euker-logo

euker PB6 Portable Charger with Built in Cables

euker-PB6-Portable-Charger-with-Built-in-Cables-product

Model: PB6

Thank you for choosing the Euker PB6 power bank! Please read this manual before first use and keep it handy for future reference.

Product Description

euker-PB6-Portable-Charger-with-Built-in-Cables-fig-1

Package Contents

euker-PB6-Portable-Charger-with-Built-in-Cables-fig-2

Specifications

  • Micro Input: 5V=2A, 9V=2A
  • USB-C Input: 5V=3A, 9V= 2A
  • USB-C Output: 5V=3A, 9V=2.22A, 12V= 1.SA
  • USB-A Output: 5V=3A, 9V=2A, 12V=1.5A, 5V=4.5A, 4.SV=SA 1#Cable Output: 5V=3A, 9V=2A, 12V=1.5A, 5V=4.5A, 4.SV=SA 2#Cable Output: SV= 2A
  • Battery Type: Lithium Polymer
  • Battery Capacity: 10000mAh/3.7V/37Wh
  • Rated Capacity: 6000mAh(SV= 2.4A)
  • Size: 5.84×2.68×0.67in/148.4x68x17mm
  • Weight: 8.3oz/235g

Operating Instructions

  1. Charging for the power bank
    Connect the USB-A port of the USB-A to USB-C charging cable to the power supply device.The power supply device could be the AC charger, as shown in picture(1) or the computer’s USB-A interface as shown in (2), and then connect the other end into the USB-C port of the power bank to keep the power bank charged.

    euker-PB6-Portable-Charger-with-Built-in-Cables-fig-3

  2. Power on
    • Connect your phone to the output port of the power bank and the charging function is automatically turned on.
    • Short press the button: Power on (The power indicator is on).

      euker-PB6-Portable-Charger-with-Built-in-Cables-fig-4

  3. Shut down
    • Double-click the button to shut down.
    • In the normal discharge mode: The discharge function is turned off about 35 seconds after the mobile phone has been disconnected from charger or the mobile phone has been fully charged. The power bank will then be turned off and enter a shutdown state.
  4. Description of charging power display
    Status FastCharging & SlowCharging Battery level (0%-25%) Battery level (25%-50%) Battery level (50%-75%) Battery level (75-100%) Battery level (100%)
      25%battery          
     

    Charging

    indicator is purple when fast charging, andblue

    when slow

    25%battery indicator flashing 50%battery indicator flashing 75%battery indicator flashing 100%battery indicator flashing Allfour battery indicator
      charging          

     

  5. Description of discharging power display

     

    Status

    Fast

    Charging

    &Slow Charging

    Battery level (0%) Batter level (0%-5%) Battery level

    (5%-25%)

    Batter level

    (25-50%)

    Battery level

    (50-75%)

    Battery level (100%)
     

     

    Discharging

    25%

    battery
    indicator
    is purple
    when fast

    charging, and blue when slow charging

     

     

    battery indicators are off

     

     

    battery indicator flashing

     

     

    the battery indicator is always on

     

    Two battery indicators are always

     

    Three battery indicators are always

     

    Four battery indicators are always on

     

Important Safety Instructions

When using this product, basic precautions should always be followed, including the following:

  • Store the product in a cool, dry place.
  • Do not store the product in a hot or humid environment.
  • Do not dispose of the product in heat or fire.
  • Do not clean the product with harmful chemicals or detergents.
  • Operating temperature should be between 0°C to 45°C/32°F to 113° F.
  • Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
  • lf the product is not used for long periods of time, you should charge and discharge it once every three months.
  • When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
  • In normal conditions, the battery performance will decline over several years.
  • Misuse, dropping, or excessive force may cause product damage.
  • When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
  • Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EU Representative: Ma Wei Aasheng International Investment Consulting GmbH
Address: Rodenberger Allee 23, 31542 Bad Nenndorf. Germany Tel: +49 15206266951
UK Representative: CET Product Service Ltd.
Address: Beacon House Stokenchurch Business Park, lbstone Rd, Stokenchurch High Wycombe HP14 3FE UK
Tel: +447419325266

Customer Service:
support@eukers.com
www.eukers.com
Made in China

Documents / Resources

euker PB6 Portable Charger with Built in Cables [pdf] User Manual
PB6, PB6 Portable Charger with Built in Cables, Portable Charger with Built in Cables, Charger with Built in Cables, Built in Cables, Cables

References

Leave a comment

Your email address will not be published. Required fields are marked *