expert4house IR02 V1 WiFi Smart Home Sensors Instructions
Product Configuration
Specifications
Power Supply: USB 5V/1A
Infrared Frequency: 38-56Khz
Infrared Distance: 7M
Infrared Angle: 360°
Max Current: 110mA
Max Power: 0.55W
Wireless Type: 2.4GHz
Wireless Standard: IEEE 802.11b/g/n
Wireless Range: 45M
Operating Temperature: 0℃～40℃ (32°F～104°F)
Operating Humidity: 20% ～85%
Storage Temperature: 0℃～60℃ (32°F～140°F)
Storage Humidity: 0%～90%
Size: 60mm x 60mm x 20mm
Support: Amazon Echo, TMALL GENIE, Rokid
LED State
| Device Status | LED State |
| Smart Wi-Fi | Indicator flashes quickly |
| AP mode | Indicator flashes slowly |
| Remote control | Indicator flashes one time |
| Standby | Indicator OFF |
| Reset/Switch to
adding staus |
Long press reset button for 5-7s |
How to reset?
- Press the reset button for 6 seconds till the indicator flash Then device turns to smart wifi mode.
- Press the reset button again for 6 seconds till the indicator flash slowly. The device turns to AP mode.
Get Started with Tuya Smart App
- Download APP
Download the “Smart life” app from APP Store or Google Play to your mobile.
- Register and Login
Launch the “Smart life” app.
To register,enter your mobile phone number or email address,create a password ,then login to the app.
Login if you have an account already.
- Add Device
Power on the smart sensor which default’s mode is
Smart WiFi mode.
Select the “+” symbol on the top right-hand corner. Select your product type and follow the instructions of the app.
If the connecting fails,try using AP Mode
On the “Add device” page select “AP Mode” on the top right-hand corner and follow the instructions of the app. Finally,have fun!
What’s the App User Interface Like ?
Experience Advanced Features
You can experience the various advanced features of the product with the app, just try and do it yourself.
Main fuction
- Add Remote Control: Click “Add Remote Control”, select adevice type and follow the instructions of the app.
- Learning function (DIY): keep close enough between the sensor and the device you want to control.
Linkage alarm setting
- To connect two Sensors via scene setting.
Device sharing
- Allow others to control the device
Push motivation
- Open/close push motivation
Remove device
- Restore default settings; Delete and add the device again to clear the record by APP.
Read More About This Manual & Download PDF:
Documents / Resources
 |
expert4house IR02 V1 WiFi Smart Home Sensors [pdf] Instructions IR02 V1, WiFi Smart Home Sensors, IR02 V1 WiFi Smart Home Sensors |
