Tuya WiFi Door Access Control System Kits User Manual

1. مقدمه

This manual provides detailed instructions for the installation, operation, and maintenance of your OBO HANDS Tuya WiFi Door Access Control System Kits. This system offers secure and convenient access management through multiple methods, including Tuya APP, RFID cards, and passwords. It is designed for various door types and features an IP68 waterproof rating for outdoor installation.

2. محصول تمام شدview

2.1. اجزا

The OBO HANDS Tuya WiFi Door Access Control System Kits come with various components depending on the selected kit. A typical kit includes:

• Access Controller: The main unit for managing access, featuring a touch screen keypad and WiFi connectivity.
• منبع تغذیه: A DC12V/3A power switch for the access control system.
• Door Exit Button: For convenient exit from the secured area.
• RFID Keyfobs: 13.56MHz RFID cards for access.
• زنگ درب: A wired doorbell for visitor notification.
• Electric Lock (Optional, depending on kit): Various types such as Electric Strike Lock, Electric Drop Bolt Lock, 180KG Electric Magnetic Lock, or Embedded Magnetic Lock.
• Brackets (Optional, depending on lock and door type): L, U, or ZL brackets for magnetic locks.

2.2. ویژگی های کلیدی

• روش‌های متعدد باز کردن قفل: Supports WiFi Tuya APP, RFID Card, Password, and a combination of RFID Card + Password.
• High User Capacity: Stores up to 10,000 users (RFID cards and passwords).
• IP68 ضد آب: Designed for outdoor installation, resistant to rain and storms with full PC glue sealing.
• پنل صفحه لمسی: Modern and responsive touch keypad.
• نور پس زمینه آبی: Ensures visibility of digits in low-light conditions.
• ادغام با اپلیکیشن Tuya: Remote unlock, temporary password generation, user management, and unlock record viewing.
• عملکرد دوربل: Integrated doorbell button for wired doorbell connection.
• Wiegand Signal Output: WG26/34 output for integration with other access control systems.
• حالت عادی باز: Can be configured for frequent entry/exit scenarios.

3. مشخصات

3.1. Access Controller (S20IC TUYA)

3.2. Power Supply (K803A)

3.3. Door Exit Button

• مواد: پلاستیک سخت
• حداکثر امتیاز قدرت: 36V DC 3A—5A output
• Support Modes: NC Mode (Fail Safe) & NO Mode (Fail Secure)
• ابعاد: 86 x 86mm (L/W)

3.4. RFID Keyfobs

• فرکانس: 13.56 مگاهرتز
• محدوده تشخیص: 0-5 سانتی متر
• ویژگی: Each card pre-programmed and includes a metal keyring.

3.5. Electric Locks (Kit-dependent)

Specifications vary by lock type. Please refer to your specific kit for details.

4. راه اندازی و نصب

4.1. General Installation Considerations

• The access controller is IP68 waterproof and can be installed outdoors.
• قبل از شروع نصب، مطمئن شوید که تمام برق قطع شده است.
• Choose the appropriate lock and bracket type based on your door material and opening direction.

4.2. نمودار سیم کشی

Connect the access control keypad, electric lock, door exit button, and door bell to the DC12V power supply according to the diagram below. Then, connect the DC12V power supply to your AC110-260V power source.

4.3. Tuya APP Setup Instructions

1. Download Tuya APP: Scan the QR code provided in the product packaging or search for "TuyaSmart" in your device's App Store (iOS) or Google Play Store (Android).
2. Initiate Pairing on Access Controller: On the access control machine, enter *123456#041#. Wait for 5 seconds for the indicator light to flash, signaling that the device is ready for pairing via WiFi.
3. Add New Equipment in Tuya APP: Open the Tuya APP on your mobile phone and select the option to add new equipment.
4. نوع دستگاه را انتخاب کنید: Choose "Camera & Lock", then click "Lock(Wi-Fi)".
5. اتصال به وای فای: The app will prompt you to connect with available devices. Select your 2.4GHz Wi-Fi network and enter the password.
6. نشانگر تأیید: Confirm that the device indicator light is flashing as instructed by the app, then click "Done".
7. حالت AP را انتخاب کنید: Choose "AP Mode" for connection.
8. Connect Mobile WiFi to Device Hotspot: Connect your mobile phone's Wi-Fi to the device's hotspot (e.g., "SmartLife-XXXX").
9. اتصال کامل: The app will show "Connecting" and then "Added successfully". Click "Done".
10. Open Remote Unlock Setting: Navigate to the settings within the Tuya APP and enable the remote unlock feature.

4.4. Lock and Bracket Installation (Kit-dependent)

The installation of the electric lock and any necessary brackets depends on the specific kit purchased and your door type. Refer to the diagrams below for common configurations:

• Kit 2 (without Lock): Includes access control keypad, power supply, exit button, doorbell, and RFID key cards.

