Sarrera
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Ikea VIRRMO LED Ceiling Lamp. Please read all instructions carefully before beginning installation or use. Keep this manual for future reference.
The Ikea VIRRMO LED ceiling lamp is a 36 cm nickel-plated fixture designed to provide 800 lumens of warm white light (2700K) with a high Colour Rendering Index (>80). It features energy-efficient LED technology with an estimated lifespan of 15,000 hours.
Segurtasun Informazioa
- Always disconnect power at the main fuse or circuit breaker before installation or maintenance.
- Instalazioa elektrizista kualifikatu batek egin behar du, tokiko araudi elektrikoen arabera.
- Ez aldatu lamp edozein modutan.
- Ensure the ceiling structure can support the weight of the lamp.
- Produktu hau barruko erabilerarako soilik da.
Paketearen edukia
- VIRRMO LED sabaia Lamp (unitate 1)
- Instalazio-tresneria (torlojuak, hormako takoak)
- Argibide eskuliburua
Note: A ceiling hook is required for installation but is not included in the package.
Konfigurazioa eta Instalazioa
Follow these steps for proper installation of your VIRRMO LED Ceiling Lamp. Professional wired-in installation is recommended.
- Instalazio eremua prestatu: Ziurtatu instalazio-eremuko energia-hornidura etengailu nagusian itzalita dagoela.
- Markatu zulatzeko puntuak: Hold the mounting bracket (if separate) or the lamp base against the ceiling at the desired installation point. Mark the positions for drilling.
- Zulatzeko zuloak: Zuloak egin markatutako posizioetan. Beharrezkoa bada, sartu hormako takoak.
- Secure Mounting Bracket/Base: Attach the mounting bracket or the lamp base securely to the ceiling using the provided screws. Ensure it is firmly fixed.
- Konexio elektrikoa: Konektatu sabaitik kable elektrikoak l-raamp's terminals. Ensure correct polarity (Live to Live, Neutral to Neutral, Earth to Earth). Use appropriate wire connectors.
- Muntatu Lamp: Kontu handiz lotu l-aamp body to the secured mounting bracket or base. Ensure all connections are tight and the lamp egonkorra da.
- Berrezarri boterea: Instalazioa amaitutakoan eta konexio guztiak ondo finkatuta daudenean, berrezarri korrontea etengailu nagusitik.
- Probatu Lamp: Turn on the light switch to ensure the lamp behar bezala funtzionatzen du.
Image: The Ikea VIRRMO LED Ceiling Lamp, nickel-plated, installed on a ceiling, illuminating the area with warm light.
Image: A detailed close-up of the VIRRMO lamp, highlighting its brushed nickel-plated housing and the acrylic diffuser for even light distribution.
Funtzionamendu-argibideak
The Ikea VIRRMO LED Ceiling Lamp is designed for simple operation via a standard wall switch connected to its power supply.
- Piztu/Itzaltzea: Erabili l-ra konektatutako hormako etengailuaamp's electrical circuit to turn the light on or off.
- Argiaren irteera: Lamp provides a consistent 800 lumens of warm white light at a color temperature of 2700K. It is not dimmable unless connected to a compatible dimming system (not included and requires professional installation).
- Energia-eraginkortasuna: The integrated LED technology ensures low power consumption (11 watts) and a long operational life.
Mantentzea
To ensure the longevity and optimal performance of your VIRRMO LED Ceiling Lamp, jarraitu mantentze-jarraibide erraz hauek:
- Garbiketa: Deskonektatu korrontea garbitu aurretik. Garbitu lamp bigun batekin, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or acrylic diffuser.
- LED bizitza: The integrated LED light source is designed to last approximately 15,000 hours. The LEDs are not replaceable. If the light source fails, the entire fixture should be replaced.
- Ikuskapena: Periodically check for any loose connections or signs of wear. If any issues are found, consult a qualified electrician.
Arazoak konpontzea
If your VIRRMO LED Ceiling Lamp espero bezala funtzionatzen ez badu, kontuan hartu arazo eta irtenbide ohikoenak:
- Argia ez da pizten:
- Check if the wall switch is in the 'ON' position.
- Verify that the main circuit breaker for the lighting circuit is not tripped.
- Ensure all electrical connections are secure. If unsure, consult a qualified electrician.
- Argi keinukaria:
- Ensure all electrical connections are tight. Loose connections can cause flickering.
- Egiaztatu lamp is not connected to an incompatible dimmer switch.
- Distira murriztua:
- Lamp provides a fixed brightness of 800 lumens. If it appears dimmer, ensure the diffuser is clean.
If problems persist after attempting these solutions, contact Ikea customer support or a qualified electrician.
Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Modelo zenbakia | 90455661 |
| Marka | Ikea |
| Argi Mota | LED |
| Distira | 800 lumen |
| Kolore argia | Zuri epela (2700K) |
| Kolore errendatze indizea (CRI) | >80 |
| Energia-kontsumoa | 11 Watt |
| Bizi-iraupen estimatua | 15,000 hours (approx. 10 years at 3 hours/day) |
| Neurriak (diametroa x altuera) | 36 cm x 7.6 cm (14 hazbete x 3 hazbete) |
| Materiala | Acrylic plastic, Steel (Brush finish nickel-plated, Powder coating) |
| Barruko/Kanpoko erabilera | Barruan |
| Energia iturria | Kable elektrikoa |
| Jatorrizko Herrialdea | Txina |
Bermearen informazioa
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or visit the official Ikea webgunea. Bermearen estaldurak normalean materialen eta fabrikazioaren akatsak barne hartzen ditu erabilera normalaren pean.
Bezeroarentzako Arreta
If you have any questions, require assistance with installation, or need to report a defect, please contact Ikea customer support through their official website or the contact information provided with your purchase. When contacting support, please have your model number (90455661) and purchase details readily available.
Informazio gehiago eta harremanetarako datuak aurki ditzakezu webgune ofizialean Ikea webgunea.