Eurener MEPV 120 Bif PV Module

Eurener MEPV 120 Bif PV Module

Feature

Feature  N-type cell
Higher resistance to LID and LeTID
Feature  TOPCon
Technology to increase cell efficiency
Feature  Bifacial cell
Improved energy yield
Feature  Super MBB
Reduced resistance losses and improved current collection
Feature  Better temperature coefficient
Minimized thermal losses, improved efficiency
Feature  Sustainable product
High percentage of recyclable materials

Dimension

Dimension 
Dimension 

Mechanical Specification

Solar cells 120 (6 x 20), N-Type bifacial monocrystalline silicon cells
Front Glass 2mm anti-reflective surface solar glass
Back Glass 2mm solar glass
Frame Black/silver anodized aluminum
Junction Box IP68, 3 by-pass diodes
Connector Original MC4-Evo 2
Cable 1000 mm (±20%) length an 4 mm² section
Dimension 1909 x 1134 x 30 mm (±1%)
Area 2,16 m²
Weight and packaging 25,9 kg, 864 pcs-truck

Temperature Coefficients

Temperature coefficient of Isc (α) 0,045 %/°C
Temperature coefficient of Voc (β) -0,275 %/°C
Temperature coefficient of Pmax (γ -0,29 %/°C
Temperature range -40 °C ~ +85 °C
Nominal operating cell temperature (NOCT) 45 ± 2 °C

 

Black – Standard

MEPV 475

MEPV 480

STC: 1000 W/m2, module temperature 25ºC, AM 1,5

Nominal power. Pmax

475 Wp 480 Wp
Module efficiency 21,95 %

22,18 %

Short-circuit current (Isc)

14,24 A 14,34 A
Open-circuit voltage (Voc) 42,53 V

42,63 V

Maximum power current (Imp)

13,50 A 13,60 A
Maximum power voltage (Vmp) 35,20 V

35,31 V

NOCT: 800 W/m2, ambient temperature 20ºC, AM 1,5

Nominal power. Pmax

357,14 W 360,97 W
Short-circuit current (Isc) 11,49 A

11,55 A

Open-circuit voltage (Voc)

40,41 V 40,57 V
Maximum power current (Imp) 10,79 A

10,85 A

Maximum power voltage (Vmp)

33,10 V

33,27 V

Electrical characteristic’s with 10% rear side power gain

Nominal power. Pmax

522,50 W 528,0 W
Short-circuit current (Isc) 15,61 A

15,72 A

Open-circuit voltage (Voc)

42,56 V 42,71 V
Maximum power current (Imp) 14,81 A

14,91 A

Maximum power voltage (Vmp)

35,29 V

35,41 V

Operating parameters

Maximum voltage

1000 – 1500 V
Maximum series fuse rating. Ir

25 A

Power output tolerance

0 – +3%
Voc and Isc tolerance

±3%

Fire rating

Class A (UL 790)
Protection class

Class II (IEC 61140)

Hail resistance

Ø 25mm at 23 m/s (IEC 61215)
Mechanical loads

Front load 5400 Pa, Back load 2400 Pa

NOTE: Read the instruction manual of this product and follow the indications STC. Values are valid for: 1000W/m2, AM 1,5 and cells temperature of 25ºC.
Measurement tolerance +/-3% (AAA Solar simulation -IEC 60.904-9-). All the information of this brochure may be amended without notice by Eurener.
Eurener_MEPV 120_NEXA Bif_475-480Wp_EN_JAN2024

Product Warranty

Product Warranty
Symbols
Product Warranty

Customer Support

eurener.com
contact@eurenerworld.com
+34 960 045 515
Calle Colón, 1-23
46004, Valencia. Spain

Manufacturing a better world
Since 1997 our main purpose has been to supply quality and long-lasting photovoltaic modules that allow us and future generations, to continue generating clean energy to take care of our planet.

Eurener-Logo

Documents / Resources

Eurener MEPV 120 Bif PV Module [pdf] User Guide
MEPV 120 Bif Eurener PV Module, MEPV 120, Bif Eurener PV Module, Eurener PV Module, PV Module, Module

References

Leave a comment

Your email address will not be published. Required fields are marked *