EXCENTR X1 Daily Accu Floor Cleaning Machine User Manual

General safety regulations: The machine is designed to stand upright, resting on its wheels and parking supports.
Hazards to the user: Detailed safety instructions regarding potential hazards to the user.

Hazards to the machine and batteries: Information on potential hazards to the machine and batteries.

Parts Overview
The X1 floor cleaning machine includes components such as brushes, batteries, tanks, and a control panel.

Preparing for Use

Unpacking and Installation: Step-by-step guide on how to unpack and set up the machine.

Package Contents: List of items included in the package.

operation

Cleaning Modes: Explanation of different cleaning modes available on the machine.
Battery Management and Indicators: Information on monitoring and managing battery usage.

Tips for Optimal Use: Recommendations for achieving the best cleaning results.

Cleaning and Maintenance

Daily Cleaning: Instructions for daily cleaning routines.
Periodic Maintenance: Guidelines for periodic maintenance tasks.

Replacing Parts: Steps to follow when replacing components.

Troubleshooting
Guidance on identifying and resolving common issues that may arise during operation.

Technical Specifications
Details on technical specifications including power consumption, dimensions, weight, etc.

Original operating instructions according to annex 1, art.1.7.4. of the Machinery Directive 2006/42/EC.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of EXCENTR B.V. This also applies to any accompanying drawings and diagrams. EXCENTR B.V. reserves the right to change parts at any time, without prior or direct notice to the customer. The contents of this manual are also subject to change without prior warning. For information regarding set-up, maintenance operations, or repairs not provided in this user manual, please contact your supplier’s technical service department. This user manual has been compiled with all possible care, but EXCENTR B.V. cannot accept responsibility for any errors in this user manual or for the consequences thereof.

EC declaration of conformity

Introduction

Congratulations on purchasing your X1 floor cleaning machine, designed to professionally clean and maintain your floors. The machine offers easy operation and superior cleaning results thanks to its integrated advanced technologies. This device meets strict quality and safety standards, ensuring reliability and durability.

Purpose of the manual

This manual provides essential information for using the X1 safely and effectively. By carefully following the guidelines in this manual, you will ensure optimum performance and prolong the life of your machine.

Please read this manual thoroughly before using the machine. This will ensure the safe and efficient operation of the floor-cleaning machine.

Safety regulations

General safety regulations

Read the manual completely before using the machine.
Only use the machine for cleaning floors and only if you are properly instructed. This machine is designed and only to be used by professional users.

Keep the machine out of reach of children and unauthorized persons.
The X1 is splash-proof. Under no circumstances should the X1 be completely submerged in water or sprayed wet with a pressure washer.
Always remove the batteries before carrying out maintenance or cleaning the machine to avoid electric shock.
Only use professional cleaning agents.
The pH values may be between 6-10.
Use only low-foam cleaning agents Using aggressive cleaning agents can damage the machine.
Avoid operating the machine near flammable liquids or gases.
Make sure the machine is put away correctly, this can be done in its parking position. The bracket is put upright then the machine can stand against this. The machine is folded upright. The X1 then rests on its wheels and parking supports.

Hazards to the user

Do not step on the machine during operation to avoid injury.
The X1 contains magnets that could potentially adversely affect medical equipment such as
pacemakers. Use caution when using near such equipment.
The machine should only be operated by adults and professional users.
Always empty the waste water tank after use
Always empty the fresh water tank after use
While rotating brushes or pad holders should not be touched under any circumstances.
Always operate the machine alone.

Hazards to the machine and batteries

Do not use liquids hotter than 45°C in the machine.
Use the machine only at temperatures between 10°C and 45°C.

After use, store the machine in a dry place.
The machine contains magnets that may affect other electronic devices. Be alert when using the machine near sensitive equipment.
Use the recommended charger and always fully charge the batteries.

Make sure the batteries do not become fully discharged to avoid damage.
A battery knows self-discharge, if you leave the battery empty for too long it can cause damage to the battery.
Do not immerse the batteries in water.

The battery can be damaged by falling. This is never covered by the warranty.

Parts overview

The X1 floor cleaning machine is equipped with the following components:

Handle: For easy machine control.
Control buttons: For turning on the machine and selecting the cleaning mode.
Clean water tank: For clean water and cleaning agents.

Dirty water tank: For collecting dirty water during cleaning.
Brushes/pad holders: For effective scrubbing and cleaning of floors.
Batteries: Two replaceable 18V batteries for cordless use.

Battery charger: The machine comes with a dual battery charger
Suction nozzle: For sucking up dirty water after cleaning.
Suction hose: this ensures that dirt from the floor enters the dirty water tank.

