DEWALT 18V XRP Battery Pack (DC9096-2) Instruction Manual

1. مقدمه

The DEWALT 18V XRP Battery Pack (DC9096-2) is designed to provide extended runtime for your DEWALT 18V cordless tools. This pack includes two high-capacity NiCAD batteries, offering reliable power and consistent performance for a wide range of applications. This manual provides detailed instructions for the safe operation, charging, maintenance, and troubleshooting of your battery pack.

Figure 1: DEWALT 18V XRP Battery Pack (DC9096-2)

2. ویژگی های کلیدی

• ظرفیت بالا: Includes two XRP NiCAD batteries designed for 25% more runtime compared to standard NiCAD batteries.
• سازگاری گسترده: Powers the entire DEWALT line of 18V tools, allowing for versatile use across multiple devices (excluding Univolt tools).
• عملکرد قابل اعتماد: Utilizes top-quality NiCAD cells for consistent and adaptable power delivery.
• زمان اجرا پیشرفته: Features extended runtime technology, delivering increased operational duration for demanding tasks.

3. دستورالعمل های ایمنی

Always follow these safety guidelines to prevent injury and damage to the battery pack or tools:

• Do not incinerate the battery pack, even if it is severely damaged or completely dead. The battery can explode in a fire.
• پایانه های باتری را اتصال کوتاه نکنید.
• باتری را در حالت آماده به کار شارژ نکنیدamp یا محیط های مرطوب
• Use only DEWALT chargers specified for this battery pack. Using other chargers may result in fire, electric shock, or damage to the battery.
• Do not store the battery pack in locations where the temperature may reach or exceed 120°F (49°C), such as in a shed or metal building in summer.
• Do not open or disassemble the battery pack. There are no user-serviceable parts inside.
• بسته های باتری را دور از دسترس کودکان قرار دهید.

4. شارژ باتری

To ensure optimal performance and longevity, always charge your DEWALT 18V XRP battery pack using a compatible DEWALT charger.

1. شارژر را به پریز برق مناسب وصل کنید.
2. بسته باتری را محکم داخل شارژر بلغزانید تا در جای خود قرار گیرد.
3. The charging indicator light on the charger will illuminate, typically red, to indicate that charging has begun.
4. Once the battery is fully charged, the indicator light will change (e.g., to green or turn off, depending on the charger model).
5. Remove the battery pack from the charger by pressing the release buttons and sliding it out.

5. نصب و خارج کردن باتری

Proper installation and removal ensure secure connection and prevent damage to the battery or tool.

5.1. نصب و راه اندازی

1. Align the battery pack with the battery port on your DEWALT 18V tool.
2. Slide the battery pack into the tool until you hear a click, indicating it is securely latched.
3. قبل از کار با ابزار، مطمئن شوید که باتری کاملاً در جای خود قرار گرفته است.

5.2. حذف

1. Locate the battery release buttons on the sides of the battery pack.
2. Press and hold both release buttons simultaneously.
3. باتری را از ابزار بیرون بکشید.

6. Operation with DEWALT 18V Tools

The DEWALT 18V XRP Battery Pack is designed to seamlessly integrate with your existing DEWALT 18V cordless tools. Once installed, the battery provides power for the tool's motor. Always refer to your specific tool's instruction manual for detailed operating procedures, safety warnings, and recommended applications.

• Ensure the battery is fully charged before starting any task to maximize performance and runtime.
• Avoid over-discharging the battery, as this can reduce its overall lifespan.
• If the tool's performance decreases significantly, it is an indication that the battery needs recharging.

7. نگهداری و ذخیره سازی

Proper care and storage will extend the life of your DEWALT 18V XRP battery packs.

• تمیز کردن: Keep the battery terminals clean. Use a clean, dry cloth to wipe off any dust or debris.
• ذخیره سازی: Store battery packs in a cool, dry place, away from direct sunlight and excessive heat. Ideal storage temperature is below 80°F (27°C).
• ذخیره سازی طولانی مدت: For long-term storage, charge the battery packs fully before storing. Recharge them every 6 months to maintain their capacity.
• بازیافت: NiCAD batteries should be recycled responsibly. Do not dispose of them in household waste. Look for local battery recycling programs.

8 عیب یابی

If you encounter issues with your battery pack, consider the following common solutions:

• شارژ نشدن باتری:
  • مطمئن شوید که شارژر به درستی به پریز برق سالم وصل شده است.
  • Check if the battery is fully seated in the charger.
  • Verify that the battery terminals are clean and free of obstruction.
  • If the charger indicates a fault (e.g., flashing light pattern), consult the charger's manual.
• کاهش زمان اجرا:
  • The battery may be nearing the end of its lifespan.
  • قبل از استفاده از شارژ کامل باتری اطمینان حاصل کنید.
  • Operating tools in extreme temperatures can affect battery performance.
• Battery Not Fitting in Tool:
  • Ensure the battery is correctly aligned with the tool's battery port.
  • Check for any debris or damage in the battery port or on the battery itself.

If problems persist, contact DEWALT customer service or an authorized service center.

9. مشخصات

10. اطلاعات گارانتی

The DEWALT 18V XRP Battery Pack (DC9096-2) comes with the following warranty and service terms:

• ضمانت بازگشت وجه ۳۰ روزه: If you are not completely satisfied with the performance of your DEWALT power tool, laser, or nailer for any reason, you can return it within 90 days from the date of purchase for a full refund.
• 1-Year Free Service Contract: DEWALT ابزار را نگهداری می کند و قطعات فرسوده ناشی از استفاده معمولی را به صورت رایگان در هر زمانی در طول سال اول پس از خرید جایگزین می کند.
• 3 سال گارانتی محدود: DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse.

For full warranty details and to register your product, please visit the official DEWALT webسایت یا با پشتیبانی مشتری تماس بگیرید.