EVOLVEO EasyPhone XR Keypad Phone Instruction Manual

Use a headset with a microphone to make calls while driving. Only pull your car over to the side of the road to make a phone call in an emergency.
Switch your phone off when you board the aircraft and do not switch it on on board.

Use extra caution when using the phone near pacemakers, hearing aids or other electronic medical devices that may interfere with the phone.
Never attempt to disassemble the phone yourself. If you have problems with your phone, contact your dealer or service.

Do not connect your phone to the charger unless the battery is inserted.
Use only the original charging adapter and charging stand for charging.

Protect your phone from magnetic fields. Keep her out of reach
items with magnetic elements, such as credit cards.

Protect your phone from liquids. If moisture penetrates or corrodes, remove the battery immediately and contact your dealer.
Do not use your phone in areas that are too cold or too hot. Never leave it in direct sunlight, in dusty environments or where there is high humidity.

Do not use liquids or wet substances with strong solvents to clean your phone.

PHONE DESCRIPTION

Earpiece

Volume
Left functional

Call, Call Answer, Call History
Favourite

Special symbols
Text input method, Mute sound

UP-DOWN in the menu or menu items
Camera

Lock – Unlock the keyboard
Switch on – Switch off the phone, End call

Right function button
Flashlight

INTRODUCTION

Place your phone face down and remove the back cover, facing up.
Locate the space for the MiniSIM-sized SIM card and insert it with the metal contacts facing down.

If you want, you can also insert a micro SDHC card with a maximum supported capacity of 32GB.
Secure it by pulling the metal locking cap to the LOCK position.
Insert the battery into your phone. Close the phone with the back cover.

BATTERY CHARGING

Make sure you have the battery inserted in your phone.
You can charge your phone when it is switched on or off.
The charging port is located at the bottom of the phone.
To charge this model of mobile phone, use a power adapter with a USB-C (Type C) connector with an output of at least 1A (adapter not included).

SWITCHING ON AND OFF

To switch on the phone, hold down the red handset button (11) until the phone switches on.
Enter the SIM card PIN, if required. To switch the phone off, hold down the red handset button (11) until the phone switches off.
Enter the SIM card PIN, if required.

CHANGE THE LANGUAGE ON YOUR PHONE:

Select Menu > 3x up arrow > Settings > OK > Phone settings > OK > Language > OK > select language > OK

To switch the phone off, hold down the red handset button (9 ) until the phone switches off.

KEYPAD LOCK

To lock the keypad, move the lock switch on the side of the phone upwards. Move it back down to unlock the keyboard. The phone lock password is used if you do not want others to use your phone. This password is usually provided by the phone manufacturer and can be changed afterwards.

The factory password for this device is 1122.

If your phone is locked, you will not be able to access it without entering the appropriate password. If you change the factory password, make a careful note of it!

LIGHTHOUSE

To switch on or off, slide the switch on the side of the phone.

PHONE MENU

Press the UP arrow to enter the phone menu, press the UP or DOWN arrows to move through the items.

You can confirm the selected menu option by pressing the button (3). To return to the previous menu or to cancel a selection, usually press the button (12).

CALLING

Enter the phone number on the phone keypad and press the green button to call (4). If there is an error in entering the number, press the right button (12) , “Delete” and the last digit will be deleted.

To answer an incoming call, press the green button (4).
To reject the call, press the red button (11).

To adjust the volume during a call, press (2).
To listen loudly (hands-free), press the button (12) during a call .

CONTACTS

Dial a number from the phone book

Press the DOWN button to enter the “Phonebook” menu . Find the number you want Press the button on the phone keypad containing the first letter of the name you want and use the Up/Down directional buttons to find the specific name.
Press the button (4) with the green handset to make a call.

TO STORE YOUR PHONE NUMBER IN YOUR PHONE’S MEMORY OR ON A SIM CARD

Write the number you want to save on the display, press (3) Options > Save to phonebook > To SIM or To phone. Enter the name under which the number will be saved > press the button (3) Options > Save.

SETTINGS

Preferred memory: selecting the memory to store the contact
Speed dial: after switching on, the keypad buttons can be assigned to 2 to 9 contacts.
To call these stored numbers, simply press the assigned button for more than 2 seconds .
Memory status: shows the SIM and Phone capacity usage

OPERATIONS

You can copy or move contacts between the SIM and the phone by selecting the menu option.

