Produktua amaituview
The ACT USB-C 90-Degree Cable (Model AC7406) is designed for connecting USB-C enabled devices, offering both high-speed data transfer and efficient power delivery. This 1-meter cable features one straight USB-C connector and one convenient 90-degree angled USB-C connector, reducing strain and improving usability in tight spaces. It supports USB 3.2 Gen1 for data transfer speeds up to 5Gbps and Power Delivery (PD) up to 60W, making it suitable for charging smartphones, tablets, and even some laptops. Additionally, it supports DisplayPort Alternate Mode for video output.
Image: The ACT USB-C 90-degree cable, showcasing its straight and angled connectors.
Konfigurazio Argibideak
To set up your ACT USB-C 90-Degree Cable, follow these simple steps:
- Portuak identifikatu: Locate the USB-C ports on your devices (e.g., laptop, smartphone, external monitor, power adapter).
- Connect to Device 1: Insert either the straight or the 90-degree angled USB-C connector into the USB-C port of your primary device (e.g., laptop for data transfer, power adapter for charging). The 90-degree connector is ideal for devices where space is limited or to prevent cable bending.
- Connect to Device 2: Insert the other end of the cable into the USB-C port of the secondary device (e.g., external hard drive, smartphone, monitor).
- Egiaztatu konexioa: Ensure both connectors are fully inserted into their respective ports. The connection is reversible, so there is no "wrong" way to plug in a USB-C connector.
Image: The ACT USB-C cable connected to a laptop and an external device, demonstrating a typical setup for charging or data transfer.
Image: The ACT USB-C cable connecting a laptop to an external monitor, illustrating its capability for display output via DisplayPort Alternate Mode.
Funtzionamendua
Charging (Power Delivery up to 60W)
This cable supports USB Power Delivery (PD) up to 60W (20V@3A), allowing for fast charging of compatible devices. Connect one end of the cable to a USB-C power adapter and the other end to your device (smartphone, tablet, or laptop) to initiate charging. The cable automatically negotiates the optimal power profile konektatutako gailuekin.
- Supported Power Delivery Profiles: 5.0V@3.0A, 9.0V@3.0A, 12.0V@3.0A, 15.0V@3.0A, 20.0V@3.0A.
Data Transfer (5Gbps)
The cable supports USB 3.2 Gen1 (formerly USB 3.0) for high-speed data transfer up to 5 Gigabits per second (Gbps). This is approximately 10 times faster than standard USB 2.0. To achieve these speeds, ensure both connected devices have USB 3.2 Gen1 or higher compatible USB-C ports.
Display Output (DisplayPort Alternate Mode)
The ACT USB-C cable supports DisplayPort Alternate Mode (DP Alt Mode), enabling video output from compatible USB-C devices to an external display. Connect your USB-C laptop or tablet to a monitor with a USB-C input or a USB-C to DisplayPort/HDMI adapter (not included) to extend or mirror your display.
Zainketa eta Mantentzea
Proper care of your cable will ensure its longevity and optimal performance:
- Saihestu bihurgune zorrotzak: Do not bend the cable sharply, especially near the connectors, as this can damage internal wires.
- Behar bezala gordetzea: When not in use, coil the cable loosely. Avoid tangling or knotting.
- Mantendu konektoreak garbi: Periodically inspect the USB-C connectors for dust or debris. Use a soft, dry cloth or a small brush to gently clean them if necessary.
- Kontuz maneiatu: Deskonektatzean, tira beti konektorearen karkasatik, ez kabletik bertatik.
- Saihestu muturreko tenperaturak: Do not expose the cable to extreme heat or cold, which can degrade the cable materials.
Image: The ACT USB-C cable coiled neatly, demonstrating proper storage to prevent damage.
Arazoak konpontzea
If you encounter issues with your ACT USB-C cable, refer to the following table for common problems and solutions:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Gailua ez da kargatzen edo poliki kargatzen ari da. |
|
|
| Slow data transfer speed. |
|
|
| No display output to external monitor. |
|
|
Zehaztapen Teknikoak
| Marka | EKINTZA |
| Modelo zenbakia | AC7406 |
| Kable mota | USB-C USB-C-ra |
| Konektore mota | One straight, one 90-degree angled USB-C (Male-to-Male) |
| Kablearen luzera | 1 metro |
| Datuen transferentzia-tasa | Gehienez 5 Gbps (USB 3.2 Gen1) |
| Potentzia Entrega | Up to 60W (20V@3A) |
| Ezaugarri bereziak | Fast Charging, Data Transfer, DisplayPort Alternate Mode (DP Alt Mode) |
| Kolorea | Beltza |
| Ziurtagiriak | USB-IF Ziurtagiria |
Bermea eta Laguntza
ACT is committed to delivering reliable connectivity solutions. All ACT products comply with international standards and EU legislation, ensuring high quality and safety.
Produktu hau a 2-5 year manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official ACT webgunea.
For further support, technical assistance, or to view our full range of products, please visit the ACT Connectivity webgunea:
Image: Product packaging for the ACT USB-C cable, showing the brand logo and weblaguntzarako gunea.
