LEDONE Remote Control User Manual

1. Sarrera

This manual provides comprehensive instructions for the LEDONE Remote Control, designed for use with Motion Detection, UFO High Bay, Parking Lot Light, and Linear High Bay Lights (specifically HD406VRH Sensor compatible). This remote enhances convenience and control over your lighting systems, allowing for customization of various settings to optimize performance and energy efficiency in commercial spaces.

2. Produktuaren ezaugarriak

• Direct control over LED high bay light processes.
• Four pre-programmed fixed scene modes for automatic settings.
• Controls UFO High Bay lights and integrated motion detection sensors.
• Customizable brightness and motion sensor settings.
• Includes essential functions: On/Off, Auto mode, and Reset for straightforward operation.

3. Konfigurazioa

3.1 Bateriaren instalazioa

The LEDONE Remote Control requires 'A' type batteries (not included). To install:

1. Kokatu bateriaren konpartimentuaren estalkia urrutiko agintearen atzealdean.
2. Irristatu estalkia geziak adierazten duen norabidean.
3. Insert the 'A' batteries, ensuring correct polarity (+ and -) as marked inside the compartment.
4. Jarri bateriaren konpartimentuaren estalkia ondo sartu arte klik egin arte.

3.2 Hasierako konexioa

The remote control is designed to work seamlessly with compatible LEDONE UFO High Bay and Linear High Bay Lights equipped with HD406VRH sensors. No complex pairing is typically required; the remote should function upon battery installation and being within range of the compatible light fixture.

4. Funtzionamendu-argibideak

Ezagutu urrutiko agintearen diseinua:

Figure 1: LEDONE Remote Control Layout

4.1 Oinarrizko funtzioak

• ON/OFF: Press to toggle the connected light fixture on or off.
• Modu automatikoa: Activates the automatic operation mode, utilizing the sensor's default or previously set parameters.
• Berrezarri: Resets all settings on the connected light fixture to their factory default values.
• Distira (+/-): Adjusts the light output intensity.

4.2 Ezarpen aurreratuak

The remote allows for precise customization of sensor and lighting parameters:

• Hasi: Initiates the application of selected settings.
• Memoria: Saves the current custom settings for quick recall.
• Aplikatu: Applies the settings stored in memory or the currently selected custom settings.

Detekzio-eremua

Select the desired motion detection sensitivity:

• %25, %50, %75, %100: Choose the percentage of the sensor's maximum detection range.

Eutsi Denbora

Sets the duration the light remains at full brightness after motion is detected and before dimming or turning off:

• 5s, 30s, 1min, 3min, 5min, 10min, 15min, 30min: Select the hold time in seconds or minutes.

Stand-by Iluntze-maila

Determines the light output level during the stand-by period (after hold time and before turning off):

• %10, %20, %30, %50: Set the dimming percentage.

Stand-by Epea

Sets the duration the light remains at the stand-by dimming level before turning off completely:

• 0s, 10s, 30s, 1min, 5min, 10min, 30min, +∞: Select the stand-by period. '+∞' indicates the light will remain at the stand-by dimming level indefinitely.

Eguneko argi-sentsorea

Configures the ambient light threshold at which the motion sensor will activate the light:

• 2Lux, 10Lux, 30Lux, 50Lux, 80Lux, 120Lux: Light will only turn on if ambient light is below the selected Lux level.
• Desgaitu: The daylight sensor is deactivated, and the light will respond to motion regardless of ambient light.

Proba (2s)

Activates a 2-second test mode to verify sensor functionality and current settings.

5. Mantentzea

To ensure optimal performance and longevity of your LEDONE Remote Control:

• Garbiketa: Garbitu urrutiko agintea oihal leun eta lehor batekin. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Bateria ordezkatzea: Replace batteries when the remote's response becomes sluggish or inconsistent. Always use new 'A' type batteries.
• Biltegiratzea: Gorde urrutiko agintea leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik babestuta.
• Saihestu hezetasuna: Ez jarri urrutiko agintea uretan edo hezetasun handiaren eraginpean.

6. Arazoak

If you encounter issues with your LEDONE Remote Control, refer to the following common problems and solutions:

• Urrunekoek ez dute erantzuten:
  • Egiaztatu bateriaren instalazioa eta ordeztu bateriak behar izanez gero.
  • Ensure there are no obstructions between the remote and the light fixture's sensor.
  • Verify that the light fixture is powered on and functioning correctly.
• Settings not applying:
  • Ensure you are pressing the 'Apply' or 'Start' button after making changes.
  • Confirm the remote is within effective range of the light fixture.
  • Try resetting the light fixture using the 'Reset' button on the remote, then re-apply settings.
• Eremu mugatua:
  • Ordeztu bateriak berriekin.
  • Ziurtatu ez dagoela interferentzia iturri indartsurik (adibidez, beste haririk gabeko gailurik) inguruan.

7. Zehaztapenak

8. Bermea eta Laguntza

LEDONE is committed to providing quality lighting solutions and customer satisfaction. Our products are designed for optimal performance and safety. For any inquiries, technical assistance, or warranty information, please contact LEDONE customer service. LEDONE is based in California, offering worry-free services for our products.