Gaqqee T3231 Digital Timer Relay Instruction Manual

1. مقدمه

The Gaqqee T3231 Digital Timer Relay is a versatile and programmable time delay switch designed for controlling various electrical loads such as lights, water pumps, and engines. It features a wide time range, dual LED display for easy setting, and support for multiple working modes to meet diverse application needs. This manual provides essential information for the safe and effective use of your T3231 timer relay.

2. ویژگی ها

محدوده زمانی گسترده: Digital cycle timer relay module with a time range from 1 second to 999 hours.
نمایشگر LED دوگانه: Red and blue dual LED display module with touch buttons for easy setting of delay time and working mode.
حالت های کاری چندگانه: Supports timer, cycle, and period working modes.
خروجی مستقیم: Input equals output, with 9 combinations of timing units.
Manual Trigger Support: Allows for manual triggering.
نصب تعبیه شده: Compact installation size of 77×39.3mm, suitable for various application scenarios.
Power-off Save: Settings are saved upon power-off; device resets upon power-on.
زنگ هشدار: Not equipped with a buzzer alarm.
Limit Cycle: 1-999 adjustable cycles.
حالت راه انداز: Auto trigger (default) or Manual trigger.
محرک خارجی: Reserved external trigger port for user-installed trigger devices.

3. مشخصات

صفت	ارزش
نام محصول	T3231 controller
نام تجاری	گاکی
شماره مدل	T3231 Digital Timer Relay
نظریه	رله زمان
جلد عملیاتیtage گزینه ها	DC12V (20A/240W), AC110~220V (1500W MAX), AC110~220V (2200W/10A MAX), DC24V (20A/480W)
نوع خروجی	Active output (prohibit short circuit)
نوع رله	1 way normally open relay
Timing Unit	Second/Minute/Hour
محدوده زمان بندی	0~999 (minimum unit of measurement 1 second)
اندازه محصول	79.5 × 42.1 × 27.8 میلی متر
Installation Aperture	77 × 39.3 میلی متر
گواهینامه	CE

برای مشخصات دقیق و اطلاعات تکمیلی لطفا به ادامه مطلب مراجعه نمایید راهنمای کاربر (PDF).

4. راه اندازی و نصب

4.1 ابعاد

The T3231 Digital Timer Relay has a product size of 79.5 × 42.1 × 27.8 mm and an installation aperture of 77 × 39.3 mm for embedded installation.

Figure 4.1: Dimensions of the T3231 Digital Timer Relay (7.95cm/3.12in length, 4.21cm/1.65in width, 2.78cm/1.09in height)

4.2 نمودارهای سیم کشی

Ensure proper wiring according to the specific voltage and power variant of your T3231 timer relay. Active output means the output directly provides power, so ensure no short circuits and pay attention to safety.

Wiring diagram for AC 110-220V and DC 12V T3231 Timer Relay — Figure 4.2: General Wiring Diagram for AC 110-220V and DC 12V models. For AC, connect Input Fire Wire (L) and Input Zero Wire (N) to power supply, and Output Fire Wire (L) and Output Zero Wire (N) to load. For DC, connect Input Positive (+) and Input Negative (-) to power supply, and Output Positive (+) and Output Negative (-) to load.

4.2.1 DC 12V 240W Wiring

Wiring diagram for T3231 DC 12V 240W Timer Relay — Figure 4.2.1: T3231 DC 12V 240W Wiring. Input: Positive (+), Negative (-). Output: Positive (+), Negative (-). Maximum load current: 20A.

4.2.2 DC 24V 480W Wiring

Wiring diagram for T3231 DC 24V 480W Timer Relay — Figure 4.2.2: T3231 DC 24V 480W Wiring. Input: Positive (+), Negative (-). Output: Positive (+), Negative (-). Maximum load current: 20A. Product certification: CE.

4.2.3 AC 110-220V 1500W Wiring

Wiring diagram for T3231 AC 110-220V 1500W Timer Relay — Figure 4.2.3: T3231 AC 110-220V 1500W Wiring. Input: Fire Wire (L), Zero Wire (N). Output: Fire Wire (L), Zero Wire (N). Maximum load: 1500W.

4.2.4 AC 110-220V 2200W Wiring

Wiring diagram for T3231 AC 110-220V 2200W Timer Relay — Figure 4.2.4: T3231 AC 110-220V 2200W Wiring. Input: Fire Wire (L), Zero Wire (N). Output: Fire Wire (L), Zero Wire (N). Maximum load current: 10A.

5. دستورالعمل های عملیاتی

The T3231 timer relay features a dual LED display and touch buttons for setting parameters. The red display typically shows the 'ON' time, and the blue display shows the 'OFF' time or other parameters depending on the mode.

5.1 Basic Setting Procedure

A visual guide for setting the timer is available in the video below. The general steps involve entering the setting mode, switching between code options, and adjusting parameters.

Video 5.1: T3231 Controller Setting Tutorial. This video demonstrates how to enter the code setting mode by long-pressing the 'S' button, switch between code options (P0, P1, P2, etc.) by single-clicking 'S', and adjust parameters using the up/down arrows. It also shows how to set the ON/OFF times.

5.1.1 Entering Code Setting Mode

Long-press the 'S' button for 6 seconds to enter the code setting menu. The display will show 'P0'.

