مقدمه
This manual provides detailed instructions for the installation, operation, and maintenance of your Veise VE017 Fingerprint Smart Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety. The Veise VE017 offers advanced security and convenience with multiple access methods including fingerprint, PIN code, key fobs, and traditional keys, all manageable via a smart app.
آنچه در جعبه است
قبل از شروع نصب، لطفاً از وجود همه اجزا اطمینان حاصل کنید:
- مونتاژ بیرونی
- مجمع داخلی
- پوشش باتری
- کارت کاربر x2
- بازنشانی ابزار x1
- چفت x1
- کلید مکانیکی x2
- صفحه تقویت کننده (اختیاری)
- اعتصاب کنید
- Strike Screws x5 (2 Spare)
- پیچ بست x2
- پیچ های صفحه نصب x2
- یقه درایو (اختیاری)
- صفحه نصب x1
راهنمای نصب
Important Notes for Installation:
- It is strongly recommended to keep the door open or ajar during installation.
- Do not close the door before inserting the batteries.
- Do not insert the batteries until the lock is fully installed.
Step 1: Measure the Dimensions
قبل از خریدasing and installing, ensure your door dimensions are compatible with the lock. Measure the hole spacing and door thickness.
- پشت: ۱-۱/۲ اینچ یا ۲-۱/۸ اینچ (۳۸ میلیمتر یا ۵۴ میلیمتر)
- قطر سوراخ: ۱-۳/۸ اینچ تا ۱-۳/۴ اینچ (۳۵ میلیمتر تا ۴۴ میلیمتر)
- ضخامت درب: 1-3/8" or 2" (35mm or 50mm). Door thickness out of spec may prevent lock operation.
- عمق سوراخ چفت: 1" (25mm). Ensure the door frame is aligned with the door. Verify there are no obstructions in the door frame. The hole in the door frame must be drilled to a minimum depth of 1" (25 mm).
مرحله 2: Latch and Strike را نصب کنید
Install the latch into the door edge. Ensure the "up" marking on the latch is correctly oriented. Confirm the type of hole in the edge of the door frame.
مهم:
The latch bolt should be fully retracted (in the unlocked position) before proceeding.
For doors with 1-1/2" (38mm) holes, temporarily install the Latch bolt to test if it fits properly. If the Latch bolt is stuck, you need to extend the Latch hole by at least 13/64" (5mm) deep using a 1" (25.4mm) Drill Bit.
مرحله 3: نصب Exterior Assembly
Route the cable below the latch and insert the torque blade through the slot in the latch. Install the mounting plate, ensuring it is parallel to the door edge and screws are not overtightened.
مرحله 4: اسمبلی داخلی را نصب کنید
Disassemble the battery cover. Insert the cable connector into the socket, pushing firmly until fully seated. Align the torque blade with the knob hole, ensuring the knob holes are parallel. Attach the interior assembly to the mounting plate and tighten the 3 screws. Finally, insert 4 AA Alkaline batteries.
مهم:
Do not install the batteries until the lock is fully installed. Be sure not to use the wrong screws, or it may lead to short-circuit and other problems.
مرحله ۷: قفل را ریست کنید
Using the reset tool, press and hold the reset button for 5 seconds until you hear "Restored to factory settings" and a "BEEP". This indicates a successful reset, and the latch will extend automatically. After the reset, the lock automatically recognizes the left and right doors. Attach the battery cover.
فیلم نصب
برای راهنمای تصویری، لطفاً ویدیوی رسمی نصب را تماشا کنید:
دستورالعمل های عملیاتی
Multiple Access Methods
The Veise VE017 Smart Door Lock offers 5 convenient access methods:
- اثر انگشت: Quick and secure biometric access.
- پین کد: Customizable numerical codes for entry.
- Key Fobs: RFID-enabled cards for tap-to-unlock convenience.
- کلید یدکی: Traditional mechanical key for emergency backup.
- KK Home App Control: Manage your lock remotely via the smartphone application.
Smart App and Web مدیر
Manage your lock's features and access permissions using the dedicated smartphone app or web manager. This allows for comprehensive control over your door security.
- مدیریت کاربران: Add or remove users and their access credentials.
- Access Time Logs: View a history of who entered and when.
