EVERCADE 6151DO26 Bluetooth Controller Instruction Manual

EVERCADE 6151DO26 Bluetooth Controller

Specifications

• Controller battery: Built-in 550mAh lithium battery with smart power-saving technology
• Range: Line-of-sight transmission distance exceeds 7 meters
• Power/Charging input: Standard USB 5V DC (charging voltage must be within USB 4.5V–5.5V DC)
• Full charge duration: Approximately 3 hours
• Low battery shutdown limit: Auto power off when voltage drops to 3.5V
• Turbo rate adjustment: 5 Hz (default) up to 20 Hz; programmable via TURBO + Right Stick
• Supported platforms: Switch (one-key wake-up), PC (Windows) with X-input and D-input modes (seamless switching), Android, iOS, PS3, and VS-R console support via receiver X-input mode

Quick Setup & Use

• Power on: Long-press START. The four-channel LEDs display battery level.
• Connect wirelessly (PC with Bluetooth receiver): With the receiver plugged into a PC USB port, press the receiver button for 1 second. With the controller powered off, hold START + Y for 1 second to power it on (LED 1 flashes). Long-press PAIR for 3 seconds to pair (LEDs scroll/flash). After success, LED 1 remains solid. For later use, press START once to auto-reconnect.
• Connect via Bluetooth (PC): With the controller powered off, hold START + X for 1 second (LED 2 flashes). Long-press PAIR for 3 seconds, then pair from your computer Bluetooth settings (search for Xbox Wireless Controller). After success, LED 2 remains solid. Later uses: press START once.
• Connect to Nintendo Switch: From the Switch home screen, go to Controllers and enter [Change Grip/Order]. With the controller powered off, hold START + Y for 1 second (LED 1 flashes). Long-press PAIR for 3 seconds to pair. After success, LED 1 remains solid. Later uses: press START once.
• Connect to Android/iOS: With the controller powered off, hold START + B for 1 second (LED 3 flashes). Long-press PAIR for 3 seconds, then connect from your device’s Bluetooth settings to Wireless Controller. After success, LED 3 remains solid. Later uses: press START once.
• Turbo: Hold the chosen compatible function button while using TURBO + Function to set manual/auto turbo, and use TURBO + SELECT (hold 3 seconds) to clear all turbo.

Overview

• To meet Market Demand, For Customer Developed a Bluetooth Controller; appearance: elegant, Streamlined Shape, Ergonomic Design; dedicated to creating a professional wireless controller, Let You Enjoy Gaming More Effortlessly.

Function Description

1. Supports Switch console platform with one-key wake-up function.
2. Supports PC (Windows) platform with X-input and D-input modes and switching.
3. Supports Android (phone, box, TV) and iOS platforms.
4. Supports PS3 platform.
5. Supports VS-R console. (VS-R console has no Bluetooth, implemented via receiver’s X-input mode)
6. Built-in 550mAh lithium battery with smart power-saving technology for extended gaming time.
7. Controller supports turbo function.
8. Supports sleep and wake-up functions.
9. Line-of-sight transmission distance exceeds 7 meters.

Product Diagram

Receiver Diagram

Controller Diagram

Key Mapping Table

Usage Instructions

Power On/Off

1. When powering on by long-pressing the START button, the four LED channel indicators show battery level:
   • LED1 On — Battery voltage below 3.55V
   • LED1+LED2 On — Battery voltage 3.55V~3.80V
   • LED1+LED2+LED3 On — Battery voltage 3.80V~4.00V
   • LED1+LED2+LED3+LED4 On — Battery voltage above 4.00V
2. Platform Switching and Channel LED Indicators:

Note: Use Bluetooth Switch mode to connect to the receiver for auto-detection. NS console defaults to Switch mode; PC defaults to Xinput mode)

Controller Wired Mode

1. supports Xinput—LED2, Dinput—LED3, SWITCH—LED1
2. PC defaults to Xinput; Long-press START+SELECT for 3 seconds to switch to Dinput and SWITCH mode
3. Auto-detected as Switch mode on Switch console

PC Usage

1. Plug the receiver into the PC USB port, press the button on the receiver for 1s; the receiver indicator flashes rapidly.
2. When powered off, hold controller START+Y for 1 second to power on; LED 1 flashes.
3. Long-press the pair button for 3 seconds to pair; channel LEDs scroll and flash. After successful connection, channel LED 1 stays solid.
4. For next use, press START button once and the controller will auto-reconnect.

