AEG SMT 355 Haridun Zerra Elektrikoa Argibideen Eskuliburua

Sarrera

This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your AEG SMT 355 Corded Electric Chop Saw. Please read this manual thoroughly before operating the tool to ensure safe and efficient use. Keep this manual for future reference.

The AEG SMT 355 is a powerful corded electric chop saw designed for cutting various materials including metal, stainless steel, and wood, with a maximum cutting depth of 115 mm.

Segurtasun Jarraibide Orokorrak

Jarraitu beti oinarrizko segurtasun neurriak sute, deskarga elektriko eta lesio pertsonalen arriskua murrizteko. Honek barne hartzen ditu, baina ez da hauetara mugatzen:

• Erabili babes pertsonaleko ekipamendu (EPI) egokia, hala nola segurtasun betaurrekoak, entzumen-babesak eta eskularruak.
• Ziurtatu lan-eremua garbi, ondo argiztatuta eta oztoporik gabe dagoela.
• Mantendu haurrak eta ingurukoak operazio-eremutik urrun.
• Ez erabili tresna elektrikoak atmosfera lehergarrietan, adibidez, likido sukoiak, gasak edo hautsak daudenean.
• Deskonektatu beti entxufea energia-iturritik doikuntzak egin, osagarriak aldatu edo tresna gorde aurretik.
• Secure the workpiece firmly before cutting.
• Use only cutting wheels designed for the AEG SMT 355 and suitable for the material being cut.

Produktuaren osagaiak

Familiarize yourself with the main components of your AEG SMT 355 chop saw.

1. irudia: Aurrealdea view of the AEG SMT 355 Corded Electric Chop Saw, showing the cutting wheel, guard, handle, and base.

2. Irudia: Atzealdea view of the AEG SMT 355 Corded Electric Chop Saw, highlighting the motor housing and power cord connection.

3. irudia: hurbileko planoa view of the integrated vise and clamping mechanism on the AEG SMT 355, used for securing workpieces.

Konfigurazioa eta Muntaketa

1. Despaketatzea: Carefully remove the chop saw from its packaging. Inspect for any damage that may have occurred during shipping. Report any damage to your retailer immediately.
2. Muntaketa: For stability and safety, it is recommended to securely mount the chop saw to a workbench or a stable stand using appropriate fasteners. Ensure the mounting surface can support the weight of the tool and the forces generated during operation.
3. Palaren instalazioa (aurrez instalatuta ez badago):
   • Ziurtatu tresna energia-iturritik deskonektatuta dagoela.
   • Altxatu pala babeslea.
   • Sakatu ardatzaren blokeatzeko botoia ardatza biratzea eragozteko.
   • Use the provided wrench to loosen and remove the blade retaining nut and outer flange.
   • Place the new 355 mm cutting wheel onto the spindle, ensuring the rotation arrow on the blade matches the direction of rotation indicated on the saw.
   • Reinstall the outer flange and blade retaining nut. Tighten securely with the wrench while holding the spindle lock.
   • Jaitsi pala babeslea.
4. Vise Adjustment: The integrated vise can be adjusted to secure various workpiece sizes. Loosen the locking handle, slide the vise jaw to the desired position, and tighten the handle firmly to secure the workpiece.

Funtzionamendu-argibideak

1. Pieza prestatzea:
   • Ensure the workpiece is clean and free of debris.
   • Mark the cutting line clearly.
   • Place the workpiece firmly against the fence and secure it tightly with the vise mechanism. Ensure the workpiece is stable and will not shift during the cut.
2. Potentzia-konexioa: Connect the chop saw to a suitable power outlet (230V, 50Hz). Ensure the power circuit can handle the 2300 Watts power consumption.
3. Zerra martxan jartzea:
   • Eutsi heldulekua irmo.
   • Press the trigger switch to start the motor. Allow the blade to reach full speed (3800 RPM) before beginning the cut.
4. Ebaki bat egitea:
   • Slowly and steadily lower the rotating blade into the workpiece. Do not force the cut; let the saw do the work.
   • Maintain a consistent downward pressure.
   • Once the cut is complete, release the trigger switch and allow the blade to stop rotating completely before raising the saw arm.
5. Zerra gelditzea: Release the trigger switch. The blade will stop rotating. Wait until the blade has completely stopped before moving the workpiece or making any adjustments.

Mantentzea

Regular maintenance ensures the longevity and safe operation of your chop saw.

• Garbiketa: After each use, disconnect the power and clean the saw. Remove dust, chips, and debris from the motor vents, blade guard, and base using a brush or compressed air. Do not use solvents that could damage plastic parts.
• Palan ikuskatzea: Regularly inspect the cutting wheel for wear, cracks, or damage. Replace worn or damaged blades immediately. Ensure the blade is always sharp and suitable for the material being cut.
• Vise and Clamp: Keep the vise mechanism clean and lubricated to ensure smooth operation.
• Elikatze kablea: Inspect the power cord for any signs of damage, cuts, or fraying. If damaged, have it repaired by a qualified technician.
• Karbonozko eskuilak: The motor's carbon brushes may need periodic inspection and replacement. Refer to a qualified service center for this procedure if you notice reduced power or excessive sparking.
• Biltegiratzea: Store the chop saw in a dry, secure location out of reach of children and unauthorized users.

Arazoak konpontzea

This section addresses common issues you might encounter. For problems not listed here, contact a qualified service technician.

Zehaztapen Teknikoak

Bermea eta Laguntza

Specific warranty terms and conditions for the AEG SMT 355 Corded Electric Chop Saw are typically provided with the product at the time of purchase or can be found on the official AEG website for your region. Please retain your proof of purchase for warranty claims.

For technical support, service, or spare parts, please refer to the contact information provided by your retailer or visit the official AEG website for authorized service centers in your area. This manual does not contain specific contact details for support.