EVOLVE A4 Sheets Plain Paper
Specifications
- Product: Cleaning Machine
- Cleaning Frequency: Daily
- Hygiene Kit: Supplied
Description
- Certified FSC recycled
- Exceptional Smoothness
- High Whiteness
- Outstanding Quality
- Two-sided Printing
- No Compromise
Evolve Everyday is a paper manufactured from 100% post-consumer recycled waste paper. It is ideal for archiving, volume use, and everyday internal communications
- Evolve is made in a life cycle approach to minimise the impact on the environment at every stage of production, use and disposal. And it is acid free
- There is no use of natural forest as Evolve is certified Forest Stewardship Council (FSC) as recycled. And it is produced in an ISO 9001 and ISO 14001 certified mill
Cartons are made using recycled fiber and can be recycled
Evolve 100% recycled paper is made in a life cycle approach to minimise the impact on the environment at every stage of production, use and disposal. Products are manufactured at the Alizay mill, located in the Normandy region in the north-west of France. Employing about 150 highly qualified people, the mill has a total production capacity of 300,000 tons of paper per year.
Alizay is an industry leader in environmental sustainability – recycling large amounts of water, using waste products as energy sources, and continuing to reduce both carbon emissions and raw water usage.
Key figures
- Around 150 employees
- An annual production capacity of 300,000 tons of paper
- The mill can manufacture 1100 tons of paper in 24hours
Certifications
- Alizay Mill is certified ISO 9001 (Quality System)
- Alizay Mill is certified ISO 14001 (Environmental System)
- Alizay Mill is certified FSC (Forest protection)
A Strategic Location
Generating activities both before and after the manufacturing, the Alizay mill plays a significant role in the local economy. Its ideal geographical location near the Rouen and Le Havre ports enables efficient delivery to global customers.
Product Usage Instructions
Cleaning Guide
This machine must be cleaned daily. Use the hygiene kit provided for ease of cleaning. Swap out the parts and wash them thoroughly to minimize machine downtime.
Daily Cleaning Steps
- Remove all contact parts and empty the waste bucket.
- Ensure the overflow tube and weight are replaced in the bucket.
- Final wipe down of the machine and floor if needed.
Machine Maintenance
- Remove the drip tray chute carefully.
- Fit the impeller by aligning the pipe layout correctly.
- Flush the machine for final cleaning.
Thorough Cleaning
- Empty and wipe the waste bucket, ensuring the overfill weight is inserted.
- Remove and clean the drip tray/chute.
- Wipe down the flavor deck.
- Remove, clean, and replace mixing bowls.
- Remove, clean, and replace impellers and dust caps.
- Remove, clean, and replace the whipper base.
- Clean the canisters by twisting the chute upwards and agitating the powder with the auger.
Installation-Loading Instructions
Unpack the Paper
- Open the packaging carefully.
- Remove any protective wrapping or cardboard separators.
- Check that the paper is not bent, folded, or damaged.
Prepare the Printer / Copier / Device
- Make sure the printer or copier is turned off or in standby mode.
- Pull out the paper tray or manual feed slot.
Load the Paper
Fan the Sheets
-
Hold the stack of paper and gently fan the edges to prevent sheets from sticking together.
Align the Paper
-
Tap the stack on a flat surface to align edges.
Insert the Paper
- Place the paper into the tray or manual feed slot.
- Make sure the printable side is facing the correct direction (usually glossy side down for laser printers; check your printer manual).
Adjust Guides
- Slide the paper guides to fit snugly against the paper stack.
- Avoid over-tightening, which may cause jams.
Configure Printer Settings
- Select A4 size in the printer settings.
- Choose the paper type as plain paper.
- Adjust any quality or duplex settings as needed.
Test Print
-
Print a single test page to ensure proper feeding and alignment.
Frequently Asked Questions
How often should I clean the machine?
What should I do if the machine has been left without use for an extended period?
Documents / Resources
 | A4 Sheets Plain Paper |
References
- User Manualmanual.tools