EXFO FIP-200 Connector Checker User Guide
Inspecting Single-Fiber Connectors
Compatible with
When paired with EXFO Exchange, the unit will automatically upload the results via Bluetooth.
5-Bar Ratings
 |
 |
The connector is clean and in perfect condition. |
 |
|
The connector is clean and in good condition. |
 |
|
The connector is in good condition. Try cleaning it to improve its condition. |
 |
 |
Consider replacing the connector after multiple cleaning attempts. |
 |
|
Consider replacing the connector after multiple cleaning attempts. |
Startup / Bluetooth Connection / Inspection
| LEDs | Meaning |
 |
The FIP-200 is starting up. |
 |
New Bluetooth connection: Press the capture button to confirm the connection. |
 |
The FIP-200 is ready to take a capture. |
 |
The autofocus, capture or analysis process is in progress. |
 |
The capture process is complete. You can now remove the inspection tip from the connector. |
Inspection Errors
| LEDs | Meaning |
 |
Autofocus timeout: Clean the connector and ensure the connector/tip is inserted correctly. |
 |
Positioning error: Hold the FIP-200 straight and retry. |
 |
Focus quality error: Hold the FIP-200 steady and retry. |
 |
Hardware error: Contact EXFO Technical Support for assistance. |
EXFO Technical Support:
1866 683-0155 (USA and Canada)
Tel.: 1418 683-5498
support@exfo.com
Scan the QR code to access the support page for more information:
www.exfo.com
QR Code
Documents / Resources
 |
EXFO FIP-200 Connector Checker [pdf] User Guide FIP-200, FIP-200 Connector Checker, Connector Checker, Checker |
