1. مقدمه
Thank you for choosing the Skil 1061AA Corded Electric Jigsaw. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your tool. Please read these instructions carefully before use and keep them for future reference. Proper use and care will ensure long-lasting performance and safety.
هشدارهای ایمنی عمومی
- همیشه از تجهیزات حفاظت فردی مناسب، از جمله عینک ایمنی، محافظ شنوایی و دستکش استفاده کنید.
- مطمئن شوید که محل کار شما تمیز، روشن و عاری از هرگونه مانع است.
- هنگام کار با ابزار، کودکان و اطرافیان را دور نگه دارید.
- ابزارهای برقی را در اتمسفرهای انفجاری مانند در حضور مایعات، گازها یا گرد و غبار قابل اشتعال کار نکنید.
- قبل از انجام هرگونه تنظیمات، تعویض لوازم جانبی یا انبار کردن ابزار، همیشه آن را از منبع تغذیه جدا کنید.
- از تیغه مناسب برای مواد در حال برش استفاده کنید.
2. محصول تمام شدview
The Skil 1061AA is an 800W corded electric jigsaw designed for various cutting tasks in wood, aluminum, and steel. It features variable speed control and multiple material selection settings for optimized performance.
شکل 1: Skil 1061AA Corded Electric Jigsaw. This image displays the main components of the jigsaw, including the ergonomic handle, the blade housing, and the sturdy base plate, ready for operation.
ویژگی های کلیدی:
- قدرت: 800 Watts for robust cutting performance.
- سرعت: Variable speed from 800 to 3000 strokes per minute (spm).
- انتخاب مواد: 5 orbital settings for different materials and cutting requirements.
- ظرفیت برش: Up to 100 mm in wood, 10 mm in aluminum, and 4 mm in steel.
- وزن: Approximately 2.5 kg for comfortable handling.
- لوازم جانبی: Includes a carrying case and 6 blades for immediate use.
3. راه اندازی
3.1 نصب تیغه
- قطع برق: Ensure the jigsaw is unplugged from the power outlet before installing or changing blades.
- تیغه باز Clamp: تیغه cl را پیدا کنیدamp mechanism, typically a lever or screw, and open it according to the tool's design.
- تیغه را وارد کنید: ساقه تیغه اره منبت کاری اره مویی را در محفظه تیغه قرار دهیدamp, ensuring the teeth face forward. Push the blade in as far as it will go.
- تیغه ایمن: Close and tighten the blade clamp securely. Gently pull on the blade to confirm it is firmly seated and will not come loose during operation.
3.2 اتصال برق
سیم برق اره منبت کاری اره مویی را به یک پریز برق مناسب وصل کنید. از ولتاژ مطمئن شویدtage and frequency of the power supply match the specifications listed on the tool's rating plate.
4. دستورالعمل های عملیاتی
4.1 شروع و توقف
- برای شروع: Press the ON/OFF switch. For continuous operation, engage the lock-on button (if available).
- برای متوقف کردن: Release the ON/OFF switch. If the lock-on button is engaged, press the ON/OFF switch again to release it.
4.2 کنترل سرعت
The Skil 1061AA features variable speed control (800-3000 spm). Adjust the speed according to the material and desired cut quality. Lower speeds are generally suitable for harder materials like metal or for intricate cuts, while higher speeds are for softer materials like wood.
4.3 Material Selection (Orbital Action)
This jigsaw offers 5 orbital settings. Orbital action moves the blade slightly forward on the upstroke, providing faster cutting in softer materials. Use lower orbital settings (or no orbital action) for fine cuts, hard materials, or when cutting curves. Higher orbital settings are for aggressive, fast cuts in wood or plastic.
۵.۲ تکنیکهای برش
- برشهای مستقیم: Use a guide or straight edge for accurate straight cuts. Ensure the base plate is flat against the workpiece.
- برشهای منحنی: For curved cuts, use a narrow blade and apply steady, even pressure. Do not force the tool.
- برشهای پلانج: If performing a plunge cut (cutting into the middle of a workpiece), ensure the blade is clear of the material before starting the tool. Tilt the tool forward, resting the front edge of the base plate on the workpiece, then slowly lower the blade into the material.
- پشتیبانی مواد: Always support the workpiece firmly to prevent vibration and ensure a clean cut. Clamp small pieces to a workbench.
5. تعمیر و نگهداری
5.1 تمیز کردن
- قطع برق: همیشه قبل از تمیز کردن ابزار را از برق بکشید.
- پاک کردن گرد و غبار: Regularly clean the ventilation openings and the blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air.
- پاک کردن: قسمت بیرونی ابزار را با یک پارچه نرم و لطیف پاک کنید.amp پارچه از مواد شیمیایی خشن یا پاک کننده های ساینده استفاده نکنید.
۵.۲ مراقبت و تعویض تیغه
- تیغه ها را بررسی کنید: Before each use, inspect the blade for sharpness and damage. A dull or damaged blade can lead to poor cut quality and increased strain on the tool.
- تعویض تیغهها: Replace blades as soon as they become dull or damaged. Refer to Section 3.1 for blade installation instructions.
- روغن کاری: No internal lubrication is required for this tool.
6 عیب یابی
If you encounter issues with your Skil 1061AA Jigsaw, refer to the following common problems and solutions:
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| ابزار شروع نمی شود | منبع تغذیه قطع است؛ سوئیچ معیوب است؛ سیم آسیب دیده است | Check power connection; Test outlet; Contact service for switch/cord replacement. |
| Cuts are not straight or precise | Dull or incorrect blade; Blade not securely clamped; Excessive orbital action; Forcing the tool; Base plate not flat. | Replace blade; Ensure blade is tight; Reduce orbital setting; Apply less pressure; Ensure base plate is flush with workpiece. |
| لرزش یا سر و صدای زیاد | تیغه شل؛ تیغه آسیب دیده؛ اجزای داخلی فرسوده. | Check blade security; Replace blade; If problem persists, contact service. |
| Blade gets stuck or overheats | Incorrect blade for material; Forcing the cut; Insufficient cooling. | Use appropriate blade; Reduce feed pressure; Allow tool to cool; Ensure ventilation openings are clear. |
For issues not listed here or if solutions do not resolve the problem, please contact Skil customer support or an authorized service center.
7. مشخصات
Technical specifications for the Skil 1061AA Corded Electric Jigsaw:
| ویژگی | ارزش |
|---|---|
| سازنده | Skil |
| شماره مدل | F0151061AA |
| ورودی برق | 800 وات |
| سرعت بدون بار | 800 - 3000 strokes/min (spm) |
| طول تیغه | 100 میلی متر |
| ظرفیت برش (چوب) | 100 میلی متر |
| Cutting Capacity (Aluminum) | 10 میلی متر |
| ظرفیت برش (فولاد) | 4 میلی متر |
| ابعاد (L x W x H) | 30.4 × 28.6 × 10.2 سانتی متر |
| وزن | 2.5 کیلوگرم |
| منبع تغذیه | سیم برقی |
| باتری های مورد نیاز | خیر |
8. گارانتی و پشتیبانی
Skil products are manufactured to high-quality standards and are subject to stringent quality controls. This tool is covered by a manufacturer's warranty, details of which can be found on the official Skil website or in the warranty card included with your purchase. Please retain your proof of purchase for any warranty claims.
For technical assistance, spare parts, or service, please contact Skil customer support or visit an authorized Skil service center. Contact information can typically be found on the Skil official webسایت یا در مستندات ارائه شده با ابزار شما.