Bluetooth Connection

1. When powered off, hold the controller START+X for 1 second to power on; LED 2 flashes.
2. Long-press the pair button for 3 seconds to pair; channel LEDs scroll and flash.
3. Open ” Computer Bluetooth Connection”, ” Xbox Wireless Controller”. After successful connection, channel LED 2 stays solid.
4. For next use, press the START button once, and the controller will auto-reconnect.

Switch Console Usage

1. Tap Settings at the bottom of the Switch home screen to enter the [Change Grip/Order] screen.
2. When powered off, hold controller START+Y for 1 second to power on; LED 1 flashes.
3. Long-press the pair button for 3 seconds to pair; channel LEDs scroll and flash. After successful connection, channel LED 1 stays solid.
4. For next use, press the START button once and the controller will auto-reconnect.

Connect Android/iOS

1. When powered off, hold controller START+B for 1 second to power on; LED 3 flashes.
2. Long-press the pair button for 3 seconds to pair; channel LEDs scroll and flash.
3. OpenDeviceBluetooth ConnectionWireless Controller. After successful connection, channel LED 3 stays solid.
4. For next use, press the START button once and the controller will auto-reconnect.

Turbo (TURBO) Function
Buttons that can be set for TURBO function: A, B, X, Y, LB, RB, LT, RT

Controller Inner Dead Zone Quick Switch

• Simultaneously press [L3+R3]Button5 sec, LED1+LED4Flash3timeIndicatesSuccessfully switched zero dead zone mode and 10% dead zone mode.
• Stick Square/Circle Adjustment Switch first. Simultaneously hold [L3+R3]Button, then press START Button; LED2+LED3 flash 3 times, LED2+LED3Flash3timeIndicatesSuccessfully switched stick square/circle adjustment.

3D Stick Calibration

When the stick drifts or fails to center, use the controller calibration function.

1. When powered on, simultaneously press controller SELECT+A+Home for 3 seconds to enter calibration mode; the 4 channel LEDs flash alternately in two groups.
2. Smoothly rotate both sticks 2-3 turns, ensuring the sticks reach the edges.
3. When the controller is placed on a level surface, Then pressController STARTButton, ReleaseController Button3secAfterAutoComplete 3D Stick Calibration, whenControllerRestoreWorking State.

Reset Function

1. Hardware Reset: When the controller malfunctions, freezes, or has other abnormalities, long-press the START button for 10 seconds to force power off.
2. Software Reset: Long-press the pair button for 8 seconds; the controller restores factory settings, the power indicator flashes for 1 second, indicating successful reset, controller enters an unlocked state.

Battery Function

1. Charging Power: Standard USB 5V voltage; can use a phone charger, computer or other USB interfaces to charge the controller; full charge time is approximately 3 hours.
2. When the controller wakes from sleep to power-on pairing, channel LEDs briefly indicate battery level.
3. When the battery is low, the current connection mode channel LED flashes slowly; stays solid when fully charged.
4. Charging when powered off: Plug in the charging cable; four LEDs flash; all four LEDs turn off when fully charged.
5. When the battery is low, the current mode indicator flashes slowly; charge the controller promptly.
6. Power-off voltage: 3.5V.

Sleep Function

Troubleshooting

• When unable to power on, the built-in battery may be depleted; use a USB cable to charge the controller before powering on.
• When the controller unexpectedly freezes or disconnects, keep within a reasonable distance from the device or reconnect.
• If you find the stick not centering in Switch games, recalibration is needed.

Precautions

1. Avoid strong vibrations; do not disassemble, modify, or repair by yourself.
2. Avoid storing in damp, high-temperature, or oily environments.
3. Avoid water or other liquids entering the controller, which may affect functionality.
4. Contains a battery; do not throw the controller into fire; explosion hazard.
5. This product’s charging voltage is USB 4.5-5.5V DC; otherwise, it may not charge or may cause damage.
6. Children should use this product under adult supervision.
7. For quality issues or suggestions, please contact the dealer or after-sales service.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.