دفترچه راهنمای موتور برس غلتکی اصلی جاروبرقی رباتیک Ecovacs DEEBOT

1. محصول تمام شدview

This manual provides instructions for the installation, operation, maintenance, and troubleshooting of the replacement main roller brush motor for various Ecovacs DEEBOT robotic vacuum cleaner models. This motor is a crucial component responsible for driving the main cleaning brush, ensuring effective debris collection.

محتویات بسته:

• 1x Middle brush motor

Please inspect the motor upon receipt to ensure there is no visible damage.

2. راهنمای نصب

Replacing the main roller brush motor requires careful handling. Always ensure the robotic vacuum cleaner is powered off and disconnected from its charging base before beginning any maintenance or replacement procedures.

اقدامات احتیاطی ایمنی:

• Ensure the robot is completely powered off and unplugged.
• Use appropriate tools to avoid damaging the robot's casing یا اجزای داخلی.
• قطعات کوچک را از کودکان دور نگه دارید.

نصب گام به گام:

1. آماده سازی ربات: Turn the Ecovacs DEEBOT robotic vacuum cleaner upside down on a clean, flat surface.
2. Remove the Main Brush Cover: Locate the main brush compartment, usually secured by latches or screws. Open or unscrew the cover to expose the main brush and its assembly.
3. Remove the Main Brush: Carefully lift out the main roller brush.
4. دسترسی به موتور: Depending on your specific DEEBOT model, you may need to remove additional screws or panels to access the main brush motor. Refer to your vacuum's original user manual for precise disassembly instructions.
5. موتور قدیمی را جدا کنید: Gently disconnect the wiring harness from the old motor. Note the orientation of the wires (e.g., red to red, black to black) if not clearly color-coded or keyed.
6. موتور قدیمی را بردارید: Unscrew or unclip the old motor from its housing.
7. نصب موتور جدید: Place the new main roller brush motor into position. Ensure it fits securely.
8. 

   شکل 1: بالا view of the main roller brush motor showing the white gear and wiring connection.
9. اتصال سیم کشی: Connect the wiring harness to the new motor. Ensure a firm connection.
10. 

    شکل 2: سمت view of the main roller brush motor with black housing and connected wires.

11. مونتاژ مجدد: Reattach any panels or covers that were removed. Replace the main brush and secure its cover.
12. 

    شکل ۲: زاویه‌دار view of the main roller brush motor, highlighting the black housing and connection point.

13. عملکرد تست: Place the robot back on its wheels, power it on, and initiate a cleaning cycle to ensure the main brush spins correctly and without unusual noise.

3. Operating the Motor

The main roller brush motor operates automatically as part of your Ecovacs DEEBOT's cleaning cycle. Once correctly installed, it will engage when the vacuum is performing its cleaning tasks, rotating the main brush to sweep debris into the dustbin.

No direct user interaction is required for the motor's operation after installation.

4. تعمیر و نگهداری

Proper maintenance of the main brush area can extend the life of your motor and ensure optimal cleaning performance.

تعمیر و نگهداری توصیه شده:

• تمیز کردن منظم قلم مو: Periodically remove the main roller brush and clean any tangled hair, fibers, or debris. Excessive entanglement can put strain on the motor.
• Inspect Brush Bearings: Check the ends of the main brush for any debris accumulation around the bearings, which can impede smooth rotation.
• حذف گرد و غبار: Use a soft brush or compressed air to gently remove dust and debris from the motor area if accessible, ensuring not to damage any wiring.
• اجتناب از رطوبت: Keep the motor and surrounding components dry. Moisture can cause electrical damage.

5 عیب یابی

If you encounter issues after replacing the main roller brush motor, consider the following troubleshooting steps:

مسائل و راه حل های رایج:

• Main Brush Not Spinning:
  • بررسی سیم کشی: Ensure the motor's wiring harness is securely connected.
  • رفع موانع: Remove the main brush and check for any debris, hair, or foreign objects that might be jamming the brush or motor mechanism.
  • تأیید نصب: Double-check that the motor is correctly seated in its housing and all components are reassembled properly.
• صدای غیرمعمول از ناحیه برس:
  • برس را بررسی کنید: Remove and clean the main brush thoroughly. Check for damaged bristles or end caps.
  • Check Motor Seating: Ensure the motor is firmly secured and not vibrating loose.
  • اشیاء خارجی: Listen carefully for any small objects that might have fallen into the brush compartment during reassembly.
• Robot Displays Error Related to Main Brush:
  • Restart Robot: Power off the robot completely, wait a few minutes, then power it back on.
  • Consult DEEBOT Manual: Refer to your specific Ecovacs DEEBOT model's user manual for error code definitions and solutions.

If problems persist after these steps, contact customer support for further assistance.

6. مشخصات

7. نکات کاربر

• تمیز کردن منظم کلید اصلی است: To maximize the lifespan of your main brush motor, make it a habit to regularly clean the main brush and its compartment. This prevents debris from accumulating and causing undue stress on the motor.
• برخورد ملایم: When installing or removing the motor, apply gentle pressure. Avoid forcing components, as this can lead to damage to the motor or the vacuum cleaner itself.
• بررسی سازگاری: Always double-check that the replacement motor is compatible with your specific Ecovacs DEEBOT model before attempting installation.

8. گارانتی و پشتیبانی

For any questions regarding the product, installation, or troubleshooting that cannot be resolved using this manual, please contact the seller directly for support. Keep your purchase records handy when seeking assistance.