AITEK ALPHA-811 LED RGB sabaiko argi adimenduna erabiltzailearen eskuliburua

Sarrera

Thank you for choosing the AITEK ALPHA-811 Smart LED RGB Ceiling Light. This manual provides detailed instructions for the safe installation, setup, operation, and maintenance of your new smart lighting device. Please read this manual thoroughly before installation and keep it for future reference.

Produktua amaituview

Ezaugarri nagusiak

• RGBCW LED Technology: Combines RGB (Red, Green, Blue) with Warm White and Cool White for a full spectrum of colors and adjustable white light.
• Kolore-tenperatura erregulagarria: From 2700K (warm white) to 6500K (cool white).
• Argi-fluxu handia: 2200 lumens for bright and efficient illumination.
• Potentzia irteera: 24W + 3W (RGB).
• Kontrol adimenduna: Compatible with Aitek Smart App (Android & iOS), Amazon Alexa, and Google Assistant.
• Funtzio polifazetikoak: Dimmable, multiple RGB effects, timer, group control, and custom scenes.
• Atxikitako instalazioa: Designed for flush mounting in ceilings.
• Zabala Voltage Barrutia: Operates on 100V to 265V.
• Bizitza luzea: Gutxi gorabehera 30,000 ordu.
• Babes sendoa: Electrical resistance up to 2500V, surge protection up to 1000V.

Paketearen edukia

• 1 x AITEK ALPHA-811 Smart LED RGB Ceiling Light
• 1 x Urruneko kontrola
• 1 x Instalazio Kit
• 1 x Erabiltzailearen eskuliburua

Figure 1: AITEK ALPHA-811 Smart LED RGB Ceiling Light and its remote control.

Segurtasun Informazioa

Produktuari kalterik edo lesiorik ez egiteko, jarraitu segurtasun neurri hauek:

• Always disconnect power at the circuit breaker before installation, maintenance, or cleaning.
• Zalantzarik baduzu, instalazioa elektrizista kualifikatu batek egin beharko luke.
• Ez saiatu argiztapena aldatzen edo desmuntatzen.
• Ziurtatu liburukiatage supply matches the product's specifications (100-265V).
• Keep the product away from water and high humidity.
• Do not operate the light if it is damaged.

Instalazioa

Beharrezko tresnak

• Bihurkin (Phillips burua)
• Wire strippers
• Drill (if creating a new opening)
• Neurtzeko zinta
• Arkatza
• Segurtasun betaurrekoak

Instalazio urratsak

1. Itzali energia: Locate the circuit breaker for the room where you will install the light and turn off the power. Verify power is off using a voltage probatzailea.
2. Prestatu Irekiera: If replacing an existing fixture, remove it. If installing in a new location, mark and cut a circular opening in the ceiling with a diameter appropriate for the 30cm recessed light.
3. Konektatu kableatzea: Carefully connect the household electrical wires to the light fixture's wires. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Use wire nuts from the installation kit to secure connections.
4. Gailu segurua: Gently push the light fixture into the ceiling opening. The spring clips on the sides of the fixture will hold it securely in place.
5. Berrezarri boterea: Gailua ondo instalatuta dagoenean, piztu berriro etengailuan.

2. Irudia: Atzealdea view of the light with mounting bracket and wiring.

3. irudia: Xehetasuna view of the recessed mounting mechanism.

Konfigurazioa

1. Aplikazioaren instalazioa

• Download the 'Aitek Smart' app from the Apple App Store (for iOS) or Google Play Store (for Android).
• Erregistratu kontu berri bat lortzeko edo hasi saioa dagoeneko baduzu.

2. Pairing with Aitek Smart App

1. Ziurtatu zure telefonoa 2.4 GHz-ko Wi-Fi sare batera konektatuta dagoela.
2. Turn the light on and off three times rapidly (on-off-on-off-on). The light should start blinking rapidly, indicating it's in pairing mode.
3. Open the Aitek Smart app, tap '+' to add a device, and select 'Lighting' or 'Ceiling Light'.
4. Follow the on-screen instructions to connect the light to your Wi-Fi network.
5. Once connected, you can rename the device and control it via the app.

3. Connecting to Voice Assistants (Alexa / Google Assistant)

• Amazon Alexa-rentzat: Open the Alexa app, go to 'Skills & Games', search for 'Aitek Smart', enable the skill, and link your Aitek Smart account. Then, 'Discover Devices'.
• Google Laguntzailea egiteko: Open the Google Home app, tap '+' > 'Set up device' > 'Works with Google', search for 'Aitek Smart', and link your account.

Funtzionamendua

Urruneko Kontrol Funtzioak

The included remote control allows for basic operation without the app or voice assistants.

Figure 4: Remote Control for AITEK ALPHA-811.

• ON/OFF: Argia pizten edo itzaltzen du.
• Distira +/-: Argiaren intentsitatea doitzen du.
• Color Temperature +/- (K): Adjusts between warm white and cool white.
• RGB/Mode: Cycles through RGB colors and dynamic lighting modes.
• Konfigurazioa: Used for pairing or resetting the light.
• Tenporizadorea: Sets a timer for the light to turn off.
• Gaueko modua: Activates a low-brightness, warm light setting.

Aplikazioak kontrolatzeko funtzioak

The Aitek Smart app provides full control and advanced features:

• Piztu/Itzali: Remote control of the light.
• Brightness & Color Adjustment: Precise control over brightness, color temperature, and RGB colors.
• Eszena moduak: Choose from pre-set scenes or create custom lighting scenes.
• Tenporizadorea eta ordutegia: Set schedules for the light to turn on/off automatically.
• Taldearen kontrola: Control multiple Aitek Smart lights simultaneously.
• Automatizazioa: Create smart automations based on conditions like time, weather, or other smart devices.

Ahots-kontroleko komandoak

Once connected to Alexa or Google Assistant, use commands like:

• "Alexa/Hey Google, turn on [Light Name]."
• "Alexa/Hey Google, set [Light Name] to 50% brightness."
• "Alexa/Hey Google, change [Light Name] to blue."
• "Alexa/Hey Google, set [Light Name] to warm white."

Figure 5: Light installed in a kitchen setting.

Figure 6: Light installed in a bedroom, controlled by remote.

Mantentzea

Garbiketa

• Ziurtatu argia itzalita dagoela garbitu aurretik.
• Wipe the surface of the light fixture with a soft, dry, or slightly damp oihal.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as they may damage the finish.

Biltegiratzea

If storing the light for an extended period, keep it in its original packaging in a cool, dry place away from direct sunlight and extreme temperatures.

Arazoak konpontzea

Ohiko arazoak eta irtenbideak

Zehaztapenak

Bermea eta Laguntza

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact AITEK customer service through their official website or the Aitek Smart app. Please have your model number (ALPHA-811) and purchase details ready when contacting support.