Prime TNOREM02

Prime TNOREM02 Kanpoko Urrutiko Agintea 2 Entxufe eta Haririk gabeko Igorgailuarekin Erabiltzaile Eskuliburua

Model: TNOREM02

Sarrera

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Prime TNOREM02 Outdoor Remote Control with Receiver and Transmitter

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Segurtasun Informazioa

Produktu hau erabili aurretik, irakurri eta ulertu segurtasun-jarraibide guztiak. Jarraibide hauek ez jarraitzen badituzu, deskarga elektrikoak, sua edo lesio larriak gerta daitezke.

Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

Prime TNOREM02 Product Packaging

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Produktuaren Ezaugarriak

Close-up of Prime TNOREM02 Receiver Outlets

Irudia: Gertutik view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Konfigurazioa

  1. Aukeratu kokapena: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
  2. Hartzailea konektatu: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
  3. Konektatu gailuak: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattagKonektatutako gailuen potentzia ez da 1875 watt baino handiagoa.
  4. Prepare Transmitter: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.
Prime TNOREM02 Outdoor Remote Control in Use

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Funtzionamendu-argibideak

Using the Prime TNOREM02 is straightforward:

Mantentzea

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

  1. Locate the battery compartment on the back of the wireless transmitter.
  2. Using a small screwdriver or coin, carefully open the battery compartment cover.
  3. Remove the old CR2032 3V button-cell battery.
  4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
  5. Jarri bateriaren konpartimenduaren estalkia ongi.
  6. Test the remote control to ensure it is functioning correctly.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Arazoak konpontzea

ArazoaKausa posibleaIrtenbidea
Devices do not turn ON/OFF.
  • Transmitter battery is dead or incorrectly installed.
  • Receiver is not plugged in or not receiving power.
  • Devices plugged into receiver are not switched ON or are faulty.
  • Receiver is out of range of the transmitter.
  • Gainkarga-babesa aktibatu da.
  • Replace the CR2032 battery in the transmitter, ensuring correct polarity.
  • Verify the receiver is securely plugged into a working outdoor outlet.
  • Ensure connected devices are in the ON position (if applicable) and functional.
  • Move closer to the receiver unit. Reduce obstructions between the transmitter and receiver.
  • Unplug devices, wait a few minutes, then plug them back in. Reduce the total load.
Haririk gabeko irismen murriztua.
  • Igorlearen eta hartzailearen arteko oztopoak.
  • Weak transmitter battery.
  • Beste haririk gabeko gailuen interferentziak.
  • Oztopoak ahalik eta gehien murrizteko, mugitu hartzailea edo igorlea.
  • Ordeztu transmisorearen bateria.
  • Move the unit away from other strong wireless signals.
Unit stopped working after a period of use.
  • Barne osagaien porrota.
  • Exposure to extreme weather conditions (e.g., direct lightning strike).
  • Overload damage.
  • If basic troubleshooting fails, the unit may require replacement.
  • Ensure the unit is installed in a location that offers reasonable protection from severe weather.
  • Verify connected devices do not exceed the maximum electrical rating.

Zehaztapenak

EzaugarriXehetasuna
Modelo zenbakiaTNOREM02
MarkaLehena
Saltoki kopurua2 (3-prong grounded)
Hari MotaSJTW 14/3 Gauge
Entxufe motaRight Angle, Grounded
ErabileraKanpoan
Max Watts1875 Watt
Max Amps15 Amps
Volt maximoa125 Volt
Max Horsepower1 / 3 HP
Wireless RangeGehienez 80 oin
Transmisorearen bateriaCR2032 3V Button-Cell
Produktuaren neurriak8 x 6.2 x 2.1 hazbete (gutxi gorabehera)
Elementuaren pisua0.01 ounces (for remote control)
Konektibitate TeknologiaBluetootha
ZiurtagiriakNot explicitly detailed, but designed for outdoor electrical use.

Bermea eta Laguntza

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime webgunea edo jarri harremanetan haien bezeroarentzako arreta-kanalekin.

Erlazionatutako dokumentuak - TNOREM02

Aurreview PRIME SmartOutlets + Urruneko Kontrola Erabiltzailearen Gida eta Araudi Informazioa
PRIME SmartOutlets + Urruneko Kontrolerako gida osoa, konfigurazioa, berriro sinkronizazioa, bermea eta FCC/IC araudiaren betetzea barne hartzen dituena. Ikasi zure etxe adimenduneko gailuak nola erabili eta arazoak konpontzen.
Aurreview PRIME 2 entxufeko hormako txorrota USB kargagailuekin - Erabiltzailearen gida eta bermea
Prime Wire & Cable, Inc.-en PRIME 2 Outlet Wall Tap-erako USB kargagailuekin (USB05 modeloa) argibide zehatzak, araudi-informazioa eta bermearen xehetasunak.
Aurreview PRIME-750B Elikatze-iturria: Hasiera azkarreko gida eta segurtasun-informazioa
PRIME-750B elikatze-iturri unitatearen gida osoa, segurtasunari buruzko informazio garrantzitsua, instalazio-urratsak, osagaien konexioa, pizteko argibideak eta zehaztapen teknikoak biltzen dituena. Segurtasun elektrikoari, aireztapenari, hardwarearen bateragarritasunari eta babes-ezaugarriei buruzko xehetasunak barne hartzen ditu.
Aurreview PRIME SmartOutlets instalazio eta segurtasun informazioa
PRIME SmartOutlets urrutiko aginte bidezko kanpoko entxufe adimendunen instalazio-argibideak, segurtasun-informazioa eta zehaztapenak. Konfigurazio-gida, aplikazioaren konexioa eta araudi-betetzea barne hartzen ditu.
Aurreview Prime TNRCCD21 hargailu entxufagarriaren eta urrutiko agintearen erabiltzailearen eskuliburua
Prime TNRCCD21 hargailu entxufagarriaren eta urrutiko aginte sistemaren erabiltzailearen eskuliburu osoa. Konfigurazio argibideak, funtzionamendu gida, aholku lagungarriak, bateria ordezkatzea, FCC/IC betetzea eta bermearen informazioa barne hartzen ditu.
Aurreview Prime EZ-Set Barruko Tenporizadore Digitala TNIDP12: Erabiltzailearen Eskuliburua eta Programazio Argibideak
Prime EZ-Set Barruko Tenporizadore Digitalaren (TNIDP12 modeloa) erabiltzailearen eskuliburua eta argibideak. Ikasi nola programatu pizteko/itzaltzeko ordu pertsonalizatuak, erabili aurrezarritako aukerak, atzerako kontaketa funtzioak eta ulertu segurtasun jarraibideak eta bermearen informazioa.