EXIT TOYS MB200 GetSet Climbing Wall

Product Information

The product is called GetSet Climbing Wall MB and its model number is MG-912-V01. It includes M8, M10 screws of various sizes, and other accessories such as st3.5x25mm screws and 61.81.90.20.

Product Usage Instructions

1. Identify the parts labeled A, B, C, D in the instruction manual.
2. Use the M8x35mm screws (2X) to attach part A to part B.
3. Attach part C to part B using the following screws: M8x40mm (2X), M8x45mm (24X), M8x50mm (10X).
4. Use M8 screws (48X) to attach part D to part C.
5. Attach 61.90.20.00 (1X), 61.90.20.10 (1X), 61.90.20.20 (1X), and 61.90.20.30 (1X) to part C.
6. Use M8x35mm screws (12X) to attach 61.90.20.40 (1X) to part C.
7. Attach 54.90.20.10 (1X) and 61.90.46.00 (10X) to part C.
8. Use M8x45mm screws (13X) to attach part D to part B.
9. Use M8x35mm screws (4X) to attach part B to part A.
10. Attach st3.5x25mm screws (10X) and M10 screws (10X) to part C.
11. Use M8x35mm screws (4X) to attach part B to part A.
12. Use M8x45mm screws (4X) to attach part B to part C.
13. Attach 61.90.46.10 (1X) to part C.
14. Use M8x35mm screws (4X) to attach part B to part A.
15. Attach M10x35mm screws (12X) and M10 screws (10X) to part C.
16. Attach M8x40mm screws (8X) to the climbing wall.
17. Attach the assembled parts A, B, C, and D to the climbing wall using M8x35mm screws (2X), M8x50mm screws (6X), M8x35mm screws (2X), and M8x45mm screws (5X).
18. Use 61.81.90.20 (1X) to complete the assembly process.

OVERVIER

PARTS

TOOLS

INSTALLATION

Contact Information:

• ADDRESS: Dutch Toys Group B.V. Edisonstroat 83 7006 RB Doetinchem, The Netherlands
• EMAIL: info@exittoys.com
• WEB: www.exittovs.com

Documents / Resources

EXIT TOYS MB200 GetSet Climbing Wall [pdf] Instruction Manual MB200, MB300, MB200 GetSet Climbing Wall, GetSet Climbing Wall, Climbing Wall

References

• User Manual