Beurer PM16 Female Heart Rate Monitor User Manual

مقدمه

Thank you for choosing the Beurer PM16 Female Heart Rate Monitor. This device is designed for ECG-accurate heart rate monitoring directly on the finger, making it ideal for activities such as walking or hiking where continuous pulse measurement is not always required. Please read this manual carefully to ensure safe and correct operation of your device.

راه اندازی

1. نصب باتری

The Beurer PM16 typically uses a standard button cell battery. To install or replace the battery:

1. پوشش محفظه باتری را در پشت دستگاه پیدا کنید.
2. Use a small coin or screwdriver to carefully open the battery compartment.
3. Insert the new battery with the positive (+) side facing upwards.
4. درپوش محفظه باتری را محکم ببندید.

2 تنظیمات اولیه

Upon first use or after battery replacement, you may need to set the time and date. Refer to the on-screen prompts or the device's buttons to navigate through the settings menu. Typically, buttons are used to adjust values and confirm selections.

تصویر: The Beurer PM16 Heart Rate Monitor. This image displays the compact design of the monitor, featuring a digital display and the integrated finger sensor for heart rate measurement. The device is shown from a slight angle, highlighting its ergonomic shape.

راه اندازی دستگاه

۴.۱ اندازه‌گیری ضربان قلب

The Beurer PM16 uses an ECG-accurate finger sensor for heart rate measurement.

1. اطمینان حاصل کنید که انگشت شما تمیز و خشک است.
2. Place your index finger firmly on the designated sensor area.
3. در حین اندازه گیری ثابت بمانید و از صحبت کردن خودداری کنید.
4. Your heart rate will be displayed on the screen after a few seconds.

توجه: For best results, ensure good contact between your finger and the sensor. Cold fingers or excessive movement can affect accuracy.

2. عملکرد کرنومتر

The device includes a stopwatch function for timing your activities.

1. Navigate to the stopwatch mode using the device's buttons.
2. Press the start button to begin timing.
3. Press the stop button to pause or end the timing.
4. Press the reset button to clear the stopwatch.

3. Time of Day Display

The Beurer PM16 also functions as a watch, displaying the current time of day. This is typically the default display mode when not actively measuring heart rate or using other functions.

تعمیر و نگهداری

1. تمیز کردن

To ensure the longevity and hygiene of your device:

• Wipe the device regularly with a soft, slightly damp پارچه
• از مواد پاک کننده یا حلال های ساینده استفاده نکنید.
• Ensure the finger sensor area is kept clean for accurate readings.

2. ذخیره سازی

When not in use, store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If the device will not be used for an extended period, it is recommended to remove the battery to prevent leakage.

عیب یابی

• No display / Device not turning on: Check if the battery is correctly inserted and has sufficient charge. Replace the battery if necessary.
• اندازه‌گیری نادرست ضربان قلب: Ensure your finger is clean, dry, and making firm contact with the sensor. Avoid movement during measurement. Cold fingers can affect readings; warm your hands before use.
• Display shows error message: Refer to the specific error code in the full product manual (if available) or try resetting the device by removing and reinserting the battery.

مشخصات

گارانتی

Beurer products are manufactured to the highest quality standards. For detailed information regarding the warranty period and conditions for your Beurer PM16 Heart Rate Monitor, please refer to the warranty card included with your purchase or visit the official Beurer webسایت. مدرک خرید خود را برای هرگونه ادعای گارانتی نگه دارید.

پشتیبانی مشتری

Should you have any questions, encounter issues not covered in this manual, or require technical assistance, please contact Beurer customer support. Contact details can typically be found on the official Beurer webدر محل یا روی بسته‌بندی محصول.

ویدیوهای رسمی محصول

هیچ ویدیوی رسمی از محصول از فروشنده برای جاسازی در این دفترچه راهنما در دسترس نبود.