5.1.2 Switching Code Options

Single-click the 'S' button to switch between different code options (P0, P1, P2, P3, P4, P5).

5.1.3 تنظیم پارامترها

While a code option is displayed, use the 'Up' (▲) or 'Down' (▼) buttons to adjust its parameter value.
Single-click 'S' to save the adjusted parameter and move to the next setting, or single-click 'R' to exit without saving.

5.1.4 Setting ON/OFF Times

Double-click the 'S' button to enter the ON/OFF time setting mode.
Use the 'Up' (▲) or 'Down' (▼) buttons to adjust the ON time (red display).
Single-click 'S' to switch to the OFF time setting (blue display).
Use the 'Up' (▲) or 'Down' (▼) buttons to adjust the OFF time.
Single-click 'S' to save and exit the time settings.

5.2 حالت کار

The T3231 supports various working modes, including:

حالت تایمر: Set a single ON or OFF delay.
حالت چرخه: Repeats ON/OFF cycles for a set number of times (1-999 adjustable cycles).
Period Working Mode: Specific ON/OFF periods.
Infinite Cycle: Continuous ON/OFF cycling.

به طور کامل مراجعه کنید راهنمای کاربر (PDF) for detailed instructions on configuring each working mode and parameter codes.

6. تعمیر و نگهداری

To ensure the longevity and reliable operation of your T3231 Digital Timer Relay, follow these general maintenance guidelines:

دستگاه را تمیز و عاری از گرد و غبار و رطوبت نگه دارید.
از قرار دادن دستگاه در معرض دمای شدید یا نور مستقیم خورشید خودداری کنید.
اتصالات سیم‌کشی را مرتباً بررسی کنید تا از ایمن بودن و عدم وجود خوردگی آنها اطمینان حاصل شود.
Do not attempt to open or repair the device yourself, as this may void the warranty and pose safety risks.

7 عیب یابی

If you encounter issues with your T3231 Digital Timer Relay, consider the following basic troubleshooting steps:

بدون برق/نمایشگر: Check the power supply connections and ensure the correct voltage اعمال می شود.
زمان بندی نادرست: Verify that the timing parameters (ON/OFF times, timing unit) are set correctly according to your desired operation.
خروجی فعال نمی‌شود: Check the load connections and ensure the load is within the specified power limits. Confirm the relay type (normally open) is suitable for your application.
دکمه های بدون پاسخ: Ensure the buttons are not stuck and are clean.

For more complex issues, consult the detailed راهنمای کاربر (PDF) یا با پشتیبانی مشتری تماس بگیرید.

8. نکات کاربر

در حالی که هیچ کاربر خاصی دوبارهviews or Q&A were provided, here are some general tips for using programmable timer relays:

Always double-check your wiring before applying power to prevent damage to the device or connected equipment.
Familiarize yourself with the different working modes to select the most appropriate one for your application.
Test your programmed settings with a non-critical load first to ensure correct operation before connecting to sensitive equipment.
Keep a record of your programmed settings for easy reference, especially if you frequently change modes or times.

9. گارانتی و پشتیبانی

For information regarding product warranty, technical support, or service inquiries, please refer to the official product documentation or contact the seller directly. Keep your purchase receipt as proof of purchase.

	Gaqqee XY8030S & XY12530S CNC DC Adjustable Power Supply with MPPT and Communication با جزئیات بیشترview of Gaqqee CNC DC adjustable power supplies (XY8030S, XY12530S) featuring MPPT solar charging, CC/CV/CW modes, extensive protection, customizable display, and advanced communication capabilities. Ideal for laboratory, industrial, and advanced hobbyist applications.
	GC06 Recordable Sound Module - MP3 WAV Voice Player for DIY Projects Discover the GC06 Recordable Sound Module, a versatile 4MB MP3/WAV voice player designed for DIY greeting cards, gifts, and toys. This module features button control, multiple playback modes, a Type-C interface for easy audio download, and a compact design.
	LCR-TC1 Multi-function Tester: Features, Specifications, and User Guide Comprehensive guide to the LCR-TC1 Multi-function Tester, covering its features, performance parameters, component testing capabilities, IR decoding, calibration, and troubleshooting. Ideal for electronics hobbyists and professionals.
	BM730 Voltage, Current, and Power Meter with Audible Alarm User Guide Detailed guide for the BM730 digital voltmeter, ammeter, and wattmeter. Covers technical parameters, physical display, wiring methods, setting configurations, and mounting hole dimensions for this versatile power meter.
	Gaqqee T3231 Controller Digital Cycle Timer Relay Module Specifications Detailed specifications for the Gaqqee T3231 Controller, a digital cycle timer relay module featuring an extensive time range, dual LED display, multiple operating modes, and selectable voltage options. Includes product features, technical specifications, and packing list.
	AC6926 Bluetooth 5.0 MP3 Decoder Board Amplifier - Features, Specifications, and Wiring با جزئیات بیشترview of the AC6926 Bluetooth 5.0 MP3 decoder board amplifier, including its features, supported formats, connectivity options (USB, TF, FM, AUX, Bluetooth), power requirements, and wiring instructions. This document provides technical specifications and operational guidance for the Gaqqee AC6926 audio module.