Panasonic KX-TSC62SXB Corded Telephone User Manual

1. مقدمه

This manual provides essential instructions for the setup, operation, and maintenance of your Panasonic KX-TSC62SXB Corded Telephone. This model features caller ID, a speakerphone, and an alphanumeric display, designed for reliable communication.

Please read this manual thoroughly before using your new telephone to ensure proper functionality and to familiarize yourself with all features.

2. محتویات بسته

قبل از ادامه تنظیمات، لطفاً بررسی کنید که همه موارد در بسته موجود باشند:

• 1N Telephone Set (Handset and Base Unit)
• 1N Line Cord
• 1N Operating Instructions (this manual)
• 1 Lithium Polymer Battery (included, for display functions)

3. راه اندازی

Follow these steps to set up your Panasonic KX-TSC62SXB telephone:

1. گوشی را وصل کنید: Plug the coiled cord from the handset into the designated jack on the base unit.
2. سیم خط را وصل کنید: Plug one end of the telephone line cord into the LINE jack on the base unit and the other end into your wall telephone jack.
3. Battery Installation (for display functions): The telephone includes a Lithium Polymer battery. Install it in the designated battery compartment, typically located on the underside of the base unit, following the polarity indicators. This battery powers the display for features like Caller ID and time/date display.
4. روشن شدن اولیه: The telephone should power on automatically once connected to the phone line.
5. تنظیم تاریخ و زمان: For Caller ID functionality and accurate call logs, it is crucial to set the correct date and time. Refer to the 'Operating Instructions' section for detailed steps on how to access and adjust these settings using the menu buttons.
6. نصب دیواری (اختیاری): The telephone is wall-mountable. Use the provided wall mounting adapter (if included) and follow the instructions to secure the unit to a wall. Ensure the long cord allows for comfortable use.

Figure 1: Product dimensions and weight for installation planning.

4. دستورالعمل های عملیاتی

4.1 برقراری و دریافت تماس

• برای برقراری تماس: گوشی را بلند کرده یا فشار دهید تلفن SP button. Dial the desired number using the alphanumeric keypad.
• برای دریافت تماس: وقتی تلفن زنگ می‌خورد، گوشی را بردارید یا دکمه تلفن SP دکمه
• برای پایان دادن به تماس: گوشی را دوباره روی پایه قرار دهید یا دکمه را فشار دهید تلفن SP اگر از بلندگو استفاده می‌کنید، دوباره دکمه را فشار دهید.

۳.۵ عملکرد بلندگو

برای استفاده از بلندگوی تلفن، دکمه تلفن SP button during a call. Press it again to switch back to the handset or to end the call.

4.3 Caller ID and Call Log

The telephone stores up to 30 incoming call records. When a call is received, the caller's number (and name, if available) will be displayed.

• Viewing Call Logs: را فشار دهید هویت تماس گیرنده button (up/down arrows) to scroll through the stored call records.
• Redial from Call Log: Select a number from the call log and press the اصلاح کننده button to dial it.
• Clearing Call Logs: Consult the detailed menu instructions in the full user guide for options to clear individual or all call log entries.

Figure 2: Alphanumeric display showing caller information.

Figure 3: Key features: 30 Call Logs (Caller ID) and 5 Redial Memory.

۳.۶ عملکرد شماره گیری مجدد

The telephone stores the last 5 dialed numbers. Press the اصلاح کننده را فشار دهید تا view and redial these numbers.

4.5 عملکرد بی صدا

در طول تماس ، دکمه را فشار دهید خاموش button to temporarily silence your microphone. The other party will not hear you. Press خاموش دوباره برای از سرگیری صحبت.

4.6 Tone/Pulse Settings

The telephone supports switchable tone and pulse dialing settings. This setting is usually configured during initial setup or can be changed via the menu if required by your telephone line service. Refer to the full user guide for instructions on adjusting this setting.

5. تعمیر و نگهداری

• تمیز کردن: Wipe the telephone with a soft, dry cloth. Do not use liquid or aerosol cleaners.
• قرار دادن: Avoid placing the telephone in direct sunlight, near heat sources, or in areas with high humidity.
• مراقبت از بند ناف: Ensure the telephone line cord and handset cord are not tangled or pinched, which can cause damage or signal issues.

6 عیب یابی

If you experience issues with your telephone, try the following solutions:

• بدون صدای شماره گیری:
  • مطمئن شوید که سیم تلفن به طور محکم به تلفن و پریز برق وصل شده است.
  • Test with another phone or line if available to determine if the issue is with the phone or the line.
• شناسه تماس گیرنده نمایش داده نمی شود:
  • Verify that the date and time are correctly set on the telephone.
  • تأیید کنید که سرویس شناسه تماس‌گیرنده را از طریق ارائه‌دهنده خدمات تلفن خود فعال کرده‌اید.
  • Ensure the battery for the display is correctly installed and functional.
• Display Blinking:
  • This often indicates that the date and time settings need to be configured. Follow the instructions in Section 3. Setup, step 5.
• کیفیت صدای ضعیف:
  • تمام اتصالات کابل را بررسی کنید.
  • Ensure the handset is clean and free from obstructions.
  • If using speakerphone, ensure you are within a reasonable distance from the microphone.

7. مشخصات

8. اطلاعات گارانتی

Your Panasonic KX-TSC62SXB Corded Telephone comes with a 1 سال گارانتی سازنده از تاریخ خرید. لطفاً رسید خرید خود را به عنوان مدرک خرید برای درخواست‌های گارانتی نگه دارید.

For warranty service or inquiries, please contact Panasonic customer support.

9. پشتیبانی

For further assistance, technical support, or service, please contact Panasonic India Pvt. Ltd. at the following details:

• آدرس: 12th Floor, Ambience Tower, Ambience Island, NH-8, Gurgaon, Haryana-122002 India
• تلفن: +91-124-4751300
• Webسایت: www.panasonic.com/in/ (Please check for the most current contact information)