• Kit 3 (Electric Strike Lock): Suitable for wooden and metal doors. No bracket needed.

• Kit 4 (Electric Drop Bolt Lock): Suitable for wooden, metal, and stainless steel doors. No bracket needed.

• Kit 5 (180KG Electric Magnetic Lock): Suitable for wooden, metal, and glass frame doors. No bracket needed.

• Kit 6 (180KG Magnetic Lock + U bracket): Suitable for frameless glass doors.

• Kit 7 (180KG Magnetic Lock + L bracket): Suitable for wooden and metal doors where the door is flat or the gap to the door frame is less than 3cm (viewed from indoor).

• Kit 8 (180KG Magnetic Lock + ZL bracket): Suitable for wooden, metal, and glass doors that open inwards.

• Kit 9 (Embedded 180KG Electric Magnetic Lock): Suitable for wooden, metal, and glass frame doors. No bracket needed.

5. دستورالعمل های عملیاتی

5.1. روش های باز کردن قفل

The system offers several ways to unlock the door:

• Tuya APP Remote Unlock: Open the Tuya APP, navigate to the access control interface, and hold/press the unlock icon to open the door remotely.
• رمز عبور موقت: Generate a temporary password through the Tuya APP. These passwords are valid for 6 hours and can be used once. They can be shared via WeChat, Email, or SMS.
• کارت RFID: Present a registered RFID card to the card reading area on the access controller. The system supports up to 10,000 RFID cards.
• رمز عبور: Enter a registered password on the touch keypad. The system supports up to 10,000 passwords.
• RFID Card + Password: For enhanced security, combine an RFID card swipe with a password entry.
• Door Exit Button: Press the physical exit button installed on the inside of the door to unlock and exit.
• کنترل از راه دور (اختیاری): If a remote control is part of your kit, press the unlock button on the remote.

5.2. Tuya APP Functions

• Add Users/Cards: Within the Tuya APP, you can easily add new passwords and RFID cards.
• View باز کردن قفل رکوردها: برنامه به شما این امکان را می‌دهد که view a log of the latest lock opening information.
• Set Normally Open Mode: For situations requiring frequent entry and exit, you can set the system to a normally open mode via the APP.

5.3. عملکرد زنگ در

Press the doorbell button on the access controller to activate the connected wired doorbell.

6. تعمیر و نگهداری

• تمیز کردن: Regularly wipe the access controller's touch screen and body with a soft, damp پارچه. از پاک‌کننده‌ها یا حلال‌های ساینده خودداری کنید.
• بررسی اتصال: به طور دوره‌ای تمام اتصالات سیم‌کشی را بررسی کنید تا از ایمن بودن و عدم وجود خوردگی آنها اطمینان حاصل شود.
• به روز رسانی نرم افزار: Keep your Tuya APP updated to the latest version for optimal performance and security features.
• یکپارچگی ضد آب: While IP68 rated, avoid directly spraying high-pressure water onto the unit. Ensure the back cover is securely fastened after any internal inspection.

7 عیب یابی

• سیستم پاسخگو نیست: Check the power supply connections. Ensure the power supply is receiving AC input and providing DC12V output.
• RFID Card Not Working: Verify that the RFID card is correctly programmed into the system via the Tuya APP or direct programming. Ensure the card is held within the 0-5cm detection range.
• رمز عبور کار نمی‌کند: Double-check the entered password for accuracy. Ensure the password has been correctly added and is active.
• Tuya APP Connectivity Issues: Ensure your Wi-Fi network is 2.4GHz. Verify that the access controller is properly paired with the Tuya APP following the setup instructions. Check your phone's internet connection.
• Lock Not Unlocking: Confirm that the lock type (NC/NO) matches the power supply's output mode. Check all wiring connections between the access controller, power supply, and lock.
• Doorbell Not Sounding: Check the wiring connection of the doorbell to the access controller. Ensure the doorbell itself is functional.

8. نکات کاربر

• RFID Card Compatibility: The system operates at 125KHz and 13.56MHz frequencies. When purchasing additional RFID cards, ensure they are compatible with these frequencies.
• Flexible Unlocking: Utilize the various unlocking modes (APP, password, RFID card, or combinations) to suit different user needs and security preferences.
• دسترسی موقت: For guests or service personnel, leverage the temporary password feature in the Tuya APP for time-limited access without compromising your main security codes.
• Door Type Selection: When choosing a kit, consider your door material (wooden, metal, glass) and opening direction (inward, outward, frameless) to ensure you select the correct lock and bracket combination for optimal performance.

9. گارانتی و پشتیبانی

برای اطلاعات مربوط به گارانتی، پشتیبانی فنی یا سوالات مربوط به خدمات، لطفاً مستقیماً با فروشنده یا سازنده تماس بگیرید. رسید خرید خود را به عنوان مدرک خرید نگه دارید.