Parking position: For safe machine storage.
Light function: For better visibility in dark or poorly lit rooms.

Preparation for use

Unpacking and installation

Remove the machine from its packaging and check that all parts are present.
Fit the bumper to the front of the machine to prevent damage during use. See the instruction sheet for this.
Install the batteries on the battery charger. Connect the battery charger to a grounded outlet to fully charge the batteries.

Fill the fresh water tank with water and add the recommended detergent.
Check that the waste water tank is empty before starting the machine.

Package contents

1x X1 floor cleaning machine
2x 18V X1 batteries

1x double battery charger with EU plug
2x brushes or pad holders
1x suction hose

1x squeegee
1x operating instructions

Operation

Couple the squeegee to the machine and fit the suction hose correctly.

Fit brushes or pad holders with appropriate pads (consult your retailer for advice). Always use the machine with brushes or pad holders fitted with pads
Turn on the machine using the on/off button.
Select the desired cleaning mode and if less water is desired adjust the water level via the drip mark, press once.

Use the machine slowly and move the handle to steer the machine smoothly.
Switch off the machine after use and empty the waste water tank according to local water disposal regulations.

Battery management and indicators

Green: The battery is fully charged and ready for use.
Orange: The battery is partially discharged (30% remaining).

Red: The battery is almost empty (70% discharged) and needs to be replaced or recharged.
Flashing red: The battery is low and the machine will stop soon.
Always charge the battery if the indication is red. Use the charger supplied for this purpose.

Tips for optimal use
Move the machine slowly across the floor to achieve the best cleaning results. For stubborn stains, let the machine scrub in the same spot for some time. Make sure the brushes or pads are checked regularly for wear to avoid damage to the floor.

Cleaning and maintenance

Daily cleaning

Empty and rinse the holding tank after each use.
Clean the brushes and squeegee to ensure optimal performance.

Check the filters and clean them if necessary.

Periodic maintenance

Clean the fresh water tank and replace the filters regularly to check if they are clogged or damaged.

Check the suction hose for blockages and clean if necessary.
Store in a dry place and keep the batteries charged.

Replacement of parts

Nozzle rubbers: Check regularly for wear and replace if necessary to maintain good suction power.
Brushes and pads: Check these parts for wear and replace them if cleaning performance decreases.

Troubleshooting

Machine does not start: Check the power connection and whether the batteries are correctly inserted. Reduced suction power: Check the holding tank and suction nozzle for blockages.

Poor cleaning performance: Check the brushes for dirt or wear and replace them if necessary.
Water leakage: Check water tank seals and replace them if necessary.

Technical specifications

Packaging dimensions (LxWxH): 120 cm x 40cm x 37cm

Waste water tank capacity: 9
L Fresh water tank capacity: 5
L Working width: 45 cm

Brushing pressure: 23 kg
Battery voltage: 18V
Total power consumption: 600 W

Total weight: 21 kg
Working time per battery: 30 min.

Warranty and service

This product comes with a [1 year] warranty. Please contact your supplier for warranty claims or service inquiries. Keep your proof of purchase for any claims.
This means that within this period only material and manufacturing defects, AFTER EXCENTR’S ASSESSMENT will be repaired free of charge. Transport and/or travel costs shall be borne by the customer.

NO WARRANTY will be granted for defects caused by:
- the machine has been demonstrably overloaded.
- the machine has been used for purposes for which it was not constructed.
- the maintenance has been demonstrably poorly carried out.
- The maintenance was not carried out by an Excentr BV-certified mechanic.
- the information in this manual has not been properly followed.
- the machine has been used by unauthorized persons.
- the machine has already been repaired with non-original parts
- the machine has been modified without the written consent of EXCENTR.

NO WARRANTY is granted for worn parts, as listed in the section.

ABOUT COMPANY

EXCENTR B.V.
AMPÈREWEG 12, 4631 SP HOOGERHEIDE

+31(0)88 1700 601
WWW.EXCENTR.COM

FAQ

How often should I perform periodic maintenance?
We recommend performing periodic maintenance every 3 months or after every 100 hours of operation, whichever comes first.

Can I use third-party replacement parts?
To maintain optimal performance and safety standards, we recommend using only genuine replacement parts provided by the manufacturer.

Documents / Resources

EXCENTR X1 Daily Accu Floor Cleaning Machine [pdf] User Manual
X1, X1 Daily Accu Floor Cleaning Machine, Daily Accu Floor Cleaning Machine, Accu Floor Cleaning Machine, Cleaning Machine

References

User Manual

EXCENTR X1 Daily Accu Floor Cleaning Machine

Product Specifications

Product Information