FlySpark-logo

FlySpark F4 V1 Stack Flight Controller

FlySpark-F4-V1-Stack-Flight-Controller-productTehnilised andmed

  • Toote nimi:
    FlySpark F4 V1 BLS 60A virn
  • AI funktsioonid:
    Sensor Fusion, PID Autotuning, Adaptive Filtering
  • Tarkvara tugi:
    Betaflight, INAV, Ardupilot, EMU-flight, SkyBrush
  • ESC Communication:
    BLHeli_S Bluetooth ja USB-C
  • Ühenduvus:
    3-6S LiPo
  • Mõõtmed:
    47.8 mm (P) x 47.5 mm (L) x 18.3 mm (K)
  • Paigaldamine:
    30.5 x 30.5 mm 4 mm auguga
  • Kaal:
    34 g

FlySpark-F4-V1-Stack-Flight-Controller-fig-9 FlySpark-F4-V1-Stack-Flight-Controller-fig-10

Toote kasutusjuhised

FlySpark F4 V1 lennukontroller

Paigutus:
Refer to the user manual for the layout of the flight controller.

Välisseade:
Connect peripherals as per the provided diagram.

Rakenduse ja FC konfiguratsioon:
Use the recommended apps and follow the configuration instructions.

FC püsivara värskendus:
Connect the flight controller to a PC via USB for firmware updates.

FLYPARK BLS 60A 4-IN-1 ESC

Paigutus:
Check the layout guide in the manual for proper installation.

Ühendus mootorite ja toitekaabliga:
Connect motors and power cables securely.

ESC konfiguratsioon:
Use the FlySpark app for ESC configuration settings.

ESC püsivara värskendus:
Follow the provided steps to update the firmware for ESC.

FlySpark F4 V1 BLS 60A virnFlySpark-F4-V1-Stack-Flight-Controller-fig-1

Tehnilised andmed läbiviewFlySpark-F4-V1-Stack-Flight-Controller-fig-20

FlySpark-F4-V1-Stack-Flight-Controller-fig-2 FlySpark-F4-V1-Stack-Flight-Controller-fig-3

pakettFlySpark-F4-V1-Stack-Flight-Controller-fig-4.1

  • FlySpark F4 V1 Flight Controller x 1
  • FlySpark BLS 60A 4-in-1 ESC x 1
  • 35 V 1000 uF madala ESR-i kondensaator x 1
  • M3 nailonmutter x 4
  • SH 1.0 mm 25 mm pikkune 8 kontaktiga kaabel (FC-ESC ühenduse jaoks) x 1 SH 1.0 mm 75 mm pikkune 6 kontaktiga kaabel* x 1
  • M3*30mm sisekuuskantkruvid x 4
  • DJI 6 kontaktiga kaabel (80 mm) x 1
  • XT60 toitekaabel (100 mm) x 1

FlySpark-F4-V1-Stack-Flight-Controller-fig-5.2

FC ühendusskeemFlySpark-F4-V1-Stack-Flight-Controller-fig-6

FC ja ESC ühenduste juhend

1. meetod:

  • Using 8.Pin JST CableFlySpark-F4-V1-Stack-Flight-Controller-fig-7

2. meetod:

Otsejootmine

  • Jootke 8 traati mõlema otsa 8 padja külge, järgides allolevaid padja määratlusiFlySpark-F4-V1-Stack-Flight-Controller-fig-8

Lennujuhi tehnilised andmed

FlySpark-F4-V1-Stack-Flight-Controller-fig-11.2

  • Kasutage O6 õhuseadmega kaasas olevat 3-pin kaablit FlySpark-F4-V1-Stack-Flight-Controller-fig-12.1
  • Kasutage FlySpark F6 V4 BLS 1A Stackiga kaasas olevat 60-pin kaablit

FlySpark-F4-V1-Stack-Flight-Controller-fig-13

F C Firmware  update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:

  • Use a USB cable to connect the FlySpark F4 VI flight controller to your PC

Open Betaflight I INAV Configurator.

  • . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.

Navigate to Firmware Flashing:

  • In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.

Select Target and Flash Firmware:

  •  Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
  • Initiate the firmware flashing process.

Märkus.
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be  performed using a USB connection to your PC.

FlySpark-F4-V1-Stack-Flight-Controller-fig-14

Flyspark BLS 60A 4-in-l ESCFlySpark-F4-V1-Stack-Flight-Controller-fig-15

Ühendus mootorite ja toitekaabligaFlySpark-F4-V1-Stack-Flight-Controller-fig-16

ESC Specs FlySpark F4 V1 BLS 60A StackFlySpark-F4-V1-Stack-Flight-Controller-fig-17

ESC püsivara värskendus
See 8-bitine 50A ESC on eelsalvestatud BLHeliS-i püsivaraga, kuid seda saab ka Bluejay püsivarasse flashida, pakkudes RPM-filtreerimist ja kahesuunalist Dshot-tuge. Püsivara värskendamiseks järgige neid samme.

  1. Prepare Your Drone:
    Remove all propellers from your drone for safety.
  2. Connect ESC to Flight Controller:
    Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly.
  3. Ühendage arvutiga:
    Use a USB Type-C cable to connect the flight controller to your computer.
  4. Access Firmware Configuration:
    Open the Chrome browser and visit: www.esc-configurator.com
  5. Flashing Steps:
    Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.

FlySpark-F4-V1-Stack-Flight-Controller-fig-21

ETTEVAATUST.FlySpark-F4-V1-Stack-Flight-Controller-fig-19

  • PROPELLERS OFF: REMOVE ALL PROPELLERS.
  • SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
  • FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
  • STABLE POWER: ENSURE STABLE POWER SUPPLY.
  • www.FlySpark.in

KKK-d

Kuidas ESC püsivara värskendada?

To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.

Dokumendid / Ressursid

FlySpark F4 V1 Stack Flight Controller [pdfKasutusjuhend
F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller

Viited

Jäta kommentaar

Teie e-posti aadressi ei avaldata. Kohustuslikud väljad on märgitud *