1. مقدمه
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of the Samsung Washing Machine PCB Control Panel Display Board (Models DC92-00248E, DC41-00104B). This component is a critical replacement part designed to restore the full functionality of your Samsung drum washing machine's control and display interface. Please read this manual thoroughly before attempting any installation or repair.
2. اطلاعات ایمنی
هشدار: خطر برق گرفتگی
- Always disconnect the washing machine from the main power supply before attempting any installation, repair, or maintenance.
- Only qualified technicians or individuals with appropriate electrical knowledge should attempt to replace this component.
- Wear appropriate personal protective equipment (PPE), including insulated gloves, during installation.
- Ensure all connections are secure and correctly made before restoring power to the appliance.
- Do not operate the washing machine if the control board or any electrical component is damaged or exposed to moisture.
3. محصول تمام شدview
The PCB Control Panel Display Board is the central interface for controlling and monitoring your Samsung drum washing machine. It integrates the electronic circuitry for program selection, cycle timing, and displaying operational status and error codes.
4. راه اندازی و نصب
This control board is a direct replacement part. Proper installation is crucial for the safe and correct functioning of your washing machine. It is highly recommended that installation be performed by a certified appliance technician.
- قطع برق: ماشین لباسشویی را از پریز برق جدا کنید.
- پنل کنترل دسترسی: Depending on your specific Samsung washing machine model, you may need to remove the top panel or front fascia to access the existing control board. Refer to your washing machine's service manual for exact instructions.
- اتصالات سند: Before disconnecting any wires, take clear photos of all wiring connections to the old PCB. Note the position and color of each wire.
- برد قدیمی را جدا کنید: با دقت تمام سیمکشیها و پیچهای نصب شده که برد کنترل قدیمی را محکم میکنند، جدا کنید.
- نصب برد جدید: Position the new PCB Control Panel Display Board in the same location as the old one. Secure it with the appropriate screws.
- سیمکشی را دوباره وصل کنید: Using your documented photos, carefully reconnect all wiring harnesses to the new board. Ensure each connector is firmly seated.
- دستگاه را دوباره سرهم کنید: Reattach any panels or fascia removed during the process.
- عملکرد تست: Plug the washing machine back into the power outlet. Perform a test cycle to ensure all functions (power, display, program selection, water fill, spin, etc.) are working correctly.
5. دستورالعمل های عملیاتی
This PCB Control Panel Display Board enables the operation of your Samsung washing machine. Once installed, operate your washing machine according to its original user manual. The board facilitates the following core functions:
- روشن/خاموش برق
- Program Selection (e.g., Cotton, Synthetics, Delicates)
- Cycle Start/Pause
- Display of remaining time, error codes, and selected options
- Adjustment of temperature, spin speed, and rinse cycles
If the washing machine does not respond as expected after installation, refer to the Troubleshooting section.
6. تعمیر و نگهداری
The PCB Control Panel Display Board is a sealed electronic component and generally requires no routine maintenance. To ensure its longevity and proper function:
- Keep the washing machine's control panel clean and dry. Avoid using abrasive cleaners or excessive moisture.
- Protect the washing machine from extreme temperatures and humidity.
- Ensure the washing machine is properly grounded to prevent electrical surges.
7 عیب یابی
If you encounter issues after installing the new control board, consider the following:
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| Washing machine does not power on | اتصال برق شل، پریز معیوب، سیمکشی نادرست. | Check power cord, test outlet, re-verify all wiring connections to the PCB. |
| Display is blank or shows incorrect characters | Loose display ribbon cable, faulty display component. | Ensure display ribbon cable is securely connected. If issue persists, the display component may be faulty. |
| دکمه ها پاسخگو نیستند | Loose button connections, faulty buttons. | Check connections to the button array. Ensure no debris is obstructing buttons. |
| Washing machine displays an error code | Specific appliance fault. | Refer to your washing machine's original user manual for the meaning of the error code and recommended solutions. |
اگر مراحل عیبیابی مشکل را حل نکرد، با یک تکنسین خدمات واجد شرایط تماس بگیرید.
8. مشخصات
| ویژگی | جزئیات |
|---|---|
| شماره مدل | DC92-00248E, DC41-00104B |
| مواد | کامپوزیت |
| ضخامت | 0.6 میلی متر |
| تایپ کنید | روکش |
| شکل | I |
| مبدا | سرزمین اصلی چین |
| ماده شیمیایی با نگرانی بالا | هیچ کدام |
| سفارشی سازی | خیر |
| وزن بسته بندی | 1.0 کیلوگرم |
| ابعاد بسته (L x W x H) | 20 × 20 × 15 سانتی متر |
9. نکات کاربر
- Always double-check model compatibility before purchasing a replacement part.
- When handling the PCB, avoid touching the electronic components directly to prevent static discharge damage.
- Keep the work area clean and well-lit during installation.
10. پشتیبانی
For further assistance or technical inquiries regarding this product, please contact the seller or a qualified appliance repair professional.
