1. اطلاعات ایمنی
Always observe basic safety precautions when operating power tools to reduce the risk of fire, electric shock, and serious personal injury. Read and understand all instructions before operating this machine.
قوانین ایمنی عمومی
- از تجهیزات حفاظت فردی (PPE) مناسب استفاده کنید: Always wear safety glasses or goggles, hearing protection, and a dust mask. Heavy-duty gloves are recommended.
- محل کار را تمیز و روشن نگه دارید: مناطق به هم ریخته یا تاریک باعث تصادف می شوند.
- در محیطهای انفجاری کار نکنید: Do not use power tools in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- کودکان و اطرافیان را دور نگه دارید: حواس پرتی می تواند باعث از دست دادن کنترل شما شود.
- قطعه کار ایمن: همیشه clamp the material firmly before cutting.
- Avoid awkward body positions: پای مناسب و تعادل را همیشه حفظ کنید.
- قطع برق: Always disconnect the machine from the power source before making adjustments, changing accessories, or performing maintenance.
Specific Cut-Off Machine Safety
- Use correct abrasive wheels: Only use 14-inch abrasive cut-off wheels rated for the machine's RPM.
- Inspect wheel before use: Do not use cracked, chipped, or damaged wheels.
- Ensure wheel guard is in place: Never operate the machine without the wheel guard properly installed and functioning.
- Be aware of sparks and debris: Cutting operations produce sparks and hot debris. Clear the area of flammable materials and ensure bystanders are at a safe distance.
- Allow wheel to reach full speed: Before beginning a cut, allow the abrasive wheel to reach its full operating speed.
2. محصول تمام شدview
The Milwaukee 6175-8 is a 14-inch abrasive cut-off machine designed for efficient and portable cutting of various metal materials. It features a powerful 15 amp motor, a durable cast-iron base, and a spindle lock for convenient blade changes. The pivoting wheel guard enhances safety during operation.
ویژگی های کلیدی
- قدرتمند 15 amp motor for demanding cutting tasks.
- Robust cast iron base for stability and durability.
- Spindle lock mechanism for quick and easy abrasive wheel changes.
- Pivoting wheel guard for enhanced user protection.
- Integrated one-piece carrying handle for portability.
- Quick-release locking vise for secure material clamping and angle cutting up to 45 degrees.
Image 2.1: The Milwaukee 6175-8 14-Inch Abrasive Cut-Off Machine. This image shows the overall design of the machine, including the motor housing, cutting arm, base, and vise assembly.
3. راه اندازی
بسته بندی و بازرسی
- دستگاه و تمام لوازم جانبی را با دقت از بسته بندی خارج کنید.
- Inspect the machine for any damage that may have occurred during shipping. If any damage is found, do not operate the machine and contact customer service.
- Verify that all components listed in the packing list are present: cut-off machine, vise, abrasive wheel, and hex wrench.
آماده سازی محل کار
- Place the machine on a stable, level surface capable of supporting its weight and the workpiece.
- برای ایمنی کار و جابجایی مواد، از فضای کافی در اطراف دستگاه اطمینان حاصل کنید.
- Clear the area of any flammable materials due to sparks generated during cutting.
Abrasive Wheel Installation
- مطمئن شوید که دستگاه از منبع تغذیه جدا شده است.
- دکمه قفل اسپیندل را فشار داده و نگه دارید.
- Using the provided hex wrench, loosen and remove the arbor nut and outer flange.
- Place the new 14-inch abrasive wheel onto the arbor, ensuring it is seated correctly against the inner flange.
- Reinstall the outer flange and arbor nut. Tighten the arbor nut securely while holding the spindle lock button. Do not overtighten.
- Release the spindle lock button and manually rotate the wheel to ensure it spins freely and is properly aligned.
Vise Adjustment
- The quick-release vise allows for rapid clamping و unclampانجام قطعات کار
- To adjust for different material sizes, loosen the vise handle and slide the movable jaw to the desired position.
- For angle cuts, the vise can be pivoted up to 45 degrees. Loosen the appropriate bolts on the base, adjust the vise to the desired angle using the angle guide, and then securely tighten the bolts.
4. دستورالعمل های عملیاتی
اتصال برق
- Connect the machine to a standard 120 Volts AC power outlet. Ensure the circuit can handle the 15 amp motor load.
مواد Clamping
- Place the workpiece firmly against the fence and within the vise jaws.