- Grant Remote Access Offline: Provide temporary access even when not connected to the internet.
- سازگاری: The lock is compatible with Alexa and Google Home for integrated smart home control.
Multiple PIN Code Types
The smart lock supports various types of PIN codes to suit different access needs:
- Remote Unlimited One-Time PIN Code: For single-use access.
- Remote Unlimited Duration PIN Code: For access within a specified time frame.
- کد پین دائمی: For regular, unrestricted access.
- کد پین تکرارشونده: For scheduled, repeated access (e.g., for cleaners).
تعمیر و نگهداری
To ensure the longevity and optimal performance of your Veise VE017 Smart Door Lock, follow these maintenance guidelines:
- تعویض باتری: The lock uses 4 AA Alkaline batteries. Replace all batteries when the low battery indicator appears or when the lock's response time slows down. Always use new, high-quality alkaline batteries.
- تمیز کردن: قسمت بیرونی قفل را با یک اسفنج نرم و زبر تمیز کنید.amp از استفاده از پاککنندههای ساینده یا حلالهایی که میتوانند به روکش یا قطعات الکترونیکی آسیب بزنند، خودداری کنید.
- حسگر اثر انگشت: Keep the fingerprint sensor clean and free of dirt or oils for accurate readings.
- صفحه کلید: Regularly wipe the keypad to prevent grime buildup.
- اجزای مکانیکی: Periodically check the latch and strike plate for any obstructions or wear. Ensure the latch moves freely.
- به روز رسانی نرم افزار: Keep the associated smartphone app updated to the latest version to benefit from new features, security enhancements, and bug fixes.
عیب یابی
If you encounter issues with your Veise VE017 Smart Door Lock, consider the following common troubleshooting steps:
- قفل پاسخ نمیدهد:
- باتریها را بررسی کنید. اگر کم یا خالی شدهاند، آنها را تعویض کنید.
- Ensure the battery cover is securely attached and the cable connector is fully seated.
- Perform a factory reset (refer to Step 5 in the Installation Guide).
- اثر انگشت شناسایی نشد:
- اطمینان حاصل کنید که انگشت شما تمیز و خشک است.
- Try re-registering your fingerprint in the app.
- Clean the fingerprint sensor surface.
- کد پین کار نمیکند:
- Verify you are entering the correct PIN code.
- Check the PIN code's validity period (for duration or one-time codes) in the app.
- مطمئن شوید که صفحه کلید تمیز و پاسخگو است.
- مشکلات اتصال برنامه:
- Ensure Bluetooth is enabled on your smartphone and you are within range of the lock.
- برنامه و/یا تلفن هوشمند خود را مجدداً راه اندازی کنید.
- بهروزرسانیهای برنامه را بررسی کنید.
- If using Wi-Fi gateway (sold separately for remote access), ensure it is properly connected and configured.
- Latch Bolt Stuck:
- Ensure the latch hole in the door frame is deep enough and free of obstructions (refer to Step 1 and 2 of Installation).
- Check if the torque blade is correctly aligned with the knob hole (refer to Step 4 of Installation).
اگر این مراحل مشکل را حل نکرد، لطفاً با پشتیبانی مشتری تماس بگیرید.
مشخصات
| صفت | ارزش |
|---|---|
| نام تجاری | ویزه |
| مدل | VE017 |
| منبع تغذیه | باتری خشک |
| روش نصب | نصب حفاری |
| دسته جهت | جهت برگشت پذیر |
| نوع پایان | روغن مالیده شده است |
| عملکرد دستگیره در | Key & Keypad |
| راههای باز کردن قفل | کلیدهای مکانیکی |
| مبدا | سرزمین اصلی چین |
| شیمی نگران هیگن | هیچ کدام |
گارانتی و پشتیبانی
If you have any questions or require assistance with your Veise VE017 Smart Door Lock, please contact our customer support team first.
- تلفن رایگان: +1 (855) 400-3853 (USA)
- در دسترس بودن: دوشنبه تا جمعه، ۹:۰۰ صبح تا ۶:۰۰ بعد از ظهر (به وقت اقیانوس آرام)
- ایمیل: support@iveise.com (24/7 email support)
Please refer to the product packaging or official Veise webسایت برای جزئیات گارانتی خاص
