Gaggenau 200 Series Wall Hood

Product Overview

A stainless steel wall-mounted hood designed for efficient kitchen ventilation.

Model: AW 230 790

Material: Stainless steel

Width: 36" (90 cm)

HVI CFM: 360 (High Speed)

Functionality: Air extraction / Air recirculation

Included: Standard duct cover

Installation Accessories

• AD 200 322: Stainless steel duct cover extension, Length: 3' 3 3/8" (1000 mm).
• AD 200 392: Stainless steel ceiling collar, designed to cover screws on the duct cover and accommodate uneven ceiling gaps.

Optional Accessories

• Part #17004654: Air recirculation module with activated charcoal filter, installed on the inside of the duct cover.
• Part #11049036: Activated charcoal filter for recirculation module (AA442810).
• AD 223 356: Adapter for roof inclination (left/right).
• AD 223 366: Adapter for roof inclination (front/back).

Good to Know

The hood must be larger than or equal to the cooktop size. Please refer to the ventilation chapter for specific requirements.

HVI Performance Values (CFM & SONES)

Model AW 230 790 (Blower Internal)

Model AW 230 790 (Blower Internal)

Highlights

• Highly efficient extraction of cooking vapors.
• Low-noise blower.
• Patented filter technology with high level of grease absorption.
• Rim extraction filter: flat and easy-to-clean stainless steel surface.
• Dimmable LED light for optimum illumination of the entire cooktop.
• Supports air extraction or recirculation systems.
• Air recirculation module with activated charcoal filters offers a quiet and highly efficient solution with odor reduction, comparable to air extraction mode, and features long replacement intervals.

Features

• Three electronically controlled power levels and an intensive mode.
• Grease filter saturation indicator.
• Patented rim extraction filter, dishwasher-safe.
• Warm white LED light (3,600 K), continuously dimmable.
• Airflow-optimized interior for efficient air circulation.
• Easy mounting system for simple installation and alignment.
• Includes a one-way flap.

Planning Notes

• The hood includes a two-part duct cover with dimensions ranging from 22 15/16" (582 mm) to 34" (864 mm).
• Individual planning solutions can be accommodated using the optional duct cover accessory AD200322 or by shortening the lower edge of the telescopic duct cover.
• Minimum clearance above gas or induction cooktops is 30".
• The air recirculation module with activated charcoal filter can be installed on the external duct cover or on the inside of the duct cover.

Rating

Total rating: 425 W.

Total Amps: 3 A.

Voltage: 120 V / 60 Hz.

Connecting cable: 51 3/16" with plug.

Diagrams and Dimensions

Diagram 1: Exhaust-air outlet and dimensions

This diagram illustrates the wall hood with its exhaust outlet and various dimensions. Key measurements include:

• Overall Width: 35 7/16" (900 mm)
• Exhaust Outlet: 5 13/16" (1300) [Note: The value '1300' in parentheses for the exhaust outlet diameter appears unusually large and may be a typo in the source document.]
• Other dimensions provided are: 132/16" (342), 1113/16" (300), 93/4" (247), 13/4" (45), 81/4" (209), 197/16" (493), 133/4" (349), 151/2" (393), 95/8" (245), 1213/16" (326), 1415/16" (380), 139/16" (345), 1911/16" (500), 913/16" (250), 13/16" (30), 9/16" (14), 113/16" (46), max. 13/16" (max. 20).

* Suitable for ceiling heights of 7.4 ft. (2.27 m) to 8.4 ft. (2.55 m); Specifications refer to a distance from floor to lower duct cover edge of 5.2 ft. (1.60 m).

Diagram 2: Installation view with duct cover

This diagram shows the hood installed with a standard duct cover. The duct cover height ranges from 32 3/16" to 45 3/8" (818 - 1152 mm).

* Suitable for ceiling heights of 8 ft. (2.45 m) to 9 ft. (2.75 m); Specifications refer to a distance from floor to lower duct cover edge of 5.2 ft. (1.60 m).

Diagram 3: Installation view with extended duct cover

This diagram illustrates the hood installed with an extended duct cover. The duct cover height ranges from 40 15/16" to 54 1/8" (1040 - 1374 mm).

* Suitable for ceiling heights of 8.7 ft. (2.64 m) to 9.7 ft. (2.97 m); Specifications refer to a distance from floor to lower duct cover edge of 5.2 ft. (1.60 m).

Additional Information

Numbers indicated inside parenthesis ( ) = mm.

Visit www.gaggenau.com/us for more information.

Revised: March 2025

Gaggenau reserves the right to change product materials and specifications at any time without notice. Consult the product's installation instructions for final dimensional data and other details prior to making cutouts. For warranty information, please refer to the Use & Care manual or the Gaggenau website. For more information on Gaggenau products, visit www.gaggenau.com or call 1-877-442-4436.