مقدمه
The Behringer EUROLIGHT LC2412 is a professional 24-channel DMX lighting console designed for controlling stage lighting systems. It offers comprehensive features for programming and executing complex lighting scenes, making it suitable for various applications from theater productions to live events. This manual provides essential information for the safe and effective operation, setup, and maintenance of your LC2412 console.
Image: Behringer EUROLIGHT LC2412 Professional 24 Channel DMX Lighting Console. This image displays the front panel of the console with its faders, buttons, and display screen.
دستورالعمل های ایمنی
- منبع تغذیه: Connect the console only to the specified power source. Ensure the voltage matches the console's requirements.
- تهویه: منافذ تهویه را مسدود نکنید. برای جلوگیری از گرم شدن بیش از حد، جریان هوای کافی را در اطراف دستگاه تضمین کنید.
- رطوبت: Avoid exposing the console to rain, moisture, or liquids. Do not operate with wet hands.
- تمیز کردن: قبل از تمیز کردن، برق را قطع کنید. از یک پارچه خشک و نرم استفاده کنید. از پاک کننده های مایع یا آئروسل استفاده نکنید.
- سرویس دهی: تمام مراحل سرویس را به پرسنل خدمات واجد شرایط ارجاع دهید. خودتان سعی در تعمیر دستگاه نکنید.
- قرار دادن: Place the console on a stable, level surface. Avoid placing it near heat sources or in direct sunlight.
راه اندازی
1. باز کردن بسته بندی
Carefully remove the console from its packaging. Inspect the unit for any signs of damage during transit. Retain the original packaging for future transport or storage.
2. اتصال برق
Connect the provided power cable to the power input on the rear of the console and then to a suitable electrical outlet. Ensure the power switch is in the OFF position before connecting.
3. Connecting DMX Devices
Use standard DMX cables (3-pin or 5-pin XLR, depending on your fixtures) to connect your DMX-compatible lighting fixtures to the DMX OUT port on the console. Connect fixtures in a daisy-chain configuration. Ensure the last fixture in the chain has a DMX terminator connected to its DMX OUT port to prevent signal reflection.
۴. روشن کردن اولیه
Once all connections are secure, switch the power ON. The console will perform a self-test, and the display will illuminate.
دستورالعمل های عملیاتی
1. Control Overview
The LC2412 features 24 preset channels, each with a dedicated fader. Additional controls include master faders, scene memory buttons, crossfade controls, and a display for programming and status information.
2. DMX Channel Assignment (Patching)
The console allows assigning up to 3 DMX channels per preset channel. This feature enables control of multi-parameter fixtures or groups of single-parameter fixtures from a single fader. Refer to the detailed manual for specific steps on entering patch mode and assigning DMX addresses.
3. Scene Programming
The LC2412 can store up to 120 scenes across 10 banks.
- سطوح تنظیم شده: Adjust the individual channel faders to achieve the desired lighting look for your scene.
- Select Bank: Choose the desired memory bank using the bank selection buttons.
- Store Scene: Press the "STORE" button, then select the scene memory button where you wish to save the scene. Confirm the storage if prompted.
توجه: Ensure the console is in the correct operating mode (e.g., "LIVE" or "PROGRAM") when attempting to store scenes.
4. Crossfade Operation
The console features a freely selectable crossfade time for smooth transitions between scenes. Adjust the crossfade time using the dedicated control, then activate the crossfade function to transition between the active scene and the next selected scene.
5. Special Effects Channels
Two additional multi-functional channels are available for controlling special effects devices such as fog machines or color changers. These channels can be assigned and controlled independently.
تعمیر و نگهداری
1. تمیز کردن
To clean the console, first disconnect it from the power supply. Use a soft, dry, lint-free cloth to wipe down the surfaces. For stubborn dirt, a slightly damp میتوان از یک پارچه تمیز استفاده کرد و بلافاصله پس از آن یک پارچه خشک استفاده کرد. از پاککنندههای ساینده، حلالها یا واکسها خودداری کنید.
2. ذخیره سازی
When not in use for extended periods, store the console in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging or a protective case to prevent dust accumulation and physical damage.
عیب یابی
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| بدون قدرت | Power cable disconnected; faulty outlet; console power switch off. | اتصالات کابل برق را بررسی کنید؛ پریز را با دستگاه دیگری آزمایش کنید؛ مطمئن شوید که سوئیچ برق روشن است. |
| چراغ ها پاسخ نمی دهند | Incorrect DMX patching; DMX cable issue; fixture not addressed correctly; DMX terminator missing. | Verify DMX patching in console; check DMX cable integrity; confirm fixture DMX address settings; ensure DMX terminator is on the last fixture. |
| Scenes not storing | Console not in program mode; incorrect storage procedure. | Ensure console is in the correct programming mode; follow scene storage steps precisely as outlined in the manual. |
| Faders feel loose or unresponsive | Normal wear and tear; internal component issue. | While some looseness can be normal, significant issues may require professional servicing. |
For more detailed troubleshooting steps and advanced issues, please consult the full product manual or contact Behringer customer support.
مشخصات
- وزن مورد: 9.46 پوند
- ابعاد محصول: 17.4 x 10.94 x 4.17 اینچ
- شماره مدل کالا: LC2412
- نوع مواد: فولاد
- نام رنگ: مشکی
- کانال ها: 24 preset channels, assignable to 512 DMX channels
- DMX Channels per Preset: تا 3
- صحنه ها: 120 scenes storable in 10 banks
- Crossfade: Freely selectable crossfade time
- Special Effects Channels: Two additional multi-functional channels
گارانتی و پشتیبانی
Behringer products are covered by a limited warranty. For detailed warranty information, registration, and technical support, please visit the official Behringer webبه سایت مراجعه کنید یا با توزیعکننده محلی خود تماس بگیرید. فاکتور خرید خود را برای موارد گارانتی نگه دارید.
