1. Sarrera
The DGODRT 4-Port VGA KVM Switch allows you to control up to four computers or laptops using a single VGA monitor, keyboard, mouse, and other USB 2.0 devices. This device is designed to streamline your workspace by eliminating the need for multiple peripherals for each computer. It supports high resolutions and offers convenient switching methods for efficient operation.

Figure 1: DGODRT 4-Port VGA KVM Switch with accessories.
2. Paketearen edukia
Mesedez, egiaztatu elementu guztiak zure paketean daudela:
- VGA KVM Switch (1 unit)
- 2-in-1 KVM USB Cables (4 units)
- Wired Switch Button (1 unit)
- Erabiltzailearen eskuliburua (unitate 1)
3. Produktuaren ezaugarriak
- Manages 4 computers/laptops with 1 monitor and 3 USB 2.0 devices (keyboard, mouse, printer, scanner, hard drives).
- Supports resolutions up to 1920 x 1440, including super widescreen displays.
- Features DDC support and high-quality auto-identification.
- Plug and Play functionality; no driver or external power supply required.
- Compatible with Windows 10 / 8 / 8.1 / 7 / XP / Vista / Mac / Linux systems.
- Offers two switching methods: front panel button and wired desktop controller.
- Integrated 2-in-1 KVM USB cables for a tidy workspace.
4. Konfiguratzeko argibideak
Follow these steps to connect your DGODRT 4-Port VGA KVM Switch:
- Itzali gailuak: Ensure all computers and the monitor are powered off before making any connections.
- Konektatu monitorearekin: Connect your VGA monitor to the 'Output' VGA port on the KVM switch.
- Konektatu periferikoak: Plug your USB keyboard, USB mouse, and any other USB 2.0 devices (e.g., printer, scanner) into the 'USB 1', 'USB 2', and 'USB 3' ports on the front of the KVM switch.
- Ordenagailuak konektatu: Use the provided 2-in-1 KVM USB cables to connect each computer to the KVM switch. Each cable has a VGA connector and a USB connector. Connect the VGA end to a VGA output port on your computer and the USB end to a USB port on the same computer. Then, connect the other end of the 2-in-1 cable to the corresponding 'PC 1', 'PC 2', 'PC 3', or 'PC 4' input on the KVM switch.
- Konektatu kable bidezko urrutiko agintea (aukerakoa): If desired, plug the wired desktop controller into the 'Key Connection' port on the KVM switch. This allows for remote switching.
- Piztu: Power on the KVM switch (if applicable, though it's typically bus-powered) and then power on your computers and monitor.

Figure 2: Connection Diagram for the 4-Port VGA KVM Switch.

Figure 3: Front and Rear Panel Layout with Port Labels.
5. Funtzionamendu-argibideak
The DGODRT 4-Port VGA KVM Switch offers two convenient methods for switching between connected computers:
5.1. Front Panel Button Switching
Press the numbered buttons on the front panel of the KVM switch (1, 2, 3, or 4) to select the corresponding computer. An LED indicator will illuminate next to the selected port, showing which computer is currently active.
5.2. Wired Desktop Controller Switching
The included wired desktop controller provides a flexible way to switch computers without needing to reach the KVM unit itself. Simply press the desired numbered button (1, 2, 3, or 4) on the remote to switch to that computer. The remote also has an LED indicator to show the active port.

Figure 4: Demonstrating the two switching methods: on-unit button and wired remote.
5.3. Sistemaren bateragarritasuna
This KVM switch is designed for broad compatibility and supports a wide range of operating systems, including:
- Windows 10
- Windows 8/8.1
- Windows 7
- Windows XP
- Windows Vista
- Mac OS
- Linux

Figure 5: Supported Operating Systems.
6. Mantentzea
To ensure the longevity and optimal performance of your KVM switch, follow these general maintenance guidelines:
- Garbiketa: Use a soft, dry cloth to clean the exterior of the KVM switch. Avoid using liquid cleaners or aerosols, which may damage the device.
- Aireztapena: Ensure the KVM switch is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
- Kableen kudeaketa: Keep cables organized and untangled to prevent damage to the connectors and ensure stable connections.
- Biltegiratzea: When not in use for extended periods, store the KVM switch in a cool, dry place away from direct sunlight and extreme temperatures.
7. Arazoak
If you encounter issues with your DGODRT 4-Port VGA KVM Switch, please refer to the following common troubleshooting tips:
- Pantailarik ez/kezka egiten:
- Ensure all VGA cables are securely connected to both the KVM switch and the computers/monitor.
- Verify that the monitor is powered on and set to the correct input source.
- Try restarting the connected computers and the KVM switch.
- Check if the resolution setting on your computer is supported by the KVM switch (up to 1920x1440).
- Teklatuak/Saguak ez du erantzuten:
- Ensure USB cables from computers to the KVM switch are properly connected.
- Verify that the keyboard and mouse are plugged into the correct USB ports on the KVM switch.
- Try unplugging and re-plugging the keyboard/mouse from the KVM switch.
- Oharra: It is not recommended to use illuminated mechanical keyboards due to potential power overload. If experiencing issues with such a keyboard, try a standard keyboard.
- Aldaketa arazoak:
- Ensure the wired desktop controller is securely plugged into the KVM switch.
- Press the desired port button firmly on either the KVM unit or the remote.
- Konexio arazo orokorrak:
- Ensure all cables are the original ones provided with the KVM switch, especially the 2-in-1 KVM USB cables.
- If possible, test with different cables or peripherals to isolate the issue.
If the problem persists after trying these steps, please contact DGODRT customer support for further assistance.
8. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | KS204V |
| Produktuaren neurriak (L x W x H) | 3.07 x 7.01 x 7.4 hazbete |
| Pisua | 3.53 ontza |
| Max Ebazpena | 1920 x 1440 |
| USB atakak | 3 x USB 2.0 |
| VGA Ports | 4 (Sarrera) / 1 (Irteera) |
| Aldatzeko metodoa | Front Panel Button, Wired Remote Button |
| Bolumen eragileatage | 5 voltio (DC) |
| Plug and Play | Bai |
| Fabrikatzailea | DGODRT |
9. Bermea eta Laguntza
For warranty information and technical support, please refer to the documentation included with your purchase or contact DGODRT directly. Contact details can typically be found on the manufacturer's official webgunean edo produktuaren ontzian.
Produktuari buruzko edozein zalantza argitzeko, jar zaitez gurekin harremanetan.