SETTING OF QUICK SELECTION M1, M2, M3

Menu > Phonebook > select Contact >Options > Add to specific key > select M1, M2 or M3 > Save

NOTIFICATION LED

Permanently lit: Bluetooth is on
Flashing: missed phone call or SMS message

SMS NEWS

In standby mode, press the UP directional button and confirm with OK.

WRITE A REPORT

First, write the content of the message.

TEXT WRITING

Press the # button repeatedly to switch between the input modes (ABC, abc, 123). When setting the abc/ABC options, you can press the 2-9 buttons to type letters.
Press the selected button repeatedly to enter any of the characters on it. One press of the first letter, two presses of the second letter and so on. To move the cursor left/right, press the UP/DOWN directional buttons .

INSERTION OF SYMBOLS, SPACES, DIGITS

Press the * button to open the menu of the available symbols and use the UP/DOWN arrow keys to select a symbol, confirm with the button (2).

Press the O button to insert a space. This option does not work in 123 number entry mode.

When “123” mode is selected, you can press buttons to directly insert single digits. To send a typed message, press (2) Options > Send > Insert number > Add from list and use the UP/DOWN arrow to select the recipient of the message and confirm OK > Send.

In the Messages menu you can also find Inboxes, Sent SMS messages, Drafts (broken down messages), Unsent or SMS Settings (option to set up SMS center, send Inbox) etc.

MMS NEWS

CHECKING DATA ACCOUNT SETTINGS

To send an MMS message, the Data Account must be set up correctly.

Check the Data Account settings, from the main screen, select Menu > Settings > Data Accounts. If no data account is created , select Options > Add GPRS account. Enter the APN, proxy values according to your mobile operator’s settings (APN, proxy and other settings can be found on your operator’s website).

WRITE AN MMS MESSAGE AND SEND

From the main screen, select Menu > Messaging > Write an MMS message. First type the text of the MMS message, then add a picture to send “Add picture”. Then select “Send to” > select the recipient from the list or enter the recipient’s phone number .
Select Options > Send.

MULTIMEDIA

FILE MANAGER

Allows you to work with files stored on the memory card (if it’s in your phone).

Camera: you need to insert a microSD card and then you can change the settings

Picture viewer: allows you to view pictures stored on the memory card (if it is inserted in your phone).

MUSIC PLAYER

Audio files must be saved on the microSD card in the “My music” folder.

RECORDER

Insert the microSD card and set additional recording options in the Options menu.

FM RADIO

To exit the FM radio menu, press the button with the red phone.

If you are in the FM radio menu, you can press 3 (Options) to call up this local menu: Channel list: If you have already tuned in each channel with stations, you can choose any one of them and start listening to it .

Manual input: you enter the radio frequency manually.
Automatic tuning: after confirming the dialog “Automatically search and save channels?” debugging is started.

Settings – Background playback: Activate background playback mode, even after leaving the FM radio menu.

SETTINGS

PROFILES

Allows storage of up to 4 profiles: Main, Silent, Meeting, Outside with the possibility of adjusting the type of signaling, ringing, volume, etc. You can customise the profiles and save your changes.

PHONE TIME AND DATE

Setting the date, time and daylight saving time on/off

LANGUAGE

Change the language on your phone: Select Menu > 3x up arrow > Settings > OK > Phone settings > OK > Language > OK > select language > OK

PREFERRED METHOD OF INSERTION

Choosing how to enter text

AIRPLANE MODE

When this mode is activated, the SIM card is disconnected and you cannot receive calls or make calls from your phone.

LCD BACKLIGHT

Change the brightness of the display using the button (8). Reducing the brightness of the display will extend battery life.

ILLUMINATED BUTTONS

To turn the button backlight on or off

DATA ACCOUNTS

Option to add a data account for MMS messages

SECURITY

Allows you to set the PIN code for the SIM card, phone and set the automatic keypad lock.
You will be asked to enter your PIN every time you switch on your phone.

PIN/PIN2 CODE

The PIN/PIN2 code (4 to 8 digits) is used to protect the SIM card from unwanted use by others. The PIN code is usually provided by your phone operator and comes with your SIM card. If you activate SIM card protection with PIN/PIN2, you will need to enter this PIN/PIN2 every time you switch on your phone. If you enter the PIN code incorrectly three times, the SIM card will automatically lock and you will not be able to enter the PIN/PIN2 code again.

