دفترچه راهنمای تقویت‌کننده وای‌فای دوبانده 1200 مگابیت بر ثانیه Comfast CF-WR765AC

1. محصول تمام شدview

The Comfast CF-WR765AC is a high-performance 1200Mbps dual-band WiFi signal amplifier designed to extend your existing WiFi network coverage and eliminate dead spots. It features two high-gain 5dBi omnidirectional antennas and four independent signal amplifier chips to effectively enhance WiFi signals throughout your home or office.

This device is ideal for large multi-bedroom areas and houses with incomplete router coverage, providing true full-house WiFi coverage.

Figure 1: Comfast CF-WR765AC Dual Band WiFi Repeater

ویژگی های کلیدی:

• Dual Band Gigabit Speed: Up to 1200Mbps (300Mbps on 2.4GHz and 867Mbps on 5.8GHz).
• Enhanced Signal: Equipped with 4 independent Power Amplifier (PA) chips for stronger signal penetration and wider coverage.
• آنتن های خارجی: Two 5dBi omnidirectional antennas improve signal transmission and reception.
• چند حالت عملیاتی: Supports Repeater, AP, and Router modes for flexible application.
• راه اندازی آسان: ساده web-based setup, no app required.
• اتلاف گرمای کارآمد: Designed with cooling holes for stable operation.
• حافظه خاموش: تنظیمات را پس از قطع برق حفظ می‌کند.

Figure 2: Signal Doubling and Key Features

2. محتویات بسته

لطفا بسته را از نظر وجود موارد زیر بررسی کنید:

• 1 x Comfast CF-WR765AC WiFi Repeater
• 1 x دفترچه راهنمای کاربر
• (Power adapter may be included depending on region/seller)

Figure 3: Packaging and Device

3. مشخصات

شکل ۴: مشخصات دقیق محصول

Figure 5: Device Dimensions (129mm H, 85mm W, 50mm D)

۱. دستورالعمل‌های راه‌اندازی

The Comfast CF-WR765AC is designed for easy setup without the need for a dedicated mobile application. Follow these steps to configure your device:

1. روشن کردن: تکرارکننده وای‌فای را به پریز برق وصل کنید.
2. به وای‌فای ریپیتر متصل شوید: On your mobile phone or computer, connect to the WiFi network named "COMFAST_xxx" (where xxx is a unique identifier).
3. دسترسی به صفحه تنظیمات: a را باز کنید web مرورگر و آدرس IP را وارد کنید 192.168.10.1 در نوار آدرس
4. انتخاب حالت: On the setup interface, click on the "Repeater Mode" option.
5. Choose Network: Select the WiFi network you wish to extend from the list.
6. رمز عبور را وارد کنید: Input the password for your chosen WiFi network.
7. اعمال تنظیمات: Click "Settings" or "Apply". The indicator light on the repeater will turn blue when the setup is successful (this may take a few seconds).

شکل ۵: راهنمای راه‌اندازی آسان

5. حالت های عملیاتی

کامفست CF-WR765AC از چندین حالت عملیاتی برای رفع نیازهای مختلف شبکه پشتیبانی می‌کند:

5.1. Repeater Mode (Wireless to Wireless)

In Repeater Mode, the device extends the WiFi signal of your main router wirelessly. This mode is ideal for eliminating weak signal areas and dead spots, providing extended coverage to rooms far from your main router, such as bedrooms or bathrooms.

Figure 7: Repeater Mode (Wireless to Wireless)

5.2. AP/Router Mode (Wired to Wireless)

In AP/Router Mode, you can connect the device to your main router via an Ethernet cable. The repeater then transmits a new WiFi signal, effectively converting a wired connection into a wireless access point. This is useful if your main router is too far to provide a strong wireless signal, but you have an available Ethernet port.

Figure 8: AP/Router Mode (Wired to Wireless)

6. تعمیر و نگهداری

• قرار دادن: For optimal performance, place the repeater in a central location between your router and the area needing extended coverage. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.
• تمیز کردن: دستگاه را تمیز و عاری از گرد و غبار نگه دارید. برای تمیز کردن از یک پارچه نرم و خشک استفاده کنید. از پاک کننده های مایع یا آئروسل استفاده نکنید.
• تهویه: Ensure the cooling holes are not obstructed to allow for efficient heat dissipation.
• به روز رسانی سیستم عامل: به صورت دوره‌ای، اطلاعات سازنده را بررسی کنید webبرای اطمینان از عملکرد و امنیت بهینه، به سایت مراجعه کنید تا هرگونه به‌روزرسانی میان‌افزار موجود را مشاهده کنید.

Figure 9: Device Design for Heat Dissipation

Figure 10: Recommended Placement for Whole House Coverage

7 عیب یابی

• Cannot access setup page (192.168.10.1): Ensure your device is connected to the repeater's default WiFi network (COMFAST_xxx) and not your main router's network. Try clearing your browser's cache or using a different browser.
• No internet connection after setup: Double-check the password for your main WiFi network during setup. Ensure the repeater is within range of your main router.
• Weak signal from repeater: Try repositioning the repeater closer to your main router or in a more central location. Avoid physical obstructions like thick walls.
• Repeater not powering on: مطمئن شوید که به طور ایمن به پریز برق فعال وصل شده است.
• Forgotten password for repeater's management page: You may need to perform a factory reset. Locate the WPS/RST button (usually a small pinhole) and press and hold it for about 5-10 seconds until the lights flash, then release. The device will revert to factory default settings.

8. نکات کاربر

• For best performance, consider using the 5GHz band for devices that require higher speeds (e.g., streaming, gaming) and are closer to the repeater, as it offers faster speeds but has less wall penetration.
• The 2.4GHz band is better for devices further away or when signal needs to pass through walls, as it provides better range and wall penetration.
• If you experience slow speeds, try to minimize the number of devices connected to the extended network or ensure the repeater is not overloaded.

Figure 11: Understanding Dual Band Performance

9. گارانتی و پشتیبانی

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Comfast webسایت. فاکتور خرید خود را برای موارد گارانتی نگه دارید.