- Tighten the quick-release vise handle to secure the material. Ensure the material is held firmly and will not shift during the cut.
- The machine can cut pipe up to 5" O.D., bar stock up to 3-5/8", and square stock up to 5".
ساخت برش
- اطمینان حاصل کنید که قطعه کار به طور ایمن clampو منطقه پاک شده است.
- Lower the cutting arm slightly to ensure the abrasive wheel clears the workpiece.
- Press the ON switch to start the motor. Allow the abrasive wheel to reach its full operating speed of 3900 RPM before beginning the cut.
- Slowly and steadily lower the cutting arm, allowing the abrasive wheel to cut through the material. Do not force the cut; let the wheel do the work.
- Once the cut is complete, release the ON switch and allow the wheel to stop rotating before raising the cutting arm.
- unclamp the workpiece and remove it from the machine.
5. تعمیر و نگهداری
Regular maintenance ensures the longevity and safe operation of your Milwaukee cut-off machine. Always disconnect the machine from the power source before performing any maintenance.
تمیز کردن
- After each use, clean the machine to remove metal dust and debris. Use a brush or compressed air.
- Do not use solvents or harsh chemicals that could damage plastic parts.
- Keep ventilation openings clear to prevent motor overheating.
Abrasive Wheel Replacement
- Replace abrasive wheels when they become worn down, chipped, or damaged. Refer to the "Abrasive Wheel Installation" section for detailed steps.
بازرسی عمومی
- Periodically inspect the power cord for damage. If damaged, have it replaced by a qualified service technician.
- Check all nuts, bolts, and screws for tightness. Tighten as necessary.
- Ensure the wheel guard operates freely and returns to its protective position.
- Inspect the vise mechanism for smooth operation and secure clamping.
6 عیب یابی
این بخش به مشکلات رایجی که ممکن است با دستگاه برش خود با آنها مواجه شوید، میپردازد.
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| ماشین روشن نمی شود | بدون منبع تغذیه کابل برق معیوب Motor overload protection tripped | پریز برق و قطع کننده مدار را بررسی کنید سیم را از نظر آسیب دیدگی بررسی کنید؛ در صورت لزوم آن را تعویض کنید Allow motor to cool; reduce load |
| Excessive sparks or smoke during cutting | Dull or incorrect abrasive wheel برش اجباری Improper material clamping | Replace with a new, sharp abrasive wheel Reduce feed pressure; allow wheel to cut at its own pace Ensure workpiece is securely clamped |
| برشهای نادرست | Loose workpiece Vise not set correctly Worn abrasive wheel | ایمن clamp قطعه کار Check vise angle and tightness Replace the abrasive wheel |
| لرزش بیش از حد دستگاه | اجزای شل Damaged or unbalanced abrasive wheel Unstable work surface | تمام بستها را بررسی و محکم کنید Inspect and replace abrasive wheel if damaged Ensure machine is on a stable, level surface |
7. مشخصات
Technical specifications for the Milwaukee 6175-8 14-Inch Abrasive Cut-Off Machine.
| ویژگی | مشخصات |
|---|---|
| شماره مدل | 6175-8 |
| موتور Ampخشم | 15 Amps |
| جلدtage | 120 ولت AC |
| بدون بار RPM | 3900 دور در دقیقه |
| قطر تیغه | 14 اینچ |
| اندازه درختکاری | 1 اینچ |
| حداکثر زاویه برش | 45 درجه |
| Workpiece Capacity (Pipe O.D.) | 5 اینچ |
| Workpiece Capacity (Bar Stock) | 3-5/8 اینچ |
| Workpiece Capacity (Square Stock) | 5 اینچ |
| وزن مورد | 52.5 پوند |
| منبع تغذیه | سیم برقی |
| ویژگی خاص | قفل اسپیندل |
| انطباق | OSHA |
8. ضمانت و پشتیبانی
اطلاعات گارانتی
This Milwaukee 6175-8 Abrasive Cut-Off Machine is a reconditioned product. Reconditioned Milwaukee Products are covered by a پنج سال گارانتی محدود through the Milwaukee factory or an authorized service center. This warranty covers defects in material and workmanship. Please retain your proof of purchase for warranty claims.
پشتیبانی مشتری
For technical assistance, service, or warranty inquiries, please contact Milwaukee customer support or an authorized Milwaukee service center. Contact information can typically be found on the official Milwaukee webسایت یا در اسناد ارائه شده با خرید شما.
