Exir Broadcasting WR2300-CAL-TRL-x Wave TRL Calibration Kit
PRODUCT FEATURES
- High-quality low-loss aluminum alloy
- Can be optimized to custom requirements
- Standards, RS-271-A, RS-261, IEC 60154-2, IEC 60153-1, 2, MIL-DTL-85K, MIL-DTL-3922D
PRODUCT PROFILE
Exir Broadcasting supplies Waveguide lines of different types. Low-loss aluminium alloys are used to ensure high conductivity. Exir Broadcasting waveguides fulfill all general standards. It’s welded in a welding process with no welding in direction of propagation which yield exellent performance and minimises loss. More detailed information is available on request The calibration kit is a Thru Reflect Line (TRL) two port calibration kit. The kit includes 3 standards to define the calibrated reference plane. Precision waveguide to coaxial adapters are used toghether with a short circuit plate and a precision λ/4 waveguide section for the specific calibration frequency spann. This to provide a balanced phase response over the operating frequency range of the waveguide.
Our kits include
- 2 pcs of Waveguide to coaxial (N-type or 7/16) adapter
- 1 pcs of 1/4 Lambda waveguide section.
- 1 pcs of shorting plate
ARTICLE STRUCTURE
Exir Broadcasting
- P +46415301400
- info@exirbroadcasting.com
- www.exirbroadcasting.com
Documents / Resources
 |
Exir Broadcasting WR2300-CAL-TRL-x Wave TRL Calibration Kit [pdf] Owner's Manual WR2300-CAL-TRL-x Wave TRL Calibration Kit, WR2300-CAL-TRL-x, Wave TRL Calibration Kit, Calibration Kit, Kit |