1. مقدمه
This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your DEWALT DW715 12-Inch Compound Miter Saw. Designed for precision and durability, this saw is equipped with a powerful 15 Amp motor, delivering 4,000 rpm for efficient cutting of various materials. Please read this manual thoroughly before operating the saw to ensure proper use and to prevent injury.
اطلاعات مهم ایمنی: For safe operation, always read and understand the instruction manual completely before using this product. Failure to follow all instructions may result in serious injury.
2. راه اندازی و مونتاژ
Upon receiving your DEWALT DW715 miter saw, carefully unpack all components and inspect for any damage. Ensure all parts listed in the packing contents are present. The saw comes partially assembled, requiring minimal setup before use.
2.1 نصب تیغه
The saw includes a carbide blade and a blade wrench for installation. Refer to the detailed instructions in the full manual for safe blade attachment and removal. Always ensure the saw is unplugged before performing any blade-related tasks.
۳.۲ محکم کردن اره
For stable and accurate operation, securely mount the miter saw to a workbench or a compatible miter saw stand. Ensure the mounting surface is level and capable of supporting the saw's weight and operational forces.
3. دستورالعمل های عملیاتی
The DEWALT DW715 is designed for precise cutting applications. Familiarize yourself with its controls and adjustments before making any cuts.
۴.۱ قدرت و عملکرد
The saw is powered by a 15 Amp motor, delivering a no-load speed of 4,000 revolutions per minute (rpm). This power is suitable for cutting framing lumber, molding, and other crosscutting and miter-cutting tasks.
3.2 Miter Angle Adjustments
The precise miter system features an adjustable stainless steel miter detent plate with 11 positive stops for common miter angles. To adjust the miter angle:
- Loosen the cam-lock miter handle.
- Rotate the turntable to the desired angle. The detent plate allows for quick stops at common angles.
- For angles between detents, use the detent override feature.
- Securely tighten the cam-lock miter handle to lock the angle in place.
The saw offers a wide miter capacity of 0 to 50 degrees to both the left and the right.
3.3 Bevel Angle Adjustments
The saw allows for bevel cuts with a capacity of 0 to 48 degrees to the left and 0 to 3 degrees to the right. Hardened steel bevel stops are provided at 0, 33.9, 45, and 48 degrees for quick and accurate settings.
3.4 Fence System
The tall sliding fence supports crown molding up to 5-1/4 inches nested vertically and base molding up to 6-1/2 inches vertically against the fence. For bevel cuts, the fence can be easily slid out of the way to accommodate the blade angle.
۴.۴ ظرفیت برش
The 12-inch blade allows for crosscuts through dimensional lumber up to 2x8 inches.
۴.۳ قابلیت حمل
Weighing approximately 42 pounds, the DW715 features a built-in carry handle for convenient transport around the jobsite or for storage.
4. تعمیر و نگهداری
Regular maintenance ensures the longevity and optimal performance of your DEWALT DW715 miter saw.
4.1 تمیز کردن
After each use, disconnect the saw from power and clean sawdust and debris from the motor vents, blade guard, and table surface. The included dust bag should be emptied regularly to maintain efficient dust collection.
۵.۲ مراقبت و تعویض تیغه
Periodically inspect the blade for sharpness and damage. A dull or damaged blade can lead to poor cut quality and increased motor strain. Use the provided blade wrench for safe blade replacement. Always use a 12-inch blade compatible with your saw's specifications.
5 عیب یابی
This section addresses common issues you might encounter during the operation of your miter saw.
- اره روشن نمیشود: Ensure the power cord is securely plugged into a functional outlet. Check for tripped circuit breakers.
- کیفیت برش ضعیف (لبههای ناهموار، سوختگی): The blade may be dull, dirty, or incorrect for the material being cut. Replace or clean the blade as necessary. Ensure the material is properly supported and clampویرایش
- Inaccurate cuts: Verify that the miter and bevel scales are correctly set and locked. Check for any play in the saw's components or if the fence is misaligned. Calibration may be required.
- ارتعاش بیش از حد: Ensure the saw is securely mounted. Check if the blade is properly installed and not warped.
For issues not covered here, or if problems persist, contact DEWALT customer support or a qualified service technician.
6. مشخصات
| ویژگی | مشخصات |
|---|---|
| شماره مدل | DW715 |
| منبع تغذیه | سیم برقی |
| جلدtage | 120 ولت |
| Ampخشم | 15 Amps |
| سرعت بدون بار | 4000 دور در دقیقه |
| قطر تیغه | 12 اینچ |
| Miter Capacity (Left/Right) | 0-50 درجه |
| Bevel Capacity (Left/Right) | 0-48 degrees Left, 0-3 degrees Right |
| وزن مورد | ۵.۶۳ پوند (تقریباً ۲.۵۵ کیلوگرم) |
| ابعاد محصول | 26.1 اینچ طول × 19.6 اینچ عرض × 17.2 اینچ ارتفاع |
| جنس تیغه | Stainless Steel (Carbide blade included) |
| مواد دسته | آلومینیوم |
7. گارانتی و پشتیبانی
Your DEWALT DW715 12-Inch Compound Miter Saw is backed by a comprehensive warranty package:
- 3 سال گارانتی محدود: نقصهای مربوط به مواد یا نحوهی ساخت را پوشش میدهد.
- 1-Year Free Service Contract: Provides free maintenance for one year from the date of purchase.
- ضمانت بازگشت وجه ۳۰ روزه: Allows for a full refund within 90 days if you are not completely satisfied.
For warranty claims, service, or technical support, please refer to the contact information provided with your product packaging or visit the official DEWALT webسایت
