Eiko H1155 H11 Series Halogen Replacement Bulb Instruction Manual

مقدمه

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Eiko H1155 H11 Series Halogen Replacement Bulb. Please read this manual thoroughly before installation and retain it for future reference.

اطلاعات ایمنی

• هشدار: Always ensure the vehicle's ignition is off and the battery is disconnected before attempting any electrical work.
• احتیاط: لامپ‌های هالوژن در دماهای بالا کار می‌کنند. قبل از دست زدن به لامپ، اجازه دهید کاملاً خنک شود.
• احتیاط: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use clean gloves or a clean cloth.
• هشدار: لامپ‌های قدیمی را طبق مقررات محلی، مسئولانه دور بیندازید.

محصول تمام شده استview

The Eiko H1155 is a high-performance H11 series halogen replacement bulb designed to meet or exceed original equipment specifications. It features a tungsten filament for bright, white light output.

شکل 1: Eiko H1155 H11 Series Halogen Replacement Bulb. This image shows the clear glass bulb with its internal tungsten filament, mounted on a metal base with a red rubber seal and a black plastic connector.

راه اندازی و نصب

1. آماده سازی: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical shorts.
2. دسترسی به لامپ: Locate the headlight assembly. Depending on your vehicle model, you may need to remove a cover, fender liner, or other components to access the rear of the headlight housing. Consult your vehicle's owner's manual for specific access instructions.
3. قطع سیم کشی: کانکتور برق را با دقت از پشت لامپ قدیمی جدا کنید.
4. حذف لامپ قدیمی: Unclip or twist the retaining mechanism that holds the old bulb in place. Gently pull the old bulb straight out from the housing.
5. نصب حباب جدید: Wearing clean gloves or using a clean cloth, carefully insert the new Eiko H1155 bulb into the headlight housing. Ensure it is seated correctly and the retaining mechanism is secured. لامپ شیشه‌ای را با دست خالی لمس نکنید.
6. سیم‌کشی را دوباره وصل کنید: رابط برق را دوباره به لامپ جدید وصل کنید.
7. عملکرد تست: Reconnect the vehicle's battery. Turn on the headlights to verify the new bulb is functioning correctly.
8. مونتاژ مجدد: Reinstall any covers or components that were removed to access the bulb.

توجه: It is recommended to replace both headlamps simultaneously for consistent light output and performance, as bulbs dim over time.

عملیات

The Eiko H1155 Halogen Replacement Bulb operates as part of your vehicle's existing electrical system. Once properly installed, it will illuminate when the vehicle's headlight switch is activated. No special operational procedures are required beyond standard vehicle headlight usage.

تعمیر و نگهداری

• تمیز کردن: If the headlight lens becomes dirty, clean it with a soft cloth and appropriate automotive cleaning solution. Avoid abrasive cleaners.
• بازرسی: Periodically check your headlights for proper function. If a bulb appears dim or has failed, replace it promptly.
• رسیدگی: When replacing bulbs, always handle them by the base to avoid contaminating the glass.

عیب یابی

مشخصات

گارانتی و پشتیبانی

For warranty information or technical support regarding your Eiko H1155 Halogen Replacement Bulb, please refer to the manufacturer's official website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: EIkO Auto Lighting