HOTRC HT-10A 10-Channel 2.4G Transmitter with F10A Receiver User Manual

1. مقدمه

The HOTRC HT-10A is a sophisticated 10-channel 2.4G remote control system designed for various RC models, including airplanes, cars, ships, and FPV racing drones. It features a 1.7-inch color screen for real-time data display, a robust FHSS frequency hopping algorithm for interference-free operation, and a standard F-10A receiver with voltage feedback capabilities. This manual provides essential information for setting up, operating, and maintaining your HT-10A system.

2. محتویات بسته

لطفاً بررسی کنید که همه اقلام در بسته شما موجود باشد:

• HT-10A Remote Control Transmitter
• F-10A Receiver
• بازخورد جلدtage سیم
• راهنمای دستورالعمل (این سند)
• (Optional: Packaging Box)

3. راهنمای راه اندازی

۲.۱ منبع تغذیه فرستنده

The HT-10A transmitter supports two power supply methods:

• 2S Lithium Battery (7.4V): The remote control has a reserved 2S socket for direct insertion of a 2S lithium battery.
• چهار باتری قلمی: Insert four standard AA batteries into the battery compartment.

توجه: باتری‌ها شامل نمی‌شوند و باید جداگانه خریداری شوند.

3.2 Receiver Connection (F-10A)

The F-10A receiver is a 10-channel receiver with a voltage return function. Connect it to your model's Electronic Speed Controller (ESC) and battery as shown in the diagram below. The receiver also includes a dedicated feedback line and voltage feedback interface for monitoring battery voltage and receiver signal.

The alarm voltage for the return function can be configured via the remote control's settings.

۳.۳ اتصال فرستنده و گیرنده

To establish communication between the HT-10A transmitter and the F-10A receiver, a binding process is required. The F-10A receiver features a "BIND" button (code matching button).

1. مطمئن شوید که هم فرستنده و هم گیرنده خاموش هستند.
2. Connect the receiver to its power source (e.g., ESC or separate battery).
3. Press and hold the "BIND" button on the F-10A receiver while powering it on. The receiver's LED should start flashing, indicating it's in binding mode.
4. Power on the HT-10A transmitter. Navigate to the "Pairing" menu option on the transmitter's screen (refer to Section 4.2 for screen navigation).
5. Initiate the pairing process from the transmitter.
6. Once successfully bound, the receiver's LED will turn solid, and the transmitter's screen will display connected status.
7. برای تأیید اتصال، فرستنده و گیرنده را روشن/خاموش کنید.

The system utilizes a FHSS (Frequency Hopping Spread Spectrum) algorithm, allowing multiple users to operate simultaneously without interference.

4. دستورالعمل های عملیاتی

4.1 Transmitter Controls Overview

The HT-10A transmitter features a comprehensive set of controls for precise model operation:

• آنتن ها: For 2.4G signal transmission.
• جوی استیک: Primary control for model movement (e.g., throttle, rudder, aileron, elevator).
• VRA, VRB: Rotary switches, typically used for proportional control of auxiliary channels.
• SWA, SWB, SWC, SWD: Two-position and three-position switches for various functions (e.g., flight modes, gear, flaps).
• Fine-tuning buttons: Adjust trim for each channel.
• کلید برق: Turns the transmitter on/off.
• Up/Down/OK/Back keys: Navigate through the 1.7-inch color screen menu.

4.2 1.7-inch Color Screen Interface

The intuitive UI interface provides real-time feedback and allows for system configuration. The main screen displays critical information:

• RX-V (Return Voltage): Displays the receiver's battery voltage.
• RSSI (Return Signal): Indicates the strength of the signal received by the model.
• TX-V (Remote Control): Shows the transmitter's battery voltage.
• Channel Parameters (CH1-CH10): Real-time values for each channel.
• شاخص ها: PPM signal, Mixed control, Gyroscope status, Function lock, Cruise control function.

4.3 Menu Navigation and Advanced Functions

Use the Up, Down, OK, and Back keys to navigate the menu. The HT-10A offers a variety of programmable functions:

• Turn / Fine Tuning / CH Defin: Adjust channel endpoints, sub-trims, and define channel assignments.
• ESC Set / Mixed Set: Configure Electronic Speed Controller settings and set up custom mixing functions.
• Wireless Set / Smart Device: Manage wireless settings and potentially connect to smart devices (if supported).
• Fail Safe: Program fail-safe positions for all channels in case of signal loss.
• Joystick / System: Calibrate joysticks and access general system settings.
• محدوده: Adjust control range for specific channels.
• جفت شدن: Initiate the binding process with a receiver.
• Postback: Configure voltage return settings, including battery type, voltage alarm, and current parameters.
• Servos / Gyro: Adjust servo directions, speeds, and configure gyroscope settings (if applicable to the receiver and model).
• SystemConf / DisplayConf: General system configuration and display settings (e.g., LED brightness, sleep time).
• Rudder / D/R & Expo: Adjust rudder settings and Dual Rate/Exponential for control sensitivity.

The system also supports Chinese and English interfaces, analog training mode, function locking, and auto shutdown for power saving.

5. تعمیر و نگهداری

• تمیز کردن: Use a soft, dry cloth to clean the transmitter and receiver. Avoid using solvents or abrasive cleaners.
• ذخیره سازی: Store the remote control system in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• مراقبت از باتری: Ensure proper battery polarity when inserting. Do not mix old and new batteries or different types of batteries.
• به روزرسانی های میان افزار: مشخصات سازنده را بررسی کنید webبرای هرگونه به‌روزرسانی میان‌افزار موجود برای بهبود عملکرد یا ویژگی‌های جدید، به‌طور دوره‌ای به سایت مراجعه کنید.

6 عیب یابی

• بدون قدرت:
  • بررسی کنید که آیا باتری‌ها به درستی وارد شده و شارژ شده‌اند یا خیر.
  • مطمئن شوید که کلید برق در وضعیت "روشن" (ON) قرار دارد.
• No Signal / Loss of Control:
  • Verify that the transmitter and receiver are properly bound (refer to Section 3.3).
  • Check the distance between the transmitter and receiver; ensure it's within the specified range.
  • Ensure there are no major obstructions or sources of 2.4GHz interference in the operating area.
  • Check the RSSI value on the transmitter screen for signal strength.
  • Confirm that the receiver's fail-safe settings are correctly configured.
• Incorrect Control Response:
  • Check channel assignments and mixing settings in the transmitter menu.
  • Verify servo connections to the receiver.
  • Recalibrate joysticks if control feels erratic.
• Screen Not Displaying Correctly:
  • Restart the transmitter.
  • Check display settings in the `DisplayConf` menu.

7. مشخصات

7.1 HT-10A Transmitter

7.2 F-10A Receiver

*Note: The actual receiving distance may vary depending on the usage environment.

8. نکات کاربر

• Always perform a range check before flying or operating your model to ensure reliable control.
• Familiarize yourself with the fail-safe settings and configure them appropriately for your model to prevent runaway situations.
• Regularly monitor the TX-V (transmitter voltage) and RX-V (receiver voltage) on the screen to avoid unexpected power loss during operation.
• Experiment with the fine-tuning buttons and D/R & Expo settings to customize control sensitivity to your preference and model type.
• For aircraft models, remember that the F-10A receiver does not have a built-in gyroscope, so external stabilization might be required if desired.

9. گارانتی و پشتیبانی

For any technical assistance, warranty claims, or further inquiries regarding your HOTRC HT-10A system, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.