1. مقدمه
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips F48T12/D/HO/ALTO Fluorescent Tube Light Bulb (Model 369843). Please read these instructions carefully before use and retain them for future reference.
The Philips F48T12/D/HO/ALTO is a 60-watt, 48-inch T12 fluorescent tube designed for high output applications. It features a Recessed Double Contact (R17d) base and emits a 6,500K Daylight white light, providing 3400 lumens of brightness. This bulb is engineered for energy efficiency and has an average lifetime of 12,000 hours.
2. اطلاعات ایمنی
WARNING: Risk of electric shock. Always turn off power at the circuit breaker or fuse box before installation, removal, or maintenance.
- Ensure the fixture is compatible with T12 fluorescent bulbs and the R17d base type.
- Do not use this bulb with dimmers unless specifically rated for fluorescent dimming systems.
- Handle the bulb carefully. Do not drop or subject it to excessive force.
- If the bulb breaks, ventilate the area and carefully clean up glass fragments and mercury-containing materials according to local regulations. Avoid direct contact with skin.
- Do not operate the bulb in wet locations or where it may be exposed to water.
- دور از دسترس کودکان نگهداری شود.
3. راه اندازی و نصب
- خاموش کردن برق: Before attempting any installation, ensure the power supply to the fixture is completely turned off at the main circuit breaker or fuse box.
- لامپ قدیمی را بردارید (در صورت وجود): If replacing an existing bulb, carefully rotate and pull the old fluorescent tube from its sockets. Dispose of the old bulb properly according to local regulations.
- بررسی فیکسچر: Check the fixture's sockets for any damage or corrosion. Ensure they are clean and in good working order.
- نصب حباب جدید: Align the Recessed Double Contact (R17d) pins on each end of the Philips F48T12/D/HO/ALTO bulb with the slots in the fixture's sockets. Gently push the bulb into the sockets and rotate it until it is securely seated. Do not force the bulb.
- بازیابی برق: پس از نصب ایمن لامپ، برق را از طریق کلید قطع کننده مدار یا جعبه فیوز به لامپ وصل کنید.
- تست: برای اطمینان از عملکرد صحیح، کلید چراغ را روشن کنید.
4. دستورالعمل های عملیاتی
The Philips F48T12/D/HO/ALTO fluorescent tube operates like any standard fluorescent light bulb. Once properly installed and power is restored to the fixture, simply use the wall switch or fixture control to turn the light on and off.
- راه اندازی اولیه: Some fluorescent bulbs may flicker briefly or take a moment to reach full brightness upon initial start-up, especially in colder environments. This is normal.
- خروجی نور: The bulb provides 3400 lumens of 6,500K Daylight white light, suitable for areas requiring bright, cool-toned illumination.
5. تعمیر و نگهداری
Minimal maintenance is required for your Philips fluorescent tube. Regular cleaning and proper disposal are key to ensuring longevity and safety.
- تمیز کردن: Ensure the power is off before cleaning. Wipe the bulb gently with a soft, dry, or slightly damp پارچه از پاک کننده ها یا حلال های ساینده استفاده نکنید.
- جایگزینی: The average lifetime of this bulb is 12,000 hours. When the bulb reaches the end of its life, it may flicker, dim, or fail to light. Replace it following the installation instructions in Section 3.
- دفع: Fluorescent bulbs contain small amounts of mercury and should not be disposed of in regular household trash. Check with your local waste management authority for proper recycling or disposal options in your area. Many retailers also offer recycling programs for fluorescent bulbs.
6 عیب یابی
If your Philips F48T12/D/HO/ALTO fluorescent tube is not functioning as expected, consider the following common issues and solutions:
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| لامپ روشن نمی شود | هیچ قدرتی به وسایل ندارد لامپ به درستی در جای خود قرار نگرفته است. Defective bulb or ballast. |
کلید/فیوز مدار را بررسی کنید. Ensure bulb is securely installed (see Section 3). Replace bulb. If problem persists, consult an electrician for ballast inspection. |
| لامپ سوسو میزند یا صدا میدهد. | بالاست قدیمی یا خراب. اتصال سست. محیط سرد. |
Consult an electrician to inspect/replace ballast. مطمئن شوید که لامپ محکم در جای خود قرار گرفته است. Allow time for bulb to warm up. |
| کاهش خروجی نور. | لامپ به پایان عمر خود نزدیک میشود. Dirty bulb. |
لامپ را تعویض کنید Clean bulb (see Section 5). |
7. مشخصات
| نام تجاری | فیلیپس |
| شماره مدل | 369843 |
| نوع نور | فلورسنت |
| اندازه شکل لامپ | T12 (48 inches) |
| نوع پایه | Recessed Double Contact (R17d) |
| واتtage | 60 وات |
| وات معادل رشته ایtage | 200 وات |
| رنگ روشن | سفید روز |
| دمای رنگ | 6500 کلوین |
| روشنایی | 3400 لومن |
| شاخص رندر رنگ (CRI) | 79 |
| میانگین طول عمر | 12,000 ساعت |
| ویژگی خاص | انرژی کارآمد |
| نوع مواد | مس |
| UPC | 046677369842 |
8. گارانتی و پشتیبانی
Philips products are manufactured to high-quality standards. Specific warranty details for your Philips F48T12/D/HO/ALTO Fluorescent Tube Light Bulb are typically provided with the product packaging or can be found on the official Philips lighting webسایت
For technical support, warranty claims, or further assistance, please contact Philips customer service. You can usually find contact information on the product packaging or by visiting the official Philips webسایت: