eufy C33 Smart Lever Lock User Guide

Download and install the eufy Security app on your device and create an account.
Follow the in-app instructions to add the Smart Lever Lock C33 to your device list.

Important Warnings:
Do not mix different types of batteries. Follow proper battery disposal guidelines to prevent explosions or leaks.

RF Exposure Information:
Maintain a distance of at least 20cm between the device and the human body to comply with RF exposure requirements.

Recycling Information:
Do not discard the product as household waste. Deliver it to a recycling facility for proper disposal to protect the environment.

FCC Statement:
Use shielded cables for connections to maintain compliance with FCC regulations.

SETTING UP THE SYSTEM

Download and install the eufy Security app, then sign up for an account.
Follow the in-app instructions to add the Smart Lever Lock C33 to your device list.

For online support, tutorial videos, FAQs, and more information, please visit http://support.eufy.com/s/.

Scan the QR code to read the detailed user guide.

NOTICE

Do not use the equipment in the environment at too high or too low temperatures. Never expose the equipment under strong sunshine or too wet environment.
The suitable temperature for the equipment is -100C to 500C (140F to 1220F) for the interior lock, and -300C to 700C (-220F to 1580F) for the exterior lock.

When supplying, please place the equipment in an environment that has a normal room temperature and good ventilation.
It is recommended to supply the equipment in an environment with a temperature that ranges from 50C – 250C (410F – 770F).

The equipment is only suitable for mounting at heights < 2 m.
Do not use the equipment in any way other than described herein in order to avoid personal injury or property damage.

User should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators’ legal liability under any circumstances.

RF exposure information:
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.

Frequency bands and power are as below:

Function	Operation Frequency	Bands	Max. Power
NFC	13.56 MHz	NFC	ERP 5.24 dBm
Bluetooth	2402-2480 MHz	2.4 GHz	EIRP 8.0 dBm
Wi-Fi	2412-2472 MHz	2.4 GHz	EIRP 8.0 dBm (assumed)

The following importer is the responsible party (contract for EU matters):

Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.

Warning

Replacement of a battery with an incorrect type that can defeat a safeguard;
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

CAUTION!
THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.

Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

The following importer is the responsible party

Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004

Telephone: 1-800-988-7973

IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and

this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

IC Radiation Exposure Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

CUSTOMER SERVICE

18-month limited warranty
(US/Canada) +1 (800) 988 7973

(AU) +61 3 8331 4800
support@eufy.com
service@myeufy.com.au (AU)

Model: T85L0

FAQ

Q: What should I do if the Smart Lever Lock C33 is not connecting to the eufy Security app?
A: Ensure that the lock is within range and follow the app’s troubleshooting steps. Contact customer support if issues persist.

Q: How often should I replace the batteries in the Smart Lever Lock C33?
A: Replace the batteries as soon as you notice reduced performance or receive low battery notifications from the app.

Documents / Resources

eufy C33 Smart Lever Lock [pdf] User Guide
T85L0, 2AOKB-T85L0, 2AOKBT85L0, C33 Smart Lever Lock, C33, Smart Lever Lock, Lever Lock, Lock

References

User Manual

eufy C33 Smart Lever Lock

Product Usage Instructions

SETTING UP THE SYSTEM

FCC Statement

FAQ

Documents / Resources

References

Leave a comment

Cancel reply