MK1 Front support brace installation
MK1 Engine Conversion Kit
Front support brace included in stage 2 /Stage 2+ / Stage 3
Bolts on left and right frame rails that hold in the front bumper are removed to attach the front core support brace. Remove front engine mount cup to install brace to front core support then reinstall the front cup after.
ALL MK1 chassis are not treated equally. Please keep in mind not knowing the history some front frame rails could have been repaired and not even. In some cases too wide or narrow. We include spacers to compensate in some cases. Sometimes you need them and sometimes you may not. We build them so in those cases you can use. If you need to bend the outer brackets out to meet the frame rails flush that is completely normal.
IF YOU HAVE ANY QUESTIONS, COMMENTS, OR CONCERNS RELATED TO YOUR PRODUCT PLEASE CONTACT US!
\
https://qr.page/g/3U4jPKqCrIF
440 SPRINGBROOK ROAD. CHARLOTTE, NC 28217 | 704-559-8100
INFO@EUROWISE.COM | WWW.EUROWISE.COM | SHOP.EUROWISE.COM
Documents / Resources
 | eurowise MK1 Engine Conversion Kit [pdf] Installation Guide MK1 Engine Conversion Kit, MK1, Engine Conversion Kit, Conversion Kit |