Warning: If you enter the wrong PIN/PIN2 code three times, the SIM card will automatically lock and remain locked until you enter the PUK code. You can usually get a PUK code with your SIM card from your phone provider.

SOS SETUP

To enable SOS calling/sending SMS, go to Settings> SOS functions> Status: Off or On.

Pressing the SOS button on the back of the phone will trigger an audible alarm and automatically dial the numbers stored in the SOS number list. The phone will also send an SOS message, the text of this SMS message can be changed in the Settings > SOS message menu.

If the emergency call is answered, the phone automatically switches to hands-free speakerphone mode. If you want to exit this mode after activating the SOS function, press the button with the red handset (11).

RESTORE DEFAULT

Return your phone to factory settings (code 1122).EXTRA

BUDDY

You can set it in Extra > Alarm > Edit Use the buttons (6) and ( 7) to switch it on/off.
Set the time and type of repetition, melody and type To save everything, press the button (3).

BLUETOOTH

If you turn on Bluetooth and enable Visibility, you can use the My Devices menu to find other Bluetooth devices near your phone and pair your phone. Turning on Bluetooth increases power consumption and reduces battery life.

CALLER

The phone includes a calculator with basic operations. Enter the numbers (insert the decimal point by pressing the “#” button), use the up or down arrow to insert the individual number commands (+), (-), (x) or (/) and press the (3) button to confirm the operation.

STATEMENT OF TALKS

Press the green button (3) on the main screen to call up the list of recent calls. For a full list of all calls, please refer to the “Call listing” menu.

PROBLEM SOLVING

The phone cannot be switched on

Is the battery at least partially charged?

Is the battery inserted correctly?

The battery cannot be charged

Check that the charger is properly connected.

Is the battery working? Battery functionality decreases in proportion to the length of use and may not be functional after more than a year.
Is the battery fully discharged? In this case, the phone and battery must be connected to the charger for a longer period of time before charging can start. It could be tens of minutes.

Unable to log in to the operator’s network

Signal is too weak or may be interfered with. Check the signal strength by the icon on the phone display to see if there are vertical lines next to the antenna .
Is the SIM card inserted correctly? He’s not making bad contact? If the SIM card is damaged, ask your operator to replace it.

Cannot make phone calls

Is your phone logged into your network?
No call blocking active?
Do you have enough credit?

Cannot receive calls

Is your phone logged into your network?
Do you have enough credit?

Not active call forwarding?
No call blocking active?

Your phone is locked with a PIN

Enter the PUK code you received from your operator with your SlM card to unlock the PIN or contact your operator.

SIM card error

SIM card has dirty contacts. Clean them up.

SIM card is damaged. Replace it with another one.

The phone is not behaving normally

Select Settings >Reset default for returning the phone to the original condition it was in out of production. Enter the factory password 1122 if you have not changed it yourself before.

Do you still need advice after reading this guide?

First read the “FAQ” at https://eshop.evolveo.com/ or contact EVOLVEO Technical Support

TECHNICAL SUPPORT

https://eshop.evolveo.com/helpdesk/

The warranty is NOT valid for:

using your mobile phone for other purposes
mechanical damage caused by improper use
damage caused by natural elements such as fire, water, static electricity, surges, etc.
damage caused by unauthorised repair
damage to the warranty seal or illegible serial number of the device
the battery if it does not maintain its original capacity after more than 6 months of use (the battery capacity warranty is 6 months)

LIKVIDATION

The crossed-out container symbol on the product, in literature or on the packaging means that in the EU all electrical and electronic equipment, batteries and accumulators must be placed in the separate waste stream at the end of their useful life. Do not dispose of these products in unsorted municipal waste.

DECLARATION OF CONFORMITY

Abacus Electric s.r.o. hereby declares that the EVOLVEO Easy Phone XR complies with the requirements of the standards and regulations applicable to this type of device.

The full text of the Declaration of Conformity can be found at http://ftp.evolveo.com/ce

Customer Support

Importer / Manufacturer

Abacus Electric, s.r.o.

Design and specifications are subject to change without notice.

Documents / Resources

EVOLVEO EasyPhone XR Keypad Phone [pdf] Instruction Manual
EasyPhone XR Keypad Phone, Keypad Phone, Phone

References

User Manual

Dear Customer,

IMPORTANT NOTICE