1. محصول تمام شدview
The Franke MK24-36C Manor House Bottom Sink Grid is designed to provide a protective and functional surface for your Franke MHK110-24 fireclay sink. It helps safeguard the sink's finish while offering a stable area for food preparation or dishwashing.
Image 1.1: The Franke MK24-36C Manor House Bottom Sink Grid, featuring its coated stainless steel construction and rectangular design, specifically tailored for the MHK110-24 sink model.
ویژگی های کلیدی:
- Coated Stainless Steel Construction: دوام و مقاومت در برابر خوردگی را تضمین میکند.
- پایه لاستیکی: Elevate the grid to prevent slipping and protect the sink surface.
- تناسب سفارشی: Specifically designed to completely cover the base of the Franke Manor House MHK110-24 sink.
نکته مهم: Extremely hot temperatures will damage the coated finish. This grid is not recommended for use as a trivet for hot pots or pans directly from the stove or oven.
2. راه اندازی و نصب
The Franke MK24-36C sink grid requires no complex installation. It is designed for simple placement within your compatible sink.
- باز کردن بسته: Carefully remove the sink grid from its packaging.
- بازرسی کنید: Check the grid for any signs of damage during transit.
- قرار دادن: Gently lower the grid into the bottom of your Franke MHK110-24 sink. Ensure the rubber feet are resting evenly on the sink surface.
- موقعیت یابی: Adjust the grid until it sits securely and covers the entire base of the sink.
The rubber feet are crucial for elevating the grid, allowing water to drain freely and preventing direct contact between the metal grid and the sink's finish.
3. دستورالعمل های عملیاتی
The sink grid serves multiple purposes to enhance your kitchen sink's functionality and longevity.
- Sink Protection: Place dishes, pots, and utensils on the grid to prevent scratches, chips, and other damage to the sink's bottom surface.
- تهیه غذا: Use the grid as a stable surface for rinsing vegetables, draining pasta, or preparing food items directly in the sink.
- خشک کردن هوا: Allow washed items to air dry on the grid, promoting better airflow and quicker drying.
- Elevated Washing: The grid elevates items slightly, which can be beneficial for washing larger items or for general dishwashing tasks.
4. تعمیر و نگهداری
Proper care will ensure the longevity and appearance of your Franke sink grid.
- نظافت منظم: Wipe the grid with a dry cloth regularly to remove food particles and water spots.
- تمیزکاری کامل: For more thorough cleaning, use mild soap and water. Avoid abrasive cleaners or scouring pads, which can damage the coated finish.
- آبکشی کامل: After cleaning with soap, rinse the grid thoroughly with clean water.
- کاملا خشک کنید: Ensure the grid is completely dry before placing it back in the sink to prevent water spots or mineral buildup.
- اجتناب از گرمای شدید: As noted, do not place extremely hot items directly on the grid, as this can melt or damage the protective coating.
5 عیب یابی
Addressing common concerns regarding your sink grid.
- Grid Does Not Fit: Ensure you have the correct model (MK24-36C) for your Franke MHK110-24 sink. This grid is custom-designed for this specific sink model. If your sink is a different model, the grid may not fit correctly.
- آسیب پوشش: If the coating shows signs of melting or splitting, it is likely due to exposure to high heat. Remember to avoid placing hot pots or pans directly on the grid.
- Grid Slipping: Verify that all rubber feet are intact and properly positioned. The rubber feet are designed to prevent slipping and elevate the grid.
- لکه یا تغییر رنگ: For persistent stains, ensure you are using only mild cleaning agents. Certain harsh chemicals or prolonged contact with highly acidic or alkaline substances can affect the coating.
6. مشخصات
| نام تجاری | فرانکه |
| شماره مدل | MK24-36C |
| مدل سینک سازگار | MHK110-24 |
| مواد | فولاد ضد زنگ روکش شده |
| رنگ | فولاد ضد زنگ |
| ابعاد محصول | 16 x 20 x 2 اینچ |
| وزن مورد | 5.8 پوند |
| نوع نصب | شبکه پایین |
| دستورالعمل های مراقبت از محصول | با پارچه خشک پاک کنید |
7. گارانتی و پشتیبانی
For specific warranty information regarding your Franke MK24-36C Manor House Bottom Sink Grid, please refer to the documentation provided with your purchase or visit the official Franke website. Franke typically offers a manufacturer's warranty against defects in materials and workmanship.
For technical support, replacement parts, or further assistance, please contact Franke customer service directly through their official channels. Keep your purchase receipt and product model number (MK24-36C) readily available when contacting support.
رسمی فرانک Webسایت: www.franke.com
