدtage نوسانات
  • Turn off power, then tighten the bulb.
  • Ensure dimmer is compatible with halogen bulbs.
  • در صورت وجود ولتاژ، با یک برقکار مشورت کنیدtagمشکلات همچنان پابرجاست.
لامپ به سرعت می سوزد.
  • بیش از حد واتtage برای فیکسچر
  • Frequent power surges.
  • لرزش بیش از حد.
  • لمس شیشه با دست خالی هنگام نصب
  • Verify fixture's maximum wattage.
  • Consider a surge protector for the circuit.
  • از پایداری دستگاه اطمینان حاصل کنید.
  • Handle new bulbs with a cloth or gloves.

6. مشخصات محصول

Detailed specifications for the Eiko Halogen A19 43W Clear 120V bulb:

7. گارانتی و پشتیبانی

7.1. گارانتی محدود

Eiko products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship under normal use. The specific duration and terms of the warranty may vary. Please retain your proof of purchase for warranty claims.

7.2. پشتیبانی مشتری

For technical assistance, warranty inquiries, or further information regarding your Eiko Halogen A19 bulb, please contact Eiko customer support. Refer to the official Eiko webبرای دریافت جدیدترین اطلاعات تماس، به بسته‌بندی سایت یا محصول مراجعه کنید.

اسناد مرتبط - 43A/CL/H-120V

قبلview EIKO LHS1 Series LED Linear High Bay Installation Instructions
Comprehensive installation guide for the EIKO LHS1 Series LED Linear High Bay fixtures, covering overview, safety precautions, mounting options, wiring diagrams, and controls.
قبلview EIKO LED T8 Linear Tube Installation Instructions
Comprehensive installation instructions for EIKO LED T8 Type B Linear Tube lights, covering safety precautions, maintenance, and detailed wiring diagrams for retrofitting fluorescent luminaires.
قبلview EIKO VL1 Series LED Volumetric Troffer Installation Instructions
Comprehensive installation guide for the EIKO VL1 Series LED Volumetric Troffer, covering overview, safety precautions, installation steps, wiring schematics, and sensor installation. Includes power and CCT selection.
قبلview راهنمای نصب سنسور تنظیم نور دو سطحی مایکروویو EIKO Z10 به همراه فتوسل
راهنمای جامع نصب سنسور تنظیم نور دوسطحی مایکروویو EIKO Z10 با فتوسل، شامل مشخصات دقیق، پوشش سنسور و اطلاعات مربوط به انطباق با FCC برای راه‌اندازی و عملکرد صحیح.
قبلview EIKO CSX1 Series LED Commercial Strip Premium Installation Instructions
Comprehensive installation guide for the EIKO CSX1 Series LED Commercial Strip Premium fixtures, covering surface mount, chain mount, and optional accessory installations.
قبلview دستورالعمل نصب سایبان LED مربعی EIKO
این سند دستورالعمل‌های نصب دقیقی برای چراغ سقفی مربعی EIKO LED Surface Canopy Square ارائه می‌دهد که شامل موارد ایمنی، نصب روی سطح، سیم‌کشی جانبی، نصب آویز، تنظیم توان و نصب سنسور Z10 